Well Mr Electricity, you did a top-notch job, whereas we live in a world of throw it away and replacing, you were able to bring new life back into a bin it society. Well done 👍
for what he has to work with, and limited resources this Guy is a true craftsman. a survivor by doing..nobody should be critical of him or His work..because i suspect He can out work most of us..and do it better...
iamrichrocker I could maybe outwork him I’m 16 and very competitive I’ve mastered a lot of craftsmanship been working on machines since I was 5 I am still do the craft work and I love it a lot haha
I can barely build a guitar from a pre-made Kit. This guy ROCKS! The thing is...he now owns and can enjoy a piece of work that 1. Nobody else has. 2. He saved/rebuilt/improved himself. That’s really cool in my opinion.
No se de que pais sea este señor, pero el hace su trabajo muy bien, aqui en mi pais (argentina) tambien hacemos lo mismo, entiendo que algunas personas se asombren con esta reparacion y digan que ellos compran nuevo, pasa señores que en su pais regalan las cosas, a nosotros nos sale muy caros, demasiado diria yo asi que no nos queda otra cosa que reparar.
A little trick that I picked up. Instead of repainting the whole thing the marks where the paint has chiped off or scratched off just touch up with boot polish. You can match it pretty well as well. Just wipe it on then wipe of let dry then repeat a few times and it will be around 80-90% covered.
Must say I am mightly impressed by this guys work , and craftmenship , the ability to rewire transformers is a great asset , my hat goes off to you sir !
the diffuser needs to be centered, the dome needs to be peeled off and an old film film installed between the magnetic pipe. After the glue has dried, remove and glue the dome back.
Да, я с вами согласен. Но после того как они поменяли нормальное но не исправное ВЧ звено на пьезо пищалку, я понел что они делают на отъеби... И даже смотреть нет смысла. И они ни когда не поймут что такое герметизация корпуса. Так как в видео я этого даже и не увидел. С уважением, Никита.
When I worked in the Hi Fi trade from the 1970s to 1980s a company called Jamo or Jano not sure of the exact name. The rep came to my shop and the speaker makers philosophy if they had one was big box lots of drive units. This matched the desires of the people who brought them. They used to come back and complain a few weeks latter when they found there Mates "Boxes" were better. The mate had probably brought decent drive units and made decent cabinets. These sound like Jamo Boxes ! There them alway :-) They might corrupt your concept of good sound.
What did you brush on foam seround to remove them. Just wondering. I watched lot of you restorations and all ways wondered what it was. Oh and thanks to you I've restored 3 pairs of speakers now. Believe it or not you inspired me to restore my first set a pair of pioneer CS-539 then CS-549. and a pair of pioneer S-H552F-K 4way speakers
You put a lot of work into these but I'm not sure if it would have been better to invest that time and money on a new pair of speakers that may have a better sound. It must have been a fun project !
Correct me if I'm wrong but you didn't have to fix the subwoofers on the side maybe clean them up but definitely not a foam replacement I mean they look perfect cause I'm guessing they had rubber surround which should have been fine
Hello sir you did a good job !!I did this also a couple years ago. Where a found some by the driftstore The trick is to find the right diameters. For the speakers To glue, you have special speaker glue .And you glued on with a brush To clamp the foam roundings to the base and the speaker . Use a 220v wire cable Lay it around the glued speaker and than put on clothespin to set.. the hard part is to center the foam rings ..They need to perfect in the middle, so the coil inside the magnet go s straight up and down in one movement My speakers are still playing by a friend
Sorry Mr.E, your soldering is pretty poor and the wires going to the woofers and mid-range speakers seem a bit too thin... Otherwise a good rebuild... 8/10
You are a very good craftsman but I really wouldn't have bothered polishing these turds. They were just god awful 'white van' speakers to start with. Best thing you could have done was fire 240V through them and filmed the resulting explosion at 1000fps.
Wow 👍 Nyimak sampai selesai videonya
Bác này ở Việt Nam mà giỏi ghê. Làm clip tiêu đề tiếng anh. Tiền quảng cáo bên nước ngoài cao hơn. Bác thật thông minh
Đặng Beta chuẩn ạ, bác này làm vid kém gì bọn tây về khoản phục chế đồ đâu! Ít ae VN biết quá
Ko hiểu sao em thấy rất thích những video kiểu này e rất thích điện tử luôn
Mong muốn được giao lưu học hỏi cùng các bác Zalo 0394243845
Ít ng việt quá các bác nhỉ. Toàn thấy ng nc ngoài bình luận
Tôi xem suốt mà nay mới thấy vn bình luận
Good my friend thank you for video
Well Mr Electricity, you did a top-notch job, whereas we live in a world of throw it away and replacing, you were able to bring new life back into a bin it society. Well done 👍
You dont see this very often anymore.. everyone just trash them if the membrane is broken, but you save them and i love it!
Len Gaming every speaker will repaired in the Professional Sektion
for what he has to work with, and limited resources this Guy is a true craftsman. a survivor by doing..nobody should be critical of him or His work..because i suspect He can out work most of us..and do it better...
iamrichrocker I could maybe outwork him I’m 16 and very competitive I’ve mastered a lot of craftsmanship been working on machines since I was 5 I am still do the craft work and I love it a lot haha
I can barely build a guitar from a pre-made Kit. This guy ROCKS! The thing is...he now owns and can enjoy a piece of work that 1. Nobody else has. 2. He saved/rebuilt/improved himself. That’s really cool in my opinion.
Làm khéo quá đi bác
Судя по магнитной системе, колонки полный фарш.
First Class Job. Everything should be fixed ,recycled ,repurposed.
Không ngờ việt nam mình cũng có kênh phục chế đồ như thế này ^^
Ang galing po niya. Magpawa rin sana ako ...
No se de que pais sea este señor, pero el hace su trabajo muy bien, aqui en mi pais (argentina) tambien hacemos lo mismo, entiendo que algunas personas se asombren con esta reparacion y digan que ellos compran nuevo, pasa señores que en su pais regalan las cosas, a nosotros nos sale muy caros, demasiado diria yo asi que no nos queda otra cosa que reparar.
Привет из России! Хорошая работа! Я тоже люблю ремонтировать.
Me.Electricsity very good restoration 👍👍👍👍👍
A little trick that I picked up. Instead of repainting the whole thing the marks where the paint has chiped off or scratched off just touch up with boot polish. You can match it pretty well as well. Just wipe it on then wipe of let dry then repeat a few times and it will be around 80-90% covered.
Must say I am mightly impressed by this guys work , and craftmenship , the ability to rewire transformers is a great asset , my hat goes off to you sir !
Total Harmonic Distortion - 100%.
Your stinky ass , harmonic distortion 1000%
These actually sound really nice....
@DutchGamers these sound awful wdym
He replace a HiFi tweeter whith a piezoelectric tweeter bad idea
@@dumitracheionut7285 Read my thoughts.
I had no idea that those membranes can actually be replaced. Very nice!
you are a multi talented man or should I say hero
صح كلامك كل شي يعملوو
Thank you for not adding irritating background music.
молодцы,хоть без музыки. все четко ясно..
Great job Mr. E, you are indeed multi talented.
조아요 구독 꾸욱누름니다 감사합니다 또만나요 수고하세요
amazing job on the speaker restoration they look great
the diffuser needs to be centered, the dome needs to be peeled off and an old film film installed between the magnetic pipe. After the glue has dried, remove and glue the dome back.
I'm impressed. Both by the speakers themselves, and the fixin' skilzz.
после этой поклейки, динамики прослужат, максимум пол года! центровать надо, перед поклейкой.
так у них по ходу гарантия: за дверь и всё.
Да, я с вами согласен. Но после того как они поменяли нормальное но не исправное ВЧ звено на пьезо пищалку, я понел что они делают на отъеби... И даже смотреть нет смысла. И они ни когда не поймут что такое герметизация корпуса. Так как в видео я этого даже и не увидел. С уважением, Никита.
Maravilhoso 😍 ficou muito lindo. PT-BR
Respect to you Mr Electricity. You are a real Craftman, and you will deserve much more suscribers, and also money :)
Việt Nam the best!!!
That is a great sounding restore.
Keep up the good work.
This man is unbilievable ! Great Work
Very good job and Restauración look and sound perfect thanks for the video men
Que som maravilhoso 😍😍🎶🎶🎧🎙👏👏👏👏👏👏👏👏
I love it despite what those below couch geniuses are blabbing 😂😂😂😂😂
Another great video..
Nice worck Man Everything
This guy is mint boys. 👍
When I worked in the Hi Fi trade from the 1970s to 1980s a company called Jamo or Jano not sure of the exact name.
The rep came to my shop and the speaker makers philosophy if they had one was big box lots of drive units. This matched the desires of the people who brought them.
They used to come back and complain a few weeks latter when they found there Mates "Boxes" were better.
The mate had probably brought decent drive units and made decent cabinets.
These sound like Jamo Boxes ! There them alway :-) They might corrupt your concept of good sound.
You are fast with that screwdriver!
lol
Đồng hồ SK chắc là Việt Nam
What did you brush on foam seround to remove them. Just wondering. I watched lot of you restorations and all ways wondered what it was. Oh and thanks to you I've restored 3 pairs of speakers now. Believe it or not you inspired me to restore my first set a pair of pioneer CS-539 then CS-549. and a pair of pioneer S-H552F-K 4way speakers
только для гаража пойдет такие колонки
good work keep up good work
Bravo!
Very nice job !
Very good
You put a lot of work into these but I'm not sure if it would have been better to invest that time and money on a new pair of speakers that may have a better sound. It must have been a fun project !
Nice worck Man
Excellent.
Talento!
Ciekawe jak długo tak zregenerowane głośniki wytrzymają. Coś czuję że cewka długo nie wytrzyma.
good job
Top parabéns pelo trabalho
Correct me if I'm wrong but you didn't have to fix the subwoofers on the side maybe clean them up but definitely not a foam replacement I mean they look perfect cause I'm guessing they had rubber surround which should have been fine
absolutely amazing guy
looks professional!
Крутяк молодец руки работают
Hat
шикарно лайк !!
Это где так использовали эти акустические системы,что бы довести до такого состояния?
Hello sir you did a good job !!I did this also a couple years ago. Where a found some by the driftstore
The trick is to find the right diameters. For the speakers
To glue, you have special speaker glue .And you glued on with a brush
To clamp the foam roundings to the base and the speaker . Use a 220v wire cable Lay it around the glued speaker and than put on clothespin to set.. the hard part is to center the foam rings ..They need to perfect in the middle, so the coil inside the magnet go s straight up and down in one movement
My speakers are still playing by a friend
ух ты класс звук утебя получился
Good job
I suspect these are White Van speakers judging from the stupid number of drivers and configuration
I think they are Rockville speakers
@@alivenizif I think so too
PA5cAl1 is right
Defiantly got to be white van.
They look like B&O or Wharfedale Speakers but the name on the back of the box says Ahudor. Good speaker cables,
молодец высший класс
good bro
Should be more of these videos and less of the speaker destruction videos. lol
Hay engineer you are anjod plz rivover it and wow amazing content😍😍😍😍😍
wonderful
Why did you refoam those crappy plast subs on the side they still looked alright
Carai,caixa de som top
Nyc
Hace de todo el uña sucia..
Sounds good
Felicitari ! Nice rebuild.
Good Job
nice
Each time I'm hearing the radioactive sound
👍👍👌👌
He is wearing the watch he restored😄
良く直したね、と言いたいがあまりに雑なのでびっくりしました。
what kind of solvent and glue do you use?
Where did can find the black round rubber ?
Parts express
Can get cone or the rubber surround as a kit or individually for most size woofers,subs,mids etc...
Su sebili bekliyoruz...
TOP
woww
אלוף
Naic
Back to the Future speakers?!
Muito bom
конечно результат хрен его знает но такую музыку включать на хороших колонках ну бред же
Sorry Mr.E, your soldering is pretty poor and the wires going to the woofers and mid-range speakers seem a bit too thin... Otherwise a good rebuild... 8/10
Hahaha, nice!!!
You are a very good craftsman but I really wouldn't have bothered polishing these turds. They were just god awful 'white van' speakers to start with. Best thing you could have done was fire 240V through them and filmed the resulting explosion at 1000fps.
A cho e hỏi đẩy kia tìm kiếm tên như nào v ạ
Where did you get your soldering gun? Thanks
👏👏👏👏👏
I want to buy this system!
what is the solvent you used to dissolve the membrane glue?
Use Aceton. Is work always.