no built engine contains dod/dfm/afm. its a system thats failing and there a class action lawsuit out on the entire system, so only GM put it in engines. basically if you can see the top of the engine without the EXAH mani on, you'll see the valley cover. Smooth valley cover = no AFM system present. Ridged / bumpy valley cover = AFM SYSTEM PRESENT, MUST PERFORM AFM DELETE BEFORE new engine parts are applied otherwise it will blow a AFM lifter, which will then slowly ruin the engine, collapsed lifter is typically followed by rocker arm shedding trunnions. these engines should be void of all shitty gm parts. basically get a pic of the valley cover and rocker arms. / lifter wells.
Long story short, lost my 260 on my 1964 Ranchero. I am looking to replace it with a 302. At this point I know I'll have to replace the transmission as well. I'm not looking to race this car just restore and drive around. Would love to hear people's opinions as I am not sure if I should try to get a 302 with AOD or a 4.8 LS.
Now you need to branch out to "What car will the 427 with a 6 speed tremec fit into?" THEN you will have a package that people will buy the heck out of it. If Ford and GM go WOKE on us, you guys are the antidote.
Looking for a 400 motor n transmission,,,that'll fit my 72 Monty carlo,,, want complete motor, ready too run all aluminum pulleys , ac ,,,, complete package
I'm sold after watching
What a wonderful company
GREAT VIDEO STEVE AND A GREAT EDUCATION!!! THANKS FOR SHARING!!!! I LEARNED ALOT!!!!
Mags-another great video. Thanks brother
GENIUS! 427 Big block and 6-speed manual for me thanks! 😎
I want it. How much??
Would that LS3 fit in my 2018 Escalade, and does it have the dynamic fuel management garbage
no built engine contains dod/dfm/afm. its a system thats failing and there a class action lawsuit out on the entire system, so only GM put it in engines. basically if you can see the top of the engine without the EXAH mani on, you'll see the valley cover. Smooth valley cover = no AFM system present. Ridged / bumpy valley cover = AFM SYSTEM PRESENT, MUST PERFORM AFM DELETE BEFORE new engine parts are applied otherwise it will blow a AFM lifter, which will then slowly ruin the engine, collapsed lifter is typically followed by rocker arm shedding trunnions. these engines should be void of all shitty gm parts. basically get a pic of the valley cover and rocker arms. / lifter wells.
@@MAD_BST i was thinking of getting one of those disabler plug ins, but i dont want my gas mileage to get worse
Well this is what you want save your money till you can get this out what ever setup you want
Do I still need to do a break in or is that done for me ? And what do u recommend for the break in , no wot till after like 500 miles ?
PERFECT FOR MY DAILY DRIVER!!!!
Can I get an AC unit installed too?
30 month warranty ????
Correct. 30 month / 50,000 mile warranty. Whichever comes first.
THANK YOU SO MUCH.
I want put a blueprint motor in my 2011 Kia Sorento
What about the LS 4 cyclender
Cost
Aluminum block?
What about 4 Wheel drive trucks ?
Man I wish they had a sequential transmission option.
How much $$
Long story short, lost my 260 on my 1964 Ranchero. I am looking to replace it with a 302. At this point I know I'll have to replace the transmission as well. I'm not looking to race this car just restore and drive around. Would love to hear people's opinions as I am not sure if I should try to get a 302 with AOD or a 4.8 LS.
Any Australian people using these units, ?
can i get engine for chevy silverado1500 year:2021 6.2L 4WD
Is more HP available? If you put a turbo on it does it void the warranty
Almost a guarantee.
They have a supercharged 427 making 800 bhp/780 lbs-ft.
Good V&V process.
Smog legal in California???
very nice program, can higher horsepower ranges available with lets say the Naturally Aspirated
427 ls combo?
Application for a 2002 Tahoe? Cost?
Just purchased a 400 with manual trans package. Excited much!! However, leadtimes 😨
How long
7/21 for my ls ⏳
I still havnt heard back yet 😂
hows the engine?
@@Gladgara12 He probably doesn't have it yet.
I need a 427/4l80e for my obs dually
Is the engine block in these LS engines aluminum or cast iron?
Our 408 is cast iron, the 376 and 427 are aluminum.
Now you need to branch out to "What car will the 427 with a 6 speed tremec fit into?" THEN you will have a package that people will buy the heck out of it. If Ford and GM go WOKE on us, you guys are the antidote.
Hello I need more information.. my friends. 🤠🤠🤠
times like this makes me wish i had money/knew how to generate money.
I need a one please for my truck
Looking for a 400 motor n transmission,,,that'll fit my 72 Monty carlo,,, want complete motor, ready too run all aluminum pulleys , ac ,,,, complete package
All y’all need is a Jeff Gordon hat, a Mountain Dew and some sunglasses and a cooler full of Bud light !!!!
Can u do a turn key pallet for this engine with cooling fule lines etc
Ls3 how much
I'm looking to put a 427 motor and transmission in my 2005 Chevrolet trailblazer can you send me some price on this
Great video
Hi! This all depends on level of dress. Please reach out to our team at 308-236-1010 or info@blueprintengines.com for pricing!
DROP AN LS INTO ANYTHING!!!!
God bless you my friend'👍👍👍
If only I could afford one
50,000 mile warranty ???? Did I hear that correctly ?????
Yes
Dude with the glasses can sell ice to an escemo lol great speaker
Can this engine use for dialy sir?
Yes, all BluePrint Engines are very streetable, and run on pump gas. Very daily driver friendly.
@@johnnymac3079 ok, thks for the answer.. i will check the site soon 🙂
What does this set up go for $$,$$$.$$
Midlife crisis money.
@@banksta3 Lmaooo
How much? I just want the bottom line. How much will it cost me? Total. 😂😂😂😂😂
And with an air conditioner package? 😳
Dude if u cant mount a trans to an engine u shouldn't be installing one in the first place!
If only I could afford this :( lmao
for real bro
That motor looks sexy! :-)
20 grand 😮
Really?
Holy SneeshKa
I’m ready to make my investment
Eskimo