CRP919X scanner bidirectional scan tool from Launch

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • amzn.to/47BjO3Q
    Code: 1527CRP919(15%off)
    Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
    www.paypal.me/...
    what's up guys!!
    on todays video I will unbox and review the Launch CRP919X you can read codes erase codes perform bi-directional commands etc....
    31+ Repair Functions
    ECU Coding (Updates your device to get this new feature)
    Bi-directional Control (A-ctive Test)
    DoIP & CAN FD Compatible
    1996-2023 Vehicle Coverage
    Updated Hardware Configuration
    OE-Level All System Diagnostics
    Auto VIN Scan
    One-click WiFi Updating
    Full 10 OBD Modes
    Abundant Online Repair Database
    7 inch touch screen
    Android10.0 OS & 3+32GB memory
    6100mAh Battery
    Disclaimer:
    Due to factors beyond the control of FixitFelix, I cannot guarantee against improper use or unauthorized modifications of this information. FixitFelix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FixitFelix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FixitFelix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FixitFelix.

КОМЕНТАРІ • 19

  • @ReaganMM
    @ReaganMM 6 місяців тому +2

    This has been so helpful depending on the many that have been going thru. Thanks for the submission

  • @SholaBaby
    @SholaBaby Рік тому +1

    Thank you for the review. Pretty cool indeed.
    I have the LAUNCH 919X which I bought a little more than a year ago (August 2022). I find it quite useful and cool but my only problem with it so far is its inability to at least support the capacity of most AGM batteries available within the increment of 10 probably from 60Ah to 130Ah. My old battery was 90Ah that died recently and I replaced with a 100Ah capacity and then I found it difficult to register the exact capacity into the DME so the alternator could charge appropriately according to the rated capacity. Now all that LAUNCH 919X have available for AGMs are 70Ah, 90Ah and 105Ah. No 80Ah and no 100Ah, etc. I spoke with its customer service rep and he said he would have to advise his technical department to include more choices in the next software update. I hope they do. 😀

  • @FORTRAN4ever
    @FORTRAN4ever 2 місяці тому

    For an independent mechanic, a new vehicle is covered by a new car warranty which means that while under that warranty, the vehicle would covered by the new vehicle warranty for most likely 3 year, 36 month warranty. Eventually, the scanner would have to be updated or replaced after a few years anyway and old one sold or given away.. It could be updated as long as the price is affordable.

  • @tattooartist5870
    @tattooartist5870 Рік тому +1

    Thank you for taking the time to make this video, I have just bought this so great to see where everything is! Cheers from the U.K.!

  • @Atetus94
    @Atetus94 Рік тому +1

    Very good and detailed video :)

  • @lylegoodluck
    @lylegoodluck 10 місяців тому +1

    Can your force relearn on throttle body, test injector psi, check crank, cam, O2 sensors?

  • @VeniVidiVici444
    @VeniVidiVici444 25 днів тому

    I have refilled the additive fluid on my 2009 Volvo V70 1.6 diesel EcoDrive, but the car is still warning that the fluid is low. I have tried clearing the fault codes, but they keep coming back. I’m wondering how to reset the fluid counter using a LAUNCH CRP919X. Could you advise on how to proceed?

  • @jparker1823
    @jparker1823 Рік тому +2

    I was looking at the newer CRP919EBT, torn between that an the XTool D7S. Does Launch lose a lot of features if you let the subscription expire?

  • @benardblessing1201
    @benardblessing1201 Рік тому

    Good job ❤❤❤❤❤

  • @razvanturcu9871
    @razvanturcu9871 11 місяців тому

    What is the update fee after the free updates expire? Also, if you don't pay for the updates, will it still do bidirectional control and ecu coding?

  • @nickp7638
    @nickp7638 9 місяців тому

    Do you know if this scanner will allow you to put vehicles into service mode for the electronic parking break so you can replace the break pads. I just purchased one and I’m not seeing the function. Disappointing

  • @SholaBaby
    @SholaBaby Рік тому +2

    Also Bro. I would like you to do another video of the same scanner based on a BMW X5 E70 whenever you can. I would really appreciate it indeed.
    May peace be with you.
    Regards.

    • @eddnyc
      @eddnyc 10 місяців тому

      I just got the launch 431x 919E, I've been looking for someone that can explain using it on a BMW X5 E70 myself. so far no luck. Their is no help, no even from the people that sell it. and I don't understand how to add modules. If you find any thing let me know :)

  • @andrewg091
    @andrewg091 Рік тому +2

    Does this scanner snap screenshots or perform screen recording?

    • @FixitFelix529
      @FixitFelix529  Рік тому +1

      Yes

    • @drew0991utube
      @drew0991utube Рік тому +1

      Can you do a 1 minute demonstration video. Most reviews did not perform features.

  • @samsonmavuso.3747
    @samsonmavuso.3747 10 місяців тому

    Can I replace rear brake pads with this machine

  • @ladybreannakay3278
    @ladybreannakay3278 Місяць тому

    Prices