I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed
Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...
now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)
don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)
I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."
There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.
Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.
@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.
@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer. Printing something actually useful?✋🏻 Printing something that I probably shouldn't be printing? 👉🏻
Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.
Good enough is GOOD ENOUGH!!! Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?
Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.
She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.
The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!
Whelp, after this project, looks like you'd better invest in a filament grinder and turn it all into re-useable filament. Environmentalist rage averted!
I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack. Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!
I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor. I'm so glad I found you on the Maker Secret Santa. Have a happy new year!
Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.
another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare
I bought a Creality Ender 3 v2 SE yesterday but it just won't read the SD card. I've already formatted it and updated it to the latest version but it can't read what's on the card. Can you help me? You're my only one Hope Edit i Fixt it i put the sd card up seid down in
How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol
Well I mean of cours it works!?!?.... I mean anything could be built or constructed into a toilet.. and if it held water and was plumed correctly it would work ..
Im a girl and I been 3d printing for 4 year, but one thing that bother me in all that time. Where are all the girl 3d printer on UA-cam, all i see is guys guys guys WTF. Thank you for being so awesome love you
I haven’t checked on you channel in almost a year so I’m now watching all videos from newest to oldest and every time I see a video title I die laughing, good job
Please print a reclining toilet with foot rest. i don't think anyone in the history of the world has ever dropped the kids at the pool in the reclining position.
For an actual toilet race, Check out the "dunny derby" in Winton Aus, as well as the toilet speedsters Colin Furze, Edd China, Paul Sender and Jolene Van Vugt
At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.
I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed
Please pin this comment.
@Emilytheengineer why do you think Frank has over a million subs but can not get this many views?
@@johneckerbecause subs stopped meaning anything 3-4 years ago. With the customized home feed it matters who you watch not who you are subscribed to.
Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...
in general bowls have a wide lip, try sit on any toilet with the seat up, the width tends to be so you can clean them more easily@@Deja117
now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)
Gridfinity compatible OpenToilet when?
I can't wait to mod my 3d printed toilet
don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)
inb4 this "open toilet" is blown out proportions and people are walking around in 20 ton toilet mechas made out of PLA
@@LKLM138Everything devolves into skibidi toilet eventually
I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."
There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.
And physical health!
this is so accurate, and somehow also represents my life with my wife.
and sanity
Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.
This is a magnificent idea!
Yes!
Crab walking crap chair
The toilet from better call saul
If my daughter 3D printed a working toilet with all of those features, I'd sincerely be beaming with pride despite my wife's review of this video.
Your wife seems very critical, looking at the comments you’ve made on this channel lol
@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.
@@jonathandill3557 She's probably a nice person nonetheless!
@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer.
Printing something actually useful?✋🏻
Printing something that I probably shouldn't be printing? 👉🏻
The toilet's comedic timing for the "last flush" @ 12:07 is perfect.
You’re right. Got me good!!
This is like if William Osman and Michael Reeves had a daughter, the chaotic energy is hilarious and I love it. Definitely subscribing.
William Osman did have a daughter.
He calls her potato.
He meant a daughter of both william and michael reeves@@YossiRafelson
@@YossiRafelson So you're saying Emily's channel is a viewport into the future because Emily is Potato?
They were roommates, they couldave and that cept it secret
Just curious how would 2 men have a daughter…
Now that you’ve mastered printing large parts and welding them together, you should make a life size 3DBenchy and boat around in it.
This is gold.
get a motor and make a 3D printed toroidal prop. (also, for the love of God, add a bilge pump and a triple hull)
Aaaaaan She did it now :D :D
omgaa she did it
You told the future
Emily: "You deserve one, last, good flush"
Toilet: "How about no"
Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.
that's it's whole own 24/7 hobby.
if you have uses for plastic block or plate things its far easier to melt and cast/form that way
0:09 While everyone is talking about the toilet gag, I want to know, WHY HAVEN'T YOU PAINTED THAT ROOM PROPERLY????
This was a gag?
nO TIME FOR THAT NO MORE NEVERM
My thought exactly
and nevermore@@draxgoodall3685
Good enough is GOOD ENOUGH!!!
Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?
So now you make a grinder & filament maker & recycle the whole thing. And all those other things. It'll be a hoot.
Shush you horrible person, they are a great creator.
boring
This video taught me how a toilet works.
same
For the most part. It's not completely accurate.
if you could print a clear one you could better see how it works
Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.
Truly the cursed content I am here for.
It feels like Emily is reviving a phase of kids playing with “pooping” dolls
I like to imagine the inventor of the flushable toilet getting equally exited at the first successful flush.
The line between genius and madness is very thin, Emily came, murdered the line, chopped it to pieces and used it to feed 3D printers...
I am *so* there for more of whatever this is.
Somebody put that toilet in an art museum
Kind of really like the weird 70s ArtDeco thing you got going on. It's like if Mondrian made a toilet.
Emily’s war on the Environmentalists continues😂- This was absolute beautiful chaos and I’m here for it!
She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.
emily needs to do a collab with greta thunberg
The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!
you could totally turn this into a flower bed, I mean its a rainbow of colours it would fit right in a garden it even has that art gallery vibe to it
PLA toilets are little hobby of mine, I also love chaos and abstraction, this video checkss more marks than i thought its possible
So many pieces for something that large. You could really use a bigger printer. Maybe a 10' tall one?
I think Emily should lose her 3-D printing pass for a week😂
Ive discovered those garbage 3d pens are actually awesome 3d welders. Their tips melt the seam you trace and they fill it with filament
i think itd be a nice ride with 2 rear hub motors and 1 front fork for steering. so close to a street legal mobility toilet
As an engineer; I am screaming in my head. What a f-ing chaos 😂 no thoughts, just dos.
How can you see this title and NOT click ?
Honestly I agree like the title of this video is just too good to not click
DAN AS THE EPA LOL
This is the best video I've watched in a while 😂. Please keep on doing whatever this is, Emily.
The Wheel breaking off the second time right before you wanted to pour the water in is such comedic timing, this Toilet is a paid actor
Whelp, after this project, looks like you'd better invest in a filament grinder and turn it all into re-useable filament.
Environmentalist rage averted!
I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack.
Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!
I am really surprised that nobody tried putting a candy bar inside to see if it would flush.
Emily's just insane enough to be amazing
Never until I found this channel a few days ago had I seen someone with such relatable levels of ADHD. I approve.
It's not wasteful if it's full of waste
that thing looks incredible
"Curse you tiny toilet"---vector from the minions suggestion u should have used Nutella for poop for the mini toilet ,just sayin,. 😎👍0 0:36
I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor.
I'm so glad I found you on the Maker Secret Santa. Have a happy new year!
Thats where I found her too
Not recycling that PLA. The world needs an inflatable toilet.
Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.
There are several world firsts in this video, including using a hover board while using a toilet.
I did a thing but a girl
correct
wtf
This might be the first time in history that a member of homo sapiens has decided to 3D print a full sized fully functional toilet.
another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare
And then set them in the sun for the UV resin to cure ?
Would it work under winter sun though ?
👍👍 absolutely wild 😆👌!
Our future Martian neighbours will be printing these beauties out and probably naming their kids after you 👍😄
She supports william osman because she has the cat warehouse socks 😂
Design a toilet that combines a garbage disposer to create the never clog toilet.
I can get you a discount on disposers.
You forgot to add the Jets in the Rim that create the swirl
This is amazingly funny. How about you make a huge 3D printer and print an igloo, next?
Next video: „I 3d printed a huge Hottub“
I bought a Creality Ender 3 v2 SE yesterday but it just won't read the SD card. I've already formatted it and updated it to the latest version but it can't read what's on the card. Can you help me? You're my only one Hope
Edit i Fixt it i put the sd card up seid down in
This might be unrelated, but I'm still deminonbinary. Seriously!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol
Well I mean of cours it works!?!?.... I mean anything could be built or constructed into a toilet.. and if it held water and was plumed correctly it would work ..
Im a girl and I been 3d printing for 4 year, but one thing that bother me in all that time. Where are all the girl 3d printer on UA-cam, all i see is guys guys guys WTF. Thank you for being so awesome love you
I haven’t checked on you channel in almost a year so I’m now watching all videos from newest to oldest and every time I see a video title I die laughing, good job
So uh... Thumbs up if you watched this on the toilet (and also wished you had a phone holder).
with the leftovers of the toilet you might need to do an episode on making your own filament recycler. lol
Question: If this thing is on wheels, how does the plumbing get hooked up (and stay hooked up) while it is moving around
Seeing the toilet with the wheels at the end made me wonder; Could you print a wheelchair? :D
Now this project validated you making a video on recycling ruined prints 😂 enter that den of frustrations
First time viewer, and this was the most ridiculous thing I've seen in a while !!!
Love it!
*subscribed*
This probably would have benefited from more study on how a toilet functions.
What a waste of plastic
4+ wheels would be more stable. Waiting for the toilet reborn episode in 2024...
Welp, we know for sure you're not "Emily the Environmentalist. "
You should never flush your rubber gloves down the toilet.
Don't forget the seatbelt, need a seatbelt.
Please print a reclining toilet with foot rest. i don't think anyone in the history of the world has ever dropped the kids at the pool in the reclining position.
some person with way to much money would have paid alot of money for this in some fancy art gallery .
This would make a cool flower pot.
Ok here me out Toilet racing. Also why is this one of the most glorious things I have ever seen 🤩
For an actual toilet race, Check out the "dunny derby" in Winton Aus, as well as the toilet speedsters Colin Furze, Edd China, Paul Sender and Jolene Van Vugt
Me watching a lady 3d print a toilet while I sit on...
Is the Internet always watching 🤔?
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣Never thought this would happen
Where are the rgb led lights and. Subwoofers speakers
I'm so confused why this toilet doesn't have a toilet seat
If anybody ever needs to know what 'scope creep' means, this video has that covered.
Sorry to tell ya, this was probably just a quarter life crisis.....
Somehow the midlife crisis came after "i wanna 3d print a toilet"
At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.
This channel is like the alternate timeline where william osmans house didnt burn down & he still builds stuff
Can't you reuse most of the plastic from the toilet for future 3D prints?
The Industrial Revolution and its consequences
You should add a motors, the wheels make it movable
Since it works with a hose, you should put the toilet in your garden.
Your bidet was going #1 and it had a lot to drink at Christmas brunch
All of this thought and design of the toilet and not once did she think of adding a toilet seat😅😅
It is time to commit.
It is time for a 1m³ 3D printer.
It is time for the *big boi*
When did William Osman become an Emily‽
3d printed toliet costs $500 in pla, real toliet, $200.
The amount of direct and indirect waste (no pun intended) with 3dp is astonishing.
It was in pain, so it killed itself at the end
RIP Toilet
You were a real one
YoU wOuLdN't DoWnLoAd A tOiLeT
In the future, you really need to use a filament that is way less porous.
You have to keep it on the side of the X1C at all times so it can always have poop to flush