making a simple cabinet using basic tools/paano gumawa ng simpleng kabinet

[@joeduvall3891]

It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better ua-cam.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.

[@rafaswoodcraft]

Thanks for watching

[@joelocuaman]

Ang galing naman po Gosto ko ren matotong gumawa ng kabinet e

[@rafaswoodcraft]

@@joelocuaman kaya nyo din po gumawa sir practice lang po

[@organicboostingmpl]

magandang gabi napakaganda ng iyong mga likha idol. ipagpatuloy mo lamang ang iyong talento

[@rafaswoodcraft]

Thank you po

[@myadventurevlogs1144]

Wow, ang ayos ng pagkakagawa, nice craptmanship ..

[@rafaswoodcraft]

Thank you po

[@jdarerbac9802]

ito ung tinatawag na skill. galing mo lodz

[@rafaswoodcraft]

Thank you po

[@MikaSangalang6671]

Mukhang madali lang gawin .pero mahirap . Sipag at tyaga talaga .

[@rafaswoodcraft]

Thanks po

[@mixnikuya2946]

Salamat boss sa magandang kaalaman sa cabinet.God bless po

[@rafaswoodcraft]

Thank you po

[@JunTiksayVlogs]

Salamat sa video mo idol mayron akong kohang aral dito❤😊

[@rafaswoodcraft]

thank you po lods God bless panoorin ko rin mga video nyo more power

[@lhenmarila3190]

Ang galing ni kuya..sana all

[@rafaswoodcraft]

Thanks for watching po mam

[@travelifestyleph.1569]

Nice ,Ang Ganda Ng pagkàkgawa niyo po.

[@rafaswoodcraft]

Thanks for watching po

[@sherwoodforrest]

Napaka skilled nyo po. Keep it up

[@rafaswoodcraft]

Thanks po sir

[@JunNaling]

Galing tuloy tuloy lang sir, keep it up more power sir

[@rafaswoodcraft]

Thanks po

[@cyberhomechanneltv9456]

Galing mo boss, ganda pagka gawa boss

[@rafaswoodcraft]

Salamat po

[@tenggoyztv5071]

Ok lods galing mo👍

[@rafaswoodcraft]

Thank idol

[@Sedulor-slamet]

Terimakasih banyak sudah mau membagikan ilmunya 🙏👍

[@lorenakati]

Ito ang tinawatag na talent, galing Nyo po, ganda ng gawa nyo

[@rafaswoodcraft]

Salamat po

[@rodmriver]

Nice... its a Good Job...

[@rafaswoodcraft]

Thanks for watching po

[@bryanvalenzona3684]

Galing mo nmn lods

[@rafaswoodcraft]

Thank you lods

[@budoyvlog]

Ayos.....👌👌👌

[@rafaswoodcraft]

Salamat kabayan idol🙏🙏 hehehe😁

[@djkemzofficial2038]

Very educational. Keep working this kind of videos sir.

[@rafaswoodcraft]

Thank you, I will

[@nephsoundwork781]

Nice idol👍 watching idol

[@rafaswoodcraft]

Yes, thank you

[@vernonpaul1347]

Superb, who needs all those fancy noisy tools.😂

[@rafaswoodcraft]

Thanks for watching 😊

[@LesPoquiz]

Nice Vlog, request po sana to content ng tools and materials na normally need sa pagawa ng nga ganyan, like cabinets, Computer Table at iba pa. Maraming salamat po 😍

[@rafaswoodcraft]

Thank you so much po🙏

[@archflynn7565]

@@LesPoquiz tama para matuto rin mga baguhan. Dagdag content na rin.

[@ironvsfiretv6204]

Ang galing mo pala lods?

[@rafaswoodcraft]

Salamat lodi

[@mamalheyroslin1338]

galing ng kamay mo kuya..ka mommy lhey tinderela po

[@rafaswoodcraft]

Thank you po

[@meganledesma5091]

Pre your the best

[@rafaswoodcraft]

Thank you pre

[@gmakhanes8961]

Biglang lumabas sakin to ok din hilig ko rin mag diy

[@rafaswoodcraft]

Thanks for watching po

[@accountalkseasier2142]

galing ni kuya ansipag pa

[@rafaswoodcraft]

Thanks po ❤️

[@user_bilal]

good job, nice cabinet

[@rafaswoodcraft]

@@user_bilal thank you!

[@kalasa26]

Galing nman

[@rafaswoodcraft]

Thank you po 😊

[@JunTiksayVlogs]

Wow ang galiing mo idol ❤

[@crisantobartolini9657]

wow ang galing nyu naman po

[@rafaswoodcraft]

Salamat po☺️

[@artsnlife47]

Thank you for this useful video

[@rafaswoodcraft]

Thank you po mam 😊

[@JhunDumsTVXj]

wow amazing

[@rafaswoodcraft]

Thank you

[@bambooku]

❤❤❤ from Indonesian

[@rafaswoodcraft]

Thanks for watching

[@ednadeguzman1903]

Nice craftsmanship, 1/2 edges will make the cabinet smooth looking.

[@rafaswoodcraft]

Thanks mam🙏

[@chardserranovlog8303]

Ok lods.. Good job lods.. Lods new friend and subscribers lods.. Always support lods.. Ingat sa work

[@rafaswoodcraft]

Thank you po idol God bless po

[@atedesmixtv5084]

Ang galing nyo naman po gumawa ng cabinet

[@rafaswoodcraft]

Thank you po

[@TinayTagorda]

Ang galing Naman gumawa

[@rafaswoodcraft]

Thank you po for watching 😊

[@keemzero4151]

grabe 10mins lang nya ginawa yung cabinet. idol

[@rafaswoodcraft]

Hehe thanks for watching idol

[@MinsetGaming]

Edited yung video malamang 10 mins lang hahahha

[@rafaswoodcraft]

@@MinsetGaming hehe opo sir

[@carmeladiumano6618]

ang bilis nyo po gumawa ng cabinet idol

[@o-gesto6755]

Galing lodi

[@rafaswoodcraft]

Salamat lods😊

[@boxing_reign]

nice skills sir keep it up

[@rafaswoodcraft]

Thank you, I will

[@rafaswoodcraft]

Thank you po

[@bastisab]

Galing mo lods.. Hirap maglagari ng ganyang kakapal na plywood..

[@rafaswoodcraft]

Tyagaan lang po sir hehe

[@eyeshieldgalamiton6905]

Ang basic na tools na gamit nyo lang is lagari...
Lahat power tools na...
Ako gumawa ako ng cabinet lahat halos mano2 pag gawa wala kasi ako power tools...kahit pag gawa ko ng butas para sa concelled hinges mano2 din...
Yun ang pinaka basic...pero disclaimer lang po d po talaga ako karpentero...nanonood pang din po ako ng mga diy videos...
Pero boss...hanga din po aoo sa nyo...ayus din ang gawa nyo...

[@kaalamantv9524]

Nice idol

[@rafaswoodcraft]

Yes, thank you

[@SecretLee]

Hi. Merun po ba kayo video on how ikabit ang cabinet hinges? Para pantay yung cabinet door?

[@rafaswoodcraft]

@@SecretLee thank you po gagawa po ako ng video how to install hinges salamat po sa support

[@rpmselarom854]

Ano Po magandang gawing cabinet Kuya Yung plywood ba o plyboard at ano po pampakinis na ginamit mo SA board?

[@rafaswoodcraft]

Plyboard po mas mura po sya, liha lang po gamit pampakinis kasi makinis na rin naman po yung plyboard salamat po

[@janahjeanabella2381]

Pwde po malaman ano anong sukat mga yan sir isang buong flywood lang gamit mo?

[@rafaswoodcraft]

3ftx3ftx1ft po sukat mam

[@bugsgarage2951]

Magaling po!

[@rafaswoodcraft]

Salamat po❤️

[@meganledesma5091]

I love u pre

[@ahlekssa]

nung tawag dun sa equipment parang ni shape or ni balance or ni grind nya yung may mga sobra sa sides nung kahoy?

[@rafaswoodcraft]

Trim router po mam

[@AlfieOcfemia]

Ano po mga materials sir ginamit

[@rafaswoodcraft]

@@AlfieOcfemia plyboard 3/4" po ginamit ko dyan

[@vinjzpabz7545]

Ganda ng paggwa sir..ano tawag sa pang pako nio sir??

[@rafaswoodcraft]

Electric nailgun po sir thank you po

[@EllahRennisonVlogs]

sa kabuuan at panglikod? ano po gamit plywood at sukat

[@rafaswoodcraft]

Plyboard po and yung pang likod po 1/4" plywood

[@joymarkdian2771]

Ang galing mo sir. More tutorials pa po. Ano po pala mga pangalan ng materiales nagamit ninyo? Salamt po

[@rafaswoodcraft]

Thanks for watching po

[@rafaswoodcraft]

Plyboard po gamit sir

[@ednalynnatividad2893]

Sir ano pong wood gamit nyo. And materials na din.

[@rafaswoodcraft]

Eto po ang material na nagamit ko po dyan sa small cabinet mam
1 plyboard 3/4"
1 plywood 1/4"
Liston/edging ½X1
Stikwel
C1 concealed hinges

[@AlexisLibunao-jw9yv]

Galing idol soilid. Tanung lang idol anu mga materials ginamit mo para makagawa ng ganyan cabinet? Thank you in advance.

[@rafaswoodcraft]

Thank you po sir eto po materyales na nagamit
1 pc plyboard 3/4"
1 pc plywood 1/4"
4 pcs ½x1 edging
2 pairs #1 concealed hinges
2" finishing nails
1" finishing nails
Wood glue

[@mariafonseca1481]

👏🏼👏🏼👏🏼👏🏼👏🏼

[@alen670ify]

sir.. anong klaseng flywood po ang gamit nyo at anong size pra sa pggwa ng cabinet.. tia po..

[@rafaswoodcraft]

plyboard po thanks po

[@marygracevalle2645]

sir ano pong tawag jan sa mliit nio na pang katam?..at ska po ung manipis na inilalagay nio sa gilid?.

[@rafaswoodcraft]

Yung manipis na na pang edging po is liston ½x1"
Katam naaliit lang po yung gamit ko dyan mam mumurahin na katam lang po nabile ko sa lazada, thanks po

[@rjdolalas7480]

Anong tawag sa board na ginamit niya? Balak ko po kasi magpagawa ng laundry shelves

[@rafaswoodcraft]

plyboard po 3/4"

[@ranzcator1246]

Stickwell po bayan?

[@rafaswoodcraft]

Opo thanks po 🙏

[@manalolittlefarm7158]

Mahusay po

[@rafaswoodcraft]

Salamat po

[@christianlunaii5844]

Hi po anong tawag sa parang baril or driller na pula n gamit mo po? Thanks po

[@rafaswoodcraft]

Electric nail gun po sir mitsushi brand po mura lang nasa 1k+ lang po

[@serendipitythirteen98]

ano po twag sa pinang babaril nyo parsng stapler po ba yan?

[@rafaswoodcraft]

Electric nailgun po

[@EllahRennisonVlogs]

Ano po gamit na plywood?

[@rafaswoodcraft]

Plyboard po mam

[@marryqueencarabio7077]

Anong kahoy po yung gamit niyo tapos bali ilang pcs yung na gamit sa pag gawa into po Niyan?

[@rafaswoodcraft]

Plyboard po 1 piraso tsaka 1/4" plywood para sa backing mam

[@crisdelapena2757]

Sir anong pong playwood gamit nyo slamat

[@rafaswoodcraft]

3/4 plyboard po thanks po

[@floranteugbamin8502]

Wala po bang sounds? Yong mga gamit na kahoy at yong parang adhesive? Gusto ko sana matuto

[@rafaswoodcraft]

Thanks po mag upload po ako step by step ng cabinet making for beginners thank you po!

[@whitechocolate4072]

Trabaho lang bahala na kay dyan, wala ng sukat sukat hahaha

[@rafaswoodcraft]

Hahaha opo

[@lerei8862]

Kasya po ba isa plywood sir? 4×8ft

[@rafaswoodcraft]

Yes po mam kasya po isang buong plywood

[@j-zone9538]

Ano yan gamit mo sir. Plywood or plyboard?

[@rafaswoodcraft]

@@j-zone9538 plyboard po sir

[@shirleymallari9760]

Hi po,new subscriber po,ask ko lang po ano pong glue gamit nyo,ung pangalan po,gusto ko din po kasing magpagawa sa asawa ko nyan para hindi na kami bibili

[@rafaswoodcraft]

Hello po stikwel lang po gamit ko glue mam salamat po God bless

[@cassbabyahri2775]

Anu tawag duon sa pula na electric

[@rafaswoodcraft]

Electric nail gun po thank you po

[@nidadeomampo6802]

Anung wood gamit nio..

[@rafaswoodcraft]

plyboard po

[@Sam-yp1pe]

ano tawag sa inaaplay mo na pamdikit sa kahoy

[@rafaswoodcraft]

Stikwel po sir

[@ryanorcullo3068]

pwede poba lagyan ng hinges ang 1/2 na plywood sir?thanks

[@rafaswoodcraft]

Pwede po kaso yung ordinary hinges lang, hindi po pwede yung concealed hinges sa 1/2 plywood

[@rafaswoodcraft]

Or pwede nyo din lagyan ng 1/2x2 na kahoy paikot para kumapal yung 1/2 para maging 3/4"

[@ryanorcullo3068]

ah..gnun ba sir salamat sa info sir

[@rafaswoodcraft]

Welcome po sir

[@Ra_chelSumayao]

Hello sir anu ..po sukat nyan sir pa share naman po

[@rafaswoodcraft]

Hello po yung sukat po 36x36x12 inches po thanks po

[@Albert-ck9vw]

Sir the wood is plywood or what do we call?

[@rafaswoodcraft]

Plyboard po sir

[@Albert-ck9vw]

@@rafaswoodcraft thankyou for your reply 👍

[@rafaswoodcraft]

@@Albert-ck9vw welcome

[@AnjzRocacorba]

Ano pong tawag sa ginamit nyong tools na kulay pula ?

[@rafaswoodcraft]

Electric nailgun po

[@jhonajanenogadas6154]

Ilang nagamit mo na flywood?

[@rafaswoodcraft]

1 pcs plyboard and
1/4" po sa backing board po, Thanks for watching po

[@MrDojee]

👍👍👍👍👍👍👍

[@dhonglibardos7063]

anong tawag sa glue na pang gamit mo po sa wood ??

[@rafaswoodcraft]

Stikwel po sir

[@tinakahong2326]

Sir ano Yung ginagamit mong pandikit?

[@rafaswoodcraft]

Stikwel lang po

[@crislubetania1985]

Sir pwd malaman ang mga sukat,?

[@rafaswoodcraft]

Yung taas po 3ft yung lapad 3ft tapos 12 ft yung kapal nya sir

[@pomporoy5763]

master

[@InspireForward369]

legends says he still planning that cabinet door

[@rafaswoodcraft]

Thanks for watching!

[@meikilettymadlela8894]

May I don't know how to use saw but when I cut with it it always not level.

[@rafaswoodcraft]

Practice makes perfect hehe

[@gauvainandaya7385]

lods magkano ang ganyang cabinet?

[@rafaswoodcraft]

Mura lang po lods

[@JovenAlbarida]

Sir ano po mga materyales gnamit niu?

[@rafaswoodcraft]

plyboard lang po sir, liston, 2 pairs concealed hinges#1, yun lang po thank you po

[@ranelgalit2499]

Bossing anong sukat nyang ginawa mo?

[@rafaswoodcraft]

Sir 36x36x12 inches po

[@marmelynlachica7552]

anong tawag po jan sa nilalagay nio na pandikit sir?

[@rafaswoodcraft]

Stikwel glue po mam

[@rafaswoodcraft]

Thanks for watching po🙏

[@eduardocanlas4563]

Saan lugar yan

[@rafaswoodcraft]

@@eduardocanlas4563 Pssay po

[@evaleyte1889]

Magkano po sir ang gagastosin sa ganyan cabenit

[@rafaswoodcraft]

Nasa 2k po mam

[@sandralyngabion4129]

ano po gamit nyo na glue?

[@rafaswoodcraft]

stikwel wood glue po

[@jmairgela9187]

anong klase po wood gamot nyo

[@rafaswoodcraft]

@@jmairgela9187 plyboard 3/4" po ginamit ko

[@TinayTagorda]

Sir anong tawag diyan SA pangbbarena niyo na ginamit pati Yung pampako na de kuryente salamat

[@rafaswoodcraft]

Electric nailer po mam

[@TinayTagorda]

Thank you po

[@rafaswoodcraft]

@@TinayTagorda thank you po mam

[@ZiamarCagadas-pw6xn]

Ano po yung pinandikit?

[@rafaswoodcraft]

Stikwel wood glue po

[@rafaswoodcraft]

Thanks for watching po!

[@ZiamarCagadas-pw6xn]

@@rafaswoodcraft sir maganda kung may vedio po kayu yung ipakita mo yung mga tools na gagamitin tsaka mga pangalan nito.para po may idea kami kung ano pangan if ever bibili kami ng mga ganyamg tools.start today lagi npo akonv manunupd sa mga vedio mo

[@rafaswoodcraft]

@@ZiamarCagadas-pw6xn opo next video po isama ko po hehe, newbie lang po kasi sa youtube hehe

[@evinisserlaluna224]

ano pong tawag don sa tool na pangkiskis niyo na maliit?

[@rafaswoodcraft]

Katam po

[@bisdakslifemixvlog1170]

Sir ordenary plywood lng po ba yan gamit mo?

[@rafaswoodcraft]

Plyboard po sir