Man I am so glad that I found this! The way that you make these videos Aprilia should pay you for training their new owners! I have a brand new 2021 Tuono. I asked the dealer to set my shift light at about 7,000 for the break-in but now I am past it. I cannot figure out how to reset it myself to maybe 10,000? Could you please let me know how to do that if you know? I can't find it in a book.
Thank you for making this video. I was searching everywhere for the how to on this bike. Will you make a video showing how to use the few other functions not covered like pit lane speed limiter, launch control, cruise control and all the buttons? Also, how do you reset the Trip A odometer with out resetting the other recorded functions like max mph and average mpg and such? Thanks again
Thx for the Videos. Help me a lot. How can I Set my Personal User code? I cant confirm that in the settings. And where did you get the nice table of settings?
Hi Jo Jo...thank for watching. You can access the user code function in the service menu. Default is 00000. The table of recommended settings is on page 129 of the user manual. Hope this helps.
Thnks for the video nice work.I have only one question, aem in 1 is the map with the most power and more agressive? because i cant tell the difference.
Brilliant learning lots the book confuses me for some reason ( like I didn’t know to hold the mode button to get into that setting screen ) question for you I have a Tuono like I said b4 when I start my bike the suspension icon comes on then goes off after a second or so ? I haven’t noticed it b4 can you see if your RSV4 does it to please 🏍🏍👍as b4 loving this series
Hey bro question. I have the exact same bike and I’m having an issue where the throttle cuts off for a second at 7000rpm on 6th gear. Is this one of the interventions?
@@brilliantspeedsuperbikes so must be having problems with the upper injectors from what I’ve read on the forums…. The upper injector are supposed to start spraying at those RPMs and when they don’t that is the result.
How did you fit the aim solo rubber stem for the mount? I have a 2021 base, and the stem I received for the RSV4 mount was to large in diameter. Ended up using an R1 stem.
Hi...not sure how much HP in each mode. But AEM Level 1 is most aggressive with full power, and Level 3 is least aggressive and recommended for rain conditions.
I have a question about riding modes. I don't know how to change APRC Level without User and Track 1 modes, or it just can be changed the Level only 2 riding modes? Please help me solve this problem Thank you!
ua-cam.com/video/cEr7qIZE95s/v-deo.html&ab_channel=BrilliantspeedSuperbikes%26Motorsports Hey I'm not sure I understand your question, but if you see the above video starting from 12:20, it takes you through the 6 maps (3 for road mode and 3 for race mode) and shows you which ones you can or cannot adjust. Then it takes you to the bike and shows you how to adjust the ones that can be adjusted.
I would like to know how to toggle between the modes and change the settings while in T1 and T2 screens (T2 shown at 2:56) mine always sitting in ATC and I can use +/- clicker, but how do I move to the other boxes such as AWC, AEB, etc? I think only the User mode allows changes but could be wrong
@@brilliantspeedsuperbikes Jeez I am not bright lol, thanks for the heads up. Was screwing with it for awhile trying to figure it out but didn't think to do that. Many thanks!
Thank you for this, I’ve got another problem like when you hold still the throttle between 3k-5k rpm, cruising around 30mph, the bike goes in bursts, like an ev car pushing intermittently, is it related to the AEM or AEB settings?
Thanks so much for this video, very clear and very detailed. No need to spend two hours to read the user's manual
Thank you, so very informative sir. Only, the music was louder than your verbal presentation. Otherwise, thank you again sir.
Great video but no need for the annoying music in the background!
Seriously thank you for making this video. Made my life so much easier.
You are welcome!
Man I am so glad that I found this! The way that you make these videos Aprilia should pay you for training their new owners!
I have a brand new 2021 Tuono. I asked the dealer to set my shift light at about 7,000 for the break-in but now I am past it. I cannot figure out how to reset it myself to maybe 10,000? Could you please let me know how to do that if you know? I can't find it in a book.
Thanks so much. I just uploaded a video on how to change the shift light. ua-cam.com/video/jRT-hlOUs08/v-deo.html
im getting this bike by end of 2022 and your videos are helpful to prepare me when i got it
Awesome. Thanks for liking and feel free to subscribe for notifications of more similar videos I upload.
Awesome video.....Thank you so much. I've been looking for a video like this all year. Great Video!
Thank you.
Thank you for making this video. I was searching everywhere for the how to on this bike.
Will you make a video showing how to use the few other functions not covered like pit lane speed limiter, launch control, cruise control and all the buttons? Also, how do you reset the Trip A odometer with out resetting the other recorded functions like max mph and average mpg and such?
Thanks again
Thank you and thanks for the suggestions. I will plan to do those.
Hi thanks for the wonderful information you pass on to viewers, I would love to know if the model rsvarr 2022 has a lin angle display
Thanks for watching. It does not have a lean angle display.
Thank you so much for that it was really helpful as the user manual might as well by written in Hebrew.
You are welcome.
Thank you for the video. How do you get the fuel gauge to show instead of the aPRC logo on the dash?
Thanks for wathcing. I no longer have this bike hence can't answer
Thx for the Videos. Help me a lot.
How can I Set my Personal User code? I cant confirm that in the settings. And where did you get the nice table of settings?
Hi Jo Jo...thank for watching. You can access the user code function in the service menu. Default is 00000. The table of recommended settings is on page 129 of the user manual. Hope this helps.
Thnks for the video nice work.I have only one question, aem in 1 is the map with the most power and more agressive? because i cant tell the difference.
Thanks for watching. That is correct.
Brilliant learning lots the book confuses me for some reason ( like I didn’t know to hold the mode button to get into that setting screen ) question for you I have a Tuono like I said b4 when I start my bike the suspension icon comes on then goes off after a second or so ? I haven’t noticed it b4 can you see if your RSV4 does it to please 🏍🏍👍as b4 loving this series
That's likely the electronic suspension alarm if you have it. It does not come on/go ff on my RSV4.
Hey bro question. I have the exact same bike and I’m having an issue where the throttle cuts off for a second at 7000rpm on 6th gear. Is this one of the interventions?
Hi there...I've never had that issue before. Not sure what's causing that.
@@brilliantspeedsuperbikes so must be having problems with the upper injectors from what I’ve read on the forums…. The upper injector are supposed to start spraying at those RPMs and when they don’t that is the result.
Thank you. So helpful. Where did you get the full sheet?
Buried somewhere in the owner's manual.
i like the 70s pron music vibe
Hi .. can I access street settings and do some changes?
So would engine map 3 be the most limited and engine map one be the least limited ?
is it right that the road user mode has 140 hp? instead of the full ~200hp
once you change the settings do they stay permanent or once motorcycle is turned on and off they return to factory settings ?
They should stay until you go back in and change the settings.
my friend. my aim solo2 crashes with rsv4 2022. you have the basis in the video. How does it work for you? please help friend. thank you
How did you fit the aim solo rubber stem for the mount? I have a 2021 base, and the stem I received for the RSV4 mount was to large in diameter. Ended up using an R1 stem.
If memory serves, I got a bike-specific stem mount and it worked.
Question does the bike have a lien angle indicator?
Thank you
It does not. Thank you.
They moved it into the app on the phone if you want to see that information now.
Hi, thanks for the interesting video. Is there a riding mode with substantially less horspower? If so, how much HP is used?
Hi...not sure how much HP in each mode. But AEM Level 1 is most aggressive with full power, and Level 3 is least aggressive and recommended for rain conditions.
My atc & awc keeps turning off for some reason, have you encounterd this issue?
Hey, I’m having trouble switch modes when I’m in the advanced settings screen say at 8:00 mark, how do you switch to customize track2 from there?
Keep hitting the down arrow until it toggles over to the next column.
Can you fully turn off wheelie control ?
Great job!
how do you get the fuel gauge to come up in the top right corner?
I have a question about riding modes. I don't know how to change APRC Level without User and Track 1 modes, or it just can be changed the Level only 2 riding modes? Please help me solve this problem
Thank you!
ua-cam.com/video/cEr7qIZE95s/v-deo.html&ab_channel=BrilliantspeedSuperbikes%26Motorsports
Hey I'm not sure I understand your question, but if you see the above video starting from 12:20, it takes you through the 6 maps (3 for road mode and 3 for race mode) and shows you which ones you can or cannot adjust. Then it takes you to the bike and shows you how to adjust the ones that can be adjusted.
I would like to know how to toggle between the modes and change the settings while in T1 and T2 screens (T2 shown at 2:56) mine always sitting in ATC and I can use +/- clicker, but how do I move to the other boxes such as AWC, AEB, etc? I think only the User mode allows changes but could be wrong
this guy moving between various modes and modifying setting actively from T2 screen - his bike is 2020 ua-cam.com/video/K00vRcZTX-8/v-deo.html
Is there a way to have the speed displayed larger on track mode?
ua-cam.com/video/MR-fPVdcwC8/v-deo.html
It's already displayed quite prominently. If there is a way to make it bigger, I haven't discovered it yet.
hello, did you try to enable launch control?
No...not yet.
Once you're in the 7 settings editor for each mode, how do you move over to your other two modes to edit their settings?
You scroll all the way down until the cursor moves over to highlight the next column.
@@brilliantspeedsuperbikes Jeez I am not bright lol, thanks for the heads up.
Was screwing with it for awhile trying to figure it out but didn't think to do that.
Many thanks!
@@Viverino you’re welcome. It’s not intuitive.
@@Viverino me too bro, I was trying everything I could to switch the other two modes end up fail hhh(between user/street/sport)
Thank you for this, I’ve got another problem like when you hold still the throttle between 3k-5k rpm, cruising around 30mph, the bike goes in bursts, like an ev car pushing intermittently, is it related to the AEM or AEB settings?
I cant see where you what buttons You press ..