I don't like Soothe nearly as much as most people seem to. I feel like it often takes all the character out of a sound, even at low volumes. It ends up sounding "cleaner," but also flat and lifeless. I like that this plugin has a High Frequency Compensation knob. I often end up boosting some highs after Soothe to get some of the character back.
You can hear it clearly on a phone. However, this can be easily dealt with using a normal EQ. You can even make separate bands for the octaves just like in IMF
There’s a lot of other aspects of the plugin to be desired; there’s obviously EQ and low/hi filters, but also stereo/mono width adjustment (this one sounds amazing on widening a bus), dynamic eq, saturation and tonal characteristics such as tape, tubes, or an original Korneff circuit, etc etc etc. It’s a bunch of very high quality tools in one plugin that can be used on a lot more than just guitars. Fluff is just demonstrating one aspect of the plugin
That's neat. Couldn't you have changed the freq spectrum on soothe to help narrow it down? I hear some nasty freq's in the bass track too that was definitely adding to the guitar freq's. Thanks for the demo Fluff, always entertaining.
The nasty whistling I heard wasn't affected when you toggled the effect on and off. However it *did* go away when you soloed the rhythm guitars again for a split second around 8:20, leading me to believe the offensive frequencies were the high end of the bass guitar.
Honestly you can do this with an EQ, which I like to do, then use soothe for helping to just keep things clean afterwards. You can really dial in soothe to just use it on problem areas, especially if you figure out where exactly those areas are with an EQ first. I like to get soothe dialed in, typically way more narrow than you had it here, then turn up the depth until the unwanted noise is gone, but without it changing my tone. Also that bass top end needs some love, in the mix it was the most harsh and whistling thing I could hear.
"The problem with Soothe2 is... you lose energy... when you do things that are... " Incorrect? It's pretty trivial to set Soothe2 so this doesn't happen. It's a great tool when used properly, why dismiss it? I'll be honest tho, this harmonic on the guitars is so miniscule, what bothers me more is the ringing in the upper register of the bass guitar in this mix.
Personally, I feel like it always makes my sound flat and lifeless regardless of how mild I set it. I still use it from time to time, but I don't get why people are so in love with it. I think it's just part of the modern obsession with "perfection." It's okay to have some resonances, spikes, etc. That's often what gives a sound its character.
@@rome8180 You're likely making mistakes with the settings then. It can kill only a narrow band of resonances easily, and do it in a smart, program-dependent way.
Couldn't we just use the built in EQ in Logic to achieve the same result? Nothing against the plugin, it's great, but the tools Logic comes with could achieve the same results when used correctly. The final result and the playing sound great though.
Рік тому
I thought everyone is doing this already with Fabfilter Q3...
Lol I always find out and/or learn about (which is the creepy part) the exact plug-in(s) I'm needing (lol or not knowing I even needed or wanted something til I see it here) without having to search for it!
Yet some of your fav top records are boosting those frequencies on guitars. Ie foo fighters, Andy Wallace, Ben Gosse. 3.2k on a 1073 is pretty epic imo. Soon as you start pulling things out like that it sounds unnatural, and ultimately you should adjust the presence on your amp instead.
Any advice for getting rid of that weed smell on Nitro finishes??? Every time I pick up one of my vintage guitars my hands catch the smell of weed😂 One of them is a 335 Semi Hollow...
oh damn that's awesome! It's essentially what i end up doing with an API 560 Graphic EQ. this is a bit easier to use. I like soothe 2 more on clean guitars as it pokes out through a lot more. i find with distorted guitars a LOT is lost from the tone and sound so i don't use it often. I will often boost the 3-5k range with a Neve EQ to boost attack and notch out exactly around 4k with an api/notch to get rid of nasty resonances. It's a bit janky, but it sounds great in the end. that being said sometimes it's just easier to mic things myself as when i do that i can better get a tone i like. amp sims never quite 100% get what i want and i rarely get recordings to mix that are like that.
You said, "leave room for vocals" and I think instantly realized part of why my vocals sound awful over distorted guitars. Add it to the never-ending list of plug ins.
Instead of the Soothe, I got the TB Audio DSEQ3 which people say is a much more versatile (and cheaper) option. Soothe definitely has the easy UI but also the higher price tag.
Wow, the term "you can't unhear it" is so accurate. Crazy how our ears work. If you hadn't shown it before, I wouldn't have been able to hear it or put my finger on it quite as well. So crazy!
I try to tame harshness with some notches or small cuts in the 2-5K area before I use soothe with the Nolly “Guitar De-Spike” preset and usually have the depth knob turned down compared to what it is on the preset. It prevents the guitars from being too neutered while getting rid of some extra harshness that I’d struggle to get with static notching alone.
Should've put this one on the bass guitar, too. It's whistling like a freight train. 🚅
I don't like Soothe nearly as much as most people seem to. I feel like it often takes all the character out of a sound, even at low volumes. It ends up sounding "cleaner," but also flat and lifeless.
I like that this plugin has a High Frequency Compensation knob. I often end up boosting some highs after Soothe to get some of the character back.
You can hear it clearly on a phone. However, this can be easily dealt with using a normal EQ. You can even make separate bands for the octaves just like in IMF
There’s a lot of other aspects of the plugin to be desired; there’s obviously EQ and low/hi filters, but also stereo/mono width adjustment (this one sounds amazing on widening a bus), dynamic eq, saturation and tonal characteristics such as tape, tubes, or an original Korneff circuit, etc etc etc. It’s a bunch of very high quality tools in one plugin that can be used on a lot more than just guitars. Fluff is just demonstrating one aspect of the plugin
I guess in that parcticular section together with drum and bass - the distorted bass makes much more interference and nastiness here :-)
Thought this was like how to actually clean a guitar like wipe it down
lolololol
Same lol
I want to make a plugin called Seethe that does the opposite of Soothe, usefully.
That's neat. Couldn't you have changed the freq spectrum on soothe to help narrow it down? I hear some nasty freq's in the bass track too that was definitely adding to the guitar freq's. Thanks for the demo Fluff, always entertaining.
The nasty whistling I heard wasn't affected when you toggled the effect on and off. However it *did* go away when you soloed the rhythm guitars again for a split second around 8:20, leading me to believe the offensive frequencies were the high end of the bass guitar.
The 2k whistle on the bass is more overpowering than whatever is on the guitars
Become the knight made me aware of this plugin.
Good stuff
Looks like a cool plugin but I think you could just do this with eq instead.
Honestly you can do this with an EQ, which I like to do, then use soothe for helping to just keep things clean afterwards. You can really dial in soothe to just use it on problem areas, especially if you figure out where exactly those areas are with an EQ first. I like to get soothe dialed in, typically way more narrow than you had it here, then turn up the depth until the unwanted noise is gone, but without it changing my tone.
Also that bass top end needs some love, in the mix it was the most harsh and whistling thing I could hear.
"The problem with Soothe2 is... you lose energy... when you do things that are... " Incorrect? It's pretty trivial to set Soothe2 so this doesn't happen. It's a great tool when used properly, why dismiss it? I'll be honest tho, this harmonic on the guitars is so miniscule, what bothers me more is the ringing in the upper register of the bass guitar in this mix.
I didn’t say it’s a great tool.
@@RiffsAndBeards...what?
@@burneraccounthandle I think he means "I didn't say it isn't."
Personally, I feel like it always makes my sound flat and lifeless regardless of how mild I set it. I still use it from time to time, but I don't get why people are so in love with it.
I think it's just part of the modern obsession with "perfection." It's okay to have some resonances, spikes, etc. That's often what gives a sound its character.
@@rome8180 You're likely making mistakes with the settings then. It can kill only a narrow band of resonances easily, and do it in a smart, program-dependent way.
Couldn't we just use the built in EQ in Logic to achieve the same result? Nothing against the plugin, it's great, but the tools Logic comes with could achieve the same results when used correctly. The final result and the playing sound great though.
I thought everyone is doing this already with Fabfilter Q3...
What monitors are you running? I couldn't hear a difference lol. Maybe just a slight difference.
What was strange to me Soothe didn't remove this problem area.This was still there.
Lol I always find out and/or learn about (which is the creepy part) the exact plug-in(s) I'm needing (lol or not knowing I even needed or wanted something til I see it here) without having to search for it!
I can't hear fuck all difference. Definitely not related to being front row at the Thrice show last night.
Am I the only idiot who came to this video expecting to learn how to clean an instrument? lmao
Yet some of your fav top records are boosting those frequencies on guitars. Ie foo fighters, Andy Wallace, Ben Gosse. 3.2k on a 1073 is pretty epic imo. Soon as you start pulling things out like that it sounds unnatural, and ultimately you should adjust the presence on your amp instead.
I’m talking about stray pokey frequencies not a shelf EQ on a Neve tho
Funny enough I hear a similar terrible frequency in your bass guitar now lol!
This has been my secret weapon, it’s an incredible tool and WAY underrated. More people need to be talking about!
Could you make a video about the *TBProAudio DSEQ* and see how it stacks up against this?
"Please use headphones" Puts on his OLLO's and then proceeds to get ears blown to shit with a horrible 16db sweep with no warning! Nice one!
You're welcome
Love the LANDMVRKS shirt!!! One of the best bands out there!
no squealies, no KSE
Nice one
I listened to this on my cheap android while taking a dump and I could clearly hear it. That's when you know your mixing is effective.
Any advice for getting rid of that weed smell on Nitro finishes??? Every time I pick up one of my vintage guitars my hands catch the smell of weed😂 One of them is a 335 Semi Hollow...
Cool!
oh damn that's awesome! It's essentially what i end up doing with an API 560 Graphic EQ. this is a bit easier to use. I like soothe 2 more on clean guitars as it pokes out through a lot more. i find with distorted guitars a LOT is lost from the tone and sound so i don't use it often. I will often boost the 3-5k range with a Neve EQ to boost attack and notch out exactly around 4k with an api/notch to get rid of nasty resonances. It's a bit janky, but it sounds great in the end. that being said sometimes it's just easier to mic things myself as when i do that i can better get a tone i like. amp sims never quite 100% get what i want and i rarely get recordings to mix that are like that.
You said, "leave room for vocals" and I think instantly realized part of why my vocals sound awful over distorted guitars. Add it to the never-ending list of plug ins.
Instead of the Soothe, I got the TB Audio DSEQ3 which people say is a much more versatile (and cheaper) option. Soothe definitely has the easy UI but also the higher price tag.
Wow, the term "you can't unhear it" is so accurate. Crazy how our ears work. If you hadn't shown it before, I wouldn't have been able to hear it or put my finger on it quite as well. So crazy!
Noice
I try to tame harshness with some notches or small cuts in the 2-5K area before I use soothe with the Nolly “Guitar De-Spike” preset and usually have the depth knob turned down compared to what it is on the preset. It prevents the guitars from being too neutered while getting rid of some extra harshness that I’d struggle to get with static notching alone.
I clicked on this video thinking it was how he actually cleans his guitars lmao
Addicted to Soothe tho but interesting solution here 🤘
my favorite plugin
Dear Lord That RIFF!!!!!!!!!
lol, i thought the video was to going to be about literally guitar cleaning.
I used the stock chorus plugin on reaper just set it to minimum speed and depth
awesome
when the listen is enabled i can hear it, but as soon as it's disabled..... idk my ears are damaged.....
I thought this was a video to actually clean your guitar lol
thanks for video Fluff!
@RiffsAndBeards can Brainworx bx_refinement do same things ?