Nice build and great flying. Mounting plate for FC is a bit interesting. Overall design looks great. See max current was 84 amps. Definitely give it a workout. When OSD in view, was thinking it might be nice to see amps in realtime as throttle was punched, as well as just cruising.
Great build footage, your build with DJI 03 system is pretty clean and neat'o build, good job! 👍🏼👏🏼👏🏼👏🏼 And when you started to flying, I can see so much shakiness and oscillating so much, do you have rocksteady turned on, or is this like raw flight footage to show us without any fine tuned on your build before you do that?
Thanks! Unfortunately it was quite windy and this drone needs to be tuned. Whenever the OSD is present - it's raw footage from the goggles. Otherwise it's Rocksteady stabilized O3 footage.
very nice build my friend ..❤❤ the best editing and relxing music videos in youtube😊.. maybe you can tell me which exclty motor you used and what is diffrance in the link that you share of motoros?
You set the gold standard for frame review. Thanks for making my choice easier.
Thank you, I appreciate it!
Nice build and great flying. Mounting plate for FC is a bit interesting. Overall design looks great.
See max current was 84 amps. Definitely give it a workout. When OSD in view, was thinking it might be nice to see amps in realtime as throttle was punched, as well as just cruising.
Thanks man! I usually include this information but I don't think that the current meter was properly calibrated.
Beautiful build, Gal! Fantastic looking quad! 😃
Great flying as always!!!
Stay safe there with your family! 🖖😊
Thanks Mario, take care!
Frame looks like a smooth flyer
😁
Got a quik question:
Which cables need to go from the DJI O3 to which part of the F405 when I fly with the DJI controller?
Thanks to all answers🙌👍👍
looks clean af
🙏
Hi great build 🤝 does o3 air unit perfoms well with inbuilt 9v supply? Do we require external bec?
Thanks! Yes, no need for an external BEC.
Oh . You yaw to cancel forward motion but so the camera stayslooking forward to see .
What?
Did you find the XT power connection putting lots of downward tension down on the stack?
Yes, you need to use flexible battery leads.
Nice 👍🏻
🤘
where did you mount the receiver? I have been trying to find if there is a place for it in the manual and can't see one.
Nothing special: ua-cam.com/video/4Z0s1vKpzlE/v-deo.htmlsi=-lfmimg6SBcdlcxp&t=131
does it go wel with the air unit?
Great build footage, your build with DJI 03 system is pretty clean and neat'o build, good job! 👍🏼👏🏼👏🏼👏🏼 And when you started to flying, I can see so much shakiness and oscillating so much, do you have rocksteady turned on, or is this like raw flight footage to show us without any fine tuned on your build before you do that?
Thanks!
Unfortunately it was quite windy and this drone needs to be tuned. Whenever the OSD is present - it's raw footage from the goggles. Otherwise it's Rocksteady stabilized O3 footage.
@@KremerFPV alright just making sure, awesome footage
How did u fit that gps? Specs say its 20x22x6 mm and the goku is 25mm
very nice build my friend ..❤❤
the best editing and relxing music videos in youtube😊..
maybe you can tell me which exclty motor you used and what is diffrance in the link that you share of motoros?
Thank you, I appreciate it! I've used the RCINPOWER GTS V4 Motors - link in the video description.
Hi Gal, there is this good frame FlyFish RC Volador 2 FPV if you can compare with SpeedyBee Master 5 HD ?
Hi man, I've only tested the V1.
What the actually resonance dampening difference between yellow and translucent FC mounting board
I didn't check it, sorry.
What the name or the wire cover for gps cable?
It’s a GPS shielding harness.
Do you have a cli on your pids?
drive.google.com/file/d/1lzpjpQlplfucLn_Z9UZdKqbh8feY_PLy/view?usp=share_link
Damn
😎
Which ESCs do you use?
Hes most likely using the speedybee f7 v3 stack
Please check the video description :-)
First
🍻