sorry to be so off topic but does any of you know of a tool to get back into an instagram account? I was stupid forgot the account password. I would love any assistance you can offer me!
@Marlon Adam I really appreciate your reply. I found the site thru google and im trying it out atm. Takes quite some time so I will get back to you later with my results.
Can you do a video on changing the headlight bulbs. I pulled my lights and there was nothing to remove to install bulbs maybe the whole back is a cover IDK
If your headlamps look like ones I have on the video , then you are unable to change bulbs. They are not serviceable and are LED lights that are soldered into place. If the light are not working, then the entire headlamp needs to be replaced
One of my daylight running lights doesn’t work during the day but when it’s night out and I have them on auto it’s on and bright as the other one. You happen to know what may cause that?
Hi thanks for the informative vid. I have to remove my bumper for the same reasons but my gap is a lot more noticeable. My first time taking off my bumper on my Lexus. My question is after you remove the bolts and clips and have the bumper ready to pull off, are quickly pulling the sides of the bumper to release it from the rest of the body or should it be in a slow motion so you don’t yank too hard or too fast ? Asking so I don’t break the clips as you mentioned.
hello and thanks for the videos but I assumed since you have led twin headlights, what do you know about replacing the led's rather than buying a new headlight? currently my is350fsport driver low beam doesn't work and I can't find anything regarding replacing the led's.
Question , is it possible to do a bumper conversion on a 3IS ? I have a 2015 is250 base base model no f sport . I wanna get a f sport bumper and grill just don’t know if placement would be the same . Thanks in advance !
Hey I was wondering if I can change my 2014 is350 non fsport bumper to a is350 sport bumper, or would that mess my car up? I don't like thew look of the grill on my car compared to the f sport.
I have a question, I have a 2015 Lexus IS 250 base model, do you know If the F series grill would work or fit on the base model? Looking to swap if possible
Are the tabs and clips that need to be replaced to align things properly only on the fender. ....or is there second part of the clip that is on bumper that needs replacing as well. Meaning both fender and bumper need tabs on each side. Or bumper tabs fine, just the fender tabs crooked?
Are the front grills interchangeable with ALL IS models? I want to switch my grill to the F Sport mesh grill but am afraid that the clips are different.
They may look the same but they are not the same. the front badge I am unsure how to take off. I am sure it is probably self explanatory once you get to the rear of the grill where the emblem attaches
Yes you will need to remove bumper to change the grill out. I explain what needs to be done how to remove grill . It's a lot of time to remove the grill. Its self explanatory once bumper is off
Hi if I have a 2014 Lexus IS 250 base model & want to upgrade the grill to look like a sport (which is how yours looks) , will I just need to buy a new grill to replace it? Or will I need to buy a whole new front bumper and grill?
How can I remove the front emblem all the videos I watch shows that it has 6 screws but mine only has a clip and two rubber things stopping it from coming out
Have you ever had the check headlight system light pop up on this car? Need help trying to fix it. My car just did it today. It only shows up at night though.
Sorry I have never had that light come up. Do you have coilovers or lowering springs installed ? I would maybe check the height sensors for the headlights system that is attached to suspension if it has been touched before
Thanks for the video. Do you know how to change the headlight? I have a 2014 Lexus is250 and one of my headlights was broken. I'm sure I need to take out the front bumper before I can change it. But I don't know how to do it after that. Do you have any advice?
Yeah you will have to take the front bumper off, if you can get the bumper off you should be able to see the bolts holding the headlamp into place at that point. Should be about three or four 10mm bolts for each headlight
Seems as if putting the bumper on is harder than taking it off. When going to screw back in the 10mm screws, nothing lines up. Like the liner on the bottom, bumper, and the hole the screw is supposed to go into. Any help?
Thanks for the clear concise video. I am having a little trouble with a base is250 headlight. It goes on a bit less bright and then goes out a few seconds later. 1. Is it hid? 2. If so does it sound like a ballast?
You're welcome. I think in your situation it might be a bad bulb. I would replace that first before looking at the ballast. A bulb would be cheaper to replace than that ballast anyways
Hey Rodney thank you so much. I need to take my bumper off,to fix my DRLs due to some oxidation or whatever is wrong with them. Gonna sand em and all that. This video helped alot. When putting it back on, it's just the top part and side that need to click back on right?
Just where the fender meets the bumper where it needs to "click" back into place. But make sure the bottom portion of the bumper is in place, that's the area to watch out for when reinstalling. The tricky part
yes it is tight so it doesnt come loose by accident. You need to press the release tab harder or use a pick or small screw driver to help lift up the release tab.
From Japan, I actually traded with the japan owner for my US spec headlights at the time. Check Yahoo.jp Auctions for used set or ebay sometimes as well. Good Luck!
No it won't. The two cars are two different generations so body parts aren't shared. You can find aftermarket companies making bumper for older IS to make it look like the newer one.
Thanks for the video. Informative. Get some old military wool blankets to put on the ground to protect the bumper paint. Theyre good and strong so they will survive light work with no problems. Maybe $15-20 at a surplus store.
*hey man btw do you know if the front end of the 2017/2018 year Lexus can be switched with the 2015/16 model? like the hood bumper headlights and fenders?*
It's doable, not easy task though. Read through this thread on club Lexus forum for more details. www.clublexus.com/forums/is-3rd-gen-2014-present/871635-retro-fit-2017-f-sport-to-2014-f-sport.html
Hood and fenders are the same. Only headlights and bumper need to be swapped. Hardest part is the wiring change out to support new headlamps. There are CANbus wires running to the new configuration that is not on the headlight harness of the 14-16 year models
Was never able to get rid of the gap. I caulk it up to guide tabs under the headlights missing/broken probably causing the sag and the gaps where the fender and bumper meet up
I like how you did, seems like you're a professional at doing this, I have a Is300 fsport and the driver side light in the bumper is condensate how can I fix that, any suggestions? Donald
You can try taking out the turn signal light bulb and let it try to air out with like a blow dryer. But there is chance that there is a crack on the housing and it will keep happening.
never actually figured it out. My assumption is that maybe some alignment tabs on the bottom of the headlight snapped off so it allows the bumper to sag a a bit and thus the ugly gap between the fender and bumper
Thanks for the Video! Can you confirm that the DRL (Daytime Running Lights), shaped like the Nike logo, can only be replaced after you remove the bumper? My right side DRL is out. I don't think it's a fuse because I believe a blown fuse would cause both sides to go out. Thanks! -Hank
I'm also having the same problem I got the same foglights as you the dealer wants to charge me like $525 they blame the foglights for the daylight running light out but they are seperate wiring and everything
@danny, not sure how to help you have the OEM JDM ones ? who installed them? where was wire tapped? for the Day time rnning lights out, is it out during the day or only out when headlights are on?
The grill is very hard to remove from the bumper, need to first take the bumper off, then undo some phillip screws and release a lot of plastic retaining clips all at the same time for it to pop out of the bumper
sorry I wish i do. I installed my fog lights years ago already.... I heard some cars actually have wiring in the car, just need to get the switch on steering column replaced with one with foglight switch. Search the Clublexus forum for more details
depending on the fog light. I know for the JDMtoys fog light you just have to turn the wheel and remove the three front bumper tabs. It will provide enough space to work with. This method will only work if you are tapping on the existing rdl wires.
Michael it looks like that's the path I'll be taking. Have you seen anyone tried to fit the new IS bumper? I feel it has a more aggressive styling, what are your thoughts?
you mean the 2017 model? As for me, i purchase my car at the end of 2016 so i had an opportunity to get the 2016 or 2017 model. I really like the 2016 model haha. I like the front of the 2016 and rear of the 2017 model haha
It's not about it detecting it's unplugged, it's that it has moved slightly when you unmount bumper and mount back up. It may have moved millimetres but it moved and the system will assume it's still in original position and system will use those sensor data but it will be slightly wrong. Can you get away with it? Maybe but it's not going to be perfect
Rodney Au I just bought a cpo 17 nx - just noticed that it has a huge gap on the left bumper. Should I be worried whether there was any work/damage on the bumper before or is this common to see in Lexus and just a quick fix that the dealer or a mechanic can do?
Hey do you know of anyone who’s put an F-sport grille on the base model? I needed to change out the bumper due to an accident so this video is going to help alot thanks man!
here's a good forum post on Club Lexus from years back, its a good read. www.clublexus.com/forums/is-3rd-gen-2014-present/860542-noobierices-bumper-removal-guide-and-base-model-to-f-sport-conversion.html
If you have dual projectors like I have, they are LED and cannot be changed. It's all in one unit and if a headlight goes out, the whole headlight has to be replaced
If you have dual LED projectors that looks like mines, you can't. The whole headlamp has to be replaced if there is something wrong. The expective life of LED should outlast ownership of car. Sounds like something got wet inside maybe if only one headlamp stopped working. I would also check for fuses to make sure they are not blown.
specONE i have the “IS 300h” (2014) The left low beam starts to flicker and some times doesn’t work but i don’t get any warning light on the dash board. I have to switch the lights on and off to stop the flickering. And it’s only the left headlight. (I assumed it needs changing)
Fog lights already installed on my car so I wouldn't want to redo it on this one. I may in the near future help someone else also with a 3IS install fog lights on their car and will try to record how to do it. Stay tune for that.
@@specONEwould you give me some info, because my front bumper is to be replaced by the dealership, and I ordered an f sport grill, they told me they ordered the wrong bumper because the fog lights are a bit off. I assume it's an f sport bumper and I'd be happy with that bumper instead. What would I need to do to modify the fog lights to fit?
@@bboypez sounds like it is the Fsport bumper then if the standard fog lights don't fit. You gotta get Fsport bumper specific fog lights for the Fsport bumper
If you have dual LED projectors that looks like mines, you can't. The whole headlamp has to be replaced if there is something wrong. The expective life of LED should outlast ownership of car. Sounds like something got wet inside maybe if only one headlamp stopped working. I would also check for fuses to make sure they are not blown.
do you know any website that sells a new/used headlamp for cheap? water gets inside mine so its made the LED projector light turn off on mine but turn signal light still works.
+carlos mendoza I could in future if I ever have to take my headlight out again. But it wouldn't be anything soon. It's not something I would want to really of just for a video. What trouble are you having?
+carlos mendoza do you have HID or LED headlights? LED you can't change a bulb, if it don't work, whole headlight housing needs to be replaced, send me message with picture of your headlight and I can tell which headlight version you have. Please also subscribe to my channel. Thanks
Fsport bumpers from 2014 do not have sensors.. If there are sensors, its recommended calibration for the radar parking sensors if bumper is removed and reinstalled (something that cant be done DIY)
Thanks, the side skirts are original by Skipper Japan. Here is replica copy of them they sell on ebay rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338108305&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sop%3D12%26_osacat%3D0%26_odkw%3Dcarbon%2Bfiber%2B2014%2Bside%2Bskirt%2Bis350%2Bstyle%26_from%3DR40%26_from%3DR40%26_trksid%3Dp2334524.m570.l1313.TR0.TRC0.H0.XCARKING%2BFit%2B14-16%2BLexus%2BIS%2BJDM%2BStyle%2BSide%2BSkirts%2B.TRS1%26_nkw%3DCARKING%2BFit%2B14-16%2BLexus%2BIS%2BJDM%2BStyle%2BSide%2BSkirts%2B%26_sacat%3D0
The cutoff of the two pieces of the sideskirts is right where the front and back door meets in the middle. Is that line noticeable? They designed it in such a way at least some thought was put into it.
specONE I hit something in front. And now there is a warning message "pop up hood erro". I'm trying to reset it myself before I drive in to service centre.
Awesome video. I LOVE how you get STRAIGHT to the point and give detailed instructions. Repairing front bumper on is350 F-Sport. 👍🏻
Great and detailed video. Love how you show the details on the snaps and how it works.
sorry to be so off topic but does any of you know of a tool to get back into an instagram account?
I was stupid forgot the account password. I would love any assistance you can offer me!
@Alex Keenan instablaster :)
@Marlon Adam I really appreciate your reply. I found the site thru google and im trying it out atm.
Takes quite some time so I will get back to you later with my results.
@Marlon Adam it did the trick and I finally got access to my account again. I'm so happy:D
Thanks so much, you really help me out!
@Alex Keenan you are welcome =)
the sound loud then down then loud . keep it leveled bro
Just keep it quiet fr
Thanks for doing this. I’m about to do it right now to my 2016 ES. Have to repair a crack in my headlight fixture. Helped quell some of my fear.
hey is it possible to install this F sport bumper onto my non f sport 3 is?? thanks in advance.
Yes it's possible, you need the grill along with the bumper for the swap.
Can you do a video on changing the headlight bulbs. I pulled my lights and there was nothing to remove to install bulbs maybe the whole back is a cover IDK
If your headlamps look like ones I have on the video , then you are unable to change bulbs. They are not serviceable and are LED lights that are soldered into place. If the light are not working, then the entire headlamp needs to be replaced
One of my daylight running lights doesn’t work during the day but when it’s night out and I have them on auto it’s on and bright as the other one. You happen to know what may cause that?
Great video. I need to replace my lower fog light triangle peice on the bumper. Do I need to remove the bumper to replace it or it's a clip on ?
Don’t know why I have a fear when I resinatall the bumper, it’s gonna fall off later on😂 my anxiety
you got this! just gotta do it slow and take your time.
Try replacing engine mounts, then have that fear the engine will tear out or come loose.
It’s actually a shock that only a few fasteners hold this huge bumper in place.
@@mikeschiavoni5973 once you removed and replaced them and torque them you should be just fine, did my son's on his RSX and it was a breeze.
@@donaldramsamugh1723 actually went well. Improved ride and zero vibration at idle. And power tested, engine is not coning out :)
Hi thanks for the informative vid. I have to remove my bumper for the same reasons but my gap is a lot more noticeable. My first time taking off my bumper on my Lexus. My question is after you remove the bolts and clips and have the bumper ready to pull off, are quickly pulling the sides of the bumper to release it from the rest of the body or should it be in a slow motion so you don’t yank too hard or too fast ? Asking so I don’t break the clips as you mentioned.
Just a light tug. Imagine you’re the clip; which way you should be pulled off
hello and thanks for the videos but I assumed since you have led twin headlights, what do you know about replacing the led's rather than buying a new headlight? currently my is350fsport driver low beam doesn't work and I can't find anything regarding replacing the led's.
Can't replace, it's not a serviceable headlamp. If led goes bad, need a whole new headlamp housing
Nice work. Thank you for the video. I have a base 2014 is350, is it possible to replace the bumper cover to a mesh or F-Sport cover?
Im waiting on that answer myself
Dope video and tutorial, Thanks. The music is a bit loud when you're talking though.
Sorry about that
Question , is it possible to do a bumper conversion on a 3IS ? I have a 2015 is250 base base model no f sport . I wanna get a f sport bumper and grill just don’t know if placement would be the same . Thanks in advance !
Yes its possible to convert your bumper to Fsport version on base model
I have a 2016 Lexus 200t f sport but I like the newer front bumper look from 2017. You know if it’ll fit?
It will fit, but you will have to replace the headlight also with the new one. Wiring the new headlights in will require alot of work
Would you know where I can buy bumper retainers for my 16’ IS300.. driver side and passenger
I would check with your Lexus dealerships Parts department
Hey I was wondering if I can change my 2014 is350 non fsport bumper to a is350 sport bumper, or would that mess my car up? I don't like thew look of the grill on my car compared to the f sport.
Yup you can. It's been done before by o others
I have a question, I have a 2015 Lexus IS 250 base model, do you know If the F series grill would work or fit on the base model? Looking to swap if possible
The whole bumper needs to be swapped to fit a fsport grill. The two are not interchangeable
I take it when reassembling bumper the fasters lock back in place?
yes they will snap back into place as long as the tabs didnt break when removing the bumper
Are the tabs and clips that need to be replaced to align things properly only on the fender. ....or is there second part of the clip that is on bumper that needs replacing as well. Meaning both fender and bumper need tabs on each side. Or bumper tabs fine, just the fender tabs crooked?
How do you remove Impact bar lexus is 300 2016 that has wire on impact
Sorry I don't know the answer to this
Are the front grills interchangeable with ALL IS models? I want to switch my grill to the F Sport mesh grill but am afraid that the clips are different.
Fsport grill only fits fsport bumper. Regular grill only fits regular bumper. They are not interchangeable. This goes for 2014-2016 Lexus IS models
@@specONE Are they not the same size grills? Also, would you be able to post a video on how to remove the front badge?
They may look the same but they are not the same. the front badge I am unsure how to take off. I am sure it is probably self explanatory once you get to the rear of the grill where the emblem attaches
To replace the grill, is it pretty intuitive once you have front bumper removed or is there a way to remove grill without taking whole bumper off?
You will have to remove the bumper off the vehicle to reach some of the screws that hold the grill to the bumper
Do I need to remove bumper to replace the grill? can you make video on how to? Please!
Yes you will need to remove bumper to change the grill out. I explain what needs to be done how to remove grill . It's a lot of time to remove the grill. Its self explanatory once bumper is off
I damaged my lower section of the fsport grill. Since its two pieces is jt possible to replace this without removing the bumper?
Bumper is gonna have to come off unfortunately
@@specONE I was hoping you wouldn't say that. Ok, thanks for the reply.
Dear I have one front right side LED not working what you think the issue if I want to replace I will remove all bumper!!!?
Yes you must remove bumper to get the LED check light out. It I mounted at the rear of bumper
Hi if I have a 2014 Lexus IS 250 base model & want to upgrade the grill to look like a sport (which is how yours looks) , will I just need to buy a new grill to replace it? Or will I need to buy a whole new front bumper and grill?
You would need to buy whole new bumper and the grill to get this look. the front bumper grill opening between base and the Fsport is different
Hi! Do we need to remove the bumper like this to switch the grille?
Yes bumper needs to be removed to take grill off
Thanks for the video do you have one of how to replace the grill
could i ask what are the bumper stays you are talking about? thanks
How can I remove the front emblem all the videos I watch shows that it has 6 screws but mine only has a clip and two rubber things stopping it from coming out
You have to snap the clips to get it off the grill
Have you ever had the check headlight system light pop up on this car? Need help trying to fix it.
My car just did it today. It only shows up at night though.
Sorry I have never had that light come up. Do you have coilovers or lowering springs installed ? I would maybe check the height sensors for the headlights system that is attached to suspension if it has been touched before
Thanks for the video. Do you know how to change the headlight? I have a 2014 Lexus is250 and one of my headlights was broken. I'm sure I need to take out the front bumper before I can change it. But I don't know how to do it after that. Do you have any advice?
Yeah you will have to take the front bumper off, if you can get the bumper off you should be able to see the bolts holding the headlamp into place at that point. Should be about three or four 10mm bolts for each headlight
Seems as if putting the bumper on is harder than taking it off. When going to screw back in the 10mm screws, nothing lines up. Like the liner on the bottom, bumper, and the hole the screw is supposed to go into. Any help?
Sorry think of any pointers besides having a friend help align it into place
What kinda of headlight housing is that?
Thanks for the clear concise video. I am having a little trouble with a base is250 headlight. It goes on a bit less bright and then goes out a few seconds later. 1. Is it hid? 2. If so does it sound like a ballast?
You're welcome. I think in your situation it might be a bad bulb. I would replace that first before looking at the ballast. A bulb would be cheaper to replace than that ballast anyways
Sucks you can’t get to the headlight bulb without removing the bumper right?
Bro question regarding the drl is it the same for 2017?that 2016 gonna fit for 2017 bumper?thank you
no the DRL for 2016 would be different than 2017. The bumpers changed in 2017 IS model
Hello, great video My right side DRL is having internal condensation problem. I have to remove the front bumper in order to repair/replace it, right?
Yup, the Bumper has to be removed in order to get the DRL off the car.
Thanks for the advice on using electrical tape on the fender
Not Electrical tape! Its blue masking painter's tape.
Hey Rodney thank you so much. I need to take my bumper off,to fix my DRLs due to some oxidation or whatever is wrong with them. Gonna sand em and all that. This video helped alot. When putting it back on, it's just the top part and side that need to click back on right?
Just where the fender meets the bumper where it needs to "click" back into place. But make sure the bottom portion of the bumper is in place, that's the area to watch out for when reinstalling. The tricky part
How do you remove the connectors for the LED light strips on the bumper? It seems extremely tight to unclip the connectors.
yes it is tight so it doesnt come loose by accident. You need to press the release tab harder or use a pick or small screw driver to help lift up the release tab.
Hey Where did you purchase your headlights ?
From Japan, I actually traded with the japan owner for my US spec headlights at the time.
Check Yahoo.jp Auctions for used set or ebay sometimes as well. Good Luck!
Hey bro I was meaning to ask will that 2014 3rd gen bumper fit on on 2008 is250???
No it won't. The two cars are two different generations so body parts aren't shared. You can find aftermarket companies making bumper for older IS to make it look like the newer one.
Hi any idea about the 2015 GS f sport grill / bumper can be replaced with 2016/2017 model ?
+Maher B I don't have a GS model so I can't comment on that
Hey man, could you tell me what brand is the wheels and size please? Im looking to get some for my
Car. Thanks!
The wheels are Work Emotion CR2P
Thanks for the video. Informative. Get some old military wool blankets to put on the ground to protect the bumper paint. Theyre good and strong so they will survive light work with no problems. Maybe $15-20 at a surplus store.
Thanks for the suggestion, I will definitely have to look into those for future projects
Just got my car back from a body shop and it has a worst gap then yours any idea of how I can fix it ?
bring back to bodyshop and make them fix it
*hey man btw do you know if the front end of the 2017/2018 year Lexus can be switched with the 2015/16 model? like the hood bumper headlights and fenders?*
It's doable, not easy task though. Read through this thread on club Lexus forum for more details. www.clublexus.com/forums/is-3rd-gen-2014-present/871635-retro-fit-2017-f-sport-to-2014-f-sport.html
Hood and fenders are the same. Only headlights and bumper need to be swapped. Hardest part is the wiring change out to support new headlamps. There are CANbus wires running to the new configuration that is not on the headlight harness of the 14-16 year models
specONE *oh ok, i'm gonna stick with the 2017 model then.*
Hi. When you pull the bumper off, it sounds like it clicks off something. What is it?
It is the sound of clips releasing itself
@@specONE thanks mate
did you replace the entire bumper? or how did you fix the clips
Was never able to get rid of the gap. I caulk it up to guide tabs under the headlights missing/broken probably causing the sag and the gaps where the fender and bumper meet up
I like how you did, seems like you're a professional at doing this, I have a Is300 fsport and the driver side light in the bumper is condensate how can I fix that, any suggestions?
Donald
You can try taking out the turn signal light bulb and let it try to air out with like a blow dryer. But there is chance that there is a crack on the housing and it will keep happening.
testing-public.carmd.com/Tsb/Download/107084/L-SB-0002-15
Hey Man...quick question...will 2017 tail lights fit a 2015 model??
Yes it will fit and swap over. They are interchangeable
@@specONE u got a link on where 2 get em?
I have the same bumper problem with my '18 IS, did you happen to record the repair as well? Can you also list the part numbers needed?
never actually figured it out. My assumption is that maybe some alignment tabs on the bottom of the headlight snapped off so it allows the bumper to sag a a bit and thus the ugly gap between the fender and bumper
@@specONE Looks like I'll be taking it to the shop then haha hope it's a cheap fix. Thanks for the reply!
Thanks for the Video! Can you confirm that the DRL (Daytime Running Lights), shaped like the Nike logo, can only be replaced after you remove the bumper? My right side DRL is out. I don't think it's a fuse because I believe a blown fuse would cause both sides to go out. Thanks! -Hank
Yes those DRL can only come off after the bumper is removed from the vehicle
I'm also having the same problem I got the same foglights as you the dealer wants to charge me like $525 they blame the foglights for the daylight running light out but they are seperate wiring and everything
@danny, not sure how to help you have the OEM JDM ones ? who installed them? where was wire tapped? for the Day time rnning lights out, is it out during the day or only out when headlights are on?
What size wheel/ rubber are you running? Where did you get your side skirts?
All the specs of my car can be found here www.clublexus.com/forums/build-threads/740133-specone-build-thread.html
How you replace the grill top part?
Does the bumper need to be removed to install new headlight assembly I have one that’s condensating
Yes the bumper absolutely needs to come off to replace the headlight. This is generally the case for majority of the cars out on the road.
Helpful for installing new DRLs thank you!
Hi bro have replace 2014 lexus is250 f sport headlights ? If so can you upload the video thanks you
once the bumper is off, its pretty self explanatory what else is needed to take the headlamp off. 3 more 10mm bolts holding each headlamp in place
@@specONE hi Rodney
The headlights bulbs
Can't replace headlights bulb in a fsport LED headlamp. The whole headlights has to be replaced
Oh ok thanks bro
How do you Deal with the sonar sensors? They look like they attach to my front bumper
I didn't have any sonar sensors on bumper so can't comment on how to get around them. Not sure how they are connected via wire harness
Can you fit an f sport bumper on a base model?
Yes you can, you will need the full bumper and Grill as well.
Does the bumper from the Is F sport fits the Base Is?
Yes it does. people have done the conversion.
which wheels are you using? offset?
Where did you get those headlights at??!
I got them from Japan
Thanks Rodney, great video. one of my Nike lights not working, the cable been chewed by a small animal, hoping i can repair it myself.
Can u do one for taking out just the grill?
The grill is very hard to remove from the bumper, need to first take the bumper off, then undo some phillip screws and release a lot of plastic retaining clips all at the same time for it to pop out of the bumper
I love you thank you soooooo muchhhh how do you change the head lights?
Please do the head lamp changing video of is
Wassup bro, any video on how to disassemble headlights? For removal of lens for etching
Sorry I dont have any video of disassembly of the headlights. Too scared myself to do that
Nice job man !!! I wonder if the 2013 Lexus ls600 is similar 🧐
Do you have a video on how to install the fog lights? Nice videos!
sorry I wish i do. I installed my fog lights years ago already....
I heard some cars actually have wiring in the car, just need to get the switch on steering column replaced with one with foglight switch. Search the Clublexus forum for more details
depending on the fog light. I know for the JDMtoys fog light you just have to turn the wheel and remove the three front bumper tabs. It will provide enough space to work with. This method will only work if you are tapping on the existing rdl wires.
Michael it looks like that's the path I'll be taking. Have you seen anyone tried to fit the new IS bumper? I feel it has a more aggressive styling, what are your thoughts?
you mean the 2017 model? As for me, i purchase my car at the end of 2016 so i had an opportunity to get the 2016 or 2017 model. I really like the 2016 model haha. I like the front of the 2016 and rear of the 2017 model haha
Oscar Nieto to do the new bumper you gotta do the new headlights as well. Wiring harness for the headlights also changed
Mine has a camera would I need to get reprogrammed if unplugged?
Technically, you probably need to recalibrate if you pull the bumper off and you have radar cruise control feature
@@specONE yes I do and what about if I unhook the battery first? So technically it won’t detect that it’s unplugged ?
It's not about it detecting it's unplugged, it's that it has moved slightly when you unmount bumper and mount back up. It may have moved millimetres but it moved and the system will assume it's still in original position and system will use those sensor data but it will be slightly wrong. Can you get away with it? Maybe but it's not going to be perfect
@@specONE thank you for reaching out! I’ll see where I could get it reprogrammed at maybe the dealership? Or body shops have “adas” guys that do it?
@@bird_chill_412 yeah you are looking for a re-calibration, Bodyshop probably a good place to start.
What wheels are those? I love them
The wheels are Work Emotions CR2p
@@specONE thank you! I have the same car and color and it’s been hard trying to find wheels that look right with the color
Thank you! You make it seem easy enough to take it off. Was it harder to put it back on?
Going back on is opposite of removal. Just a tad harder because you have to make sure it's all lined up before clipping it back into place
Rodney Au I just bought a cpo 17 nx - just noticed that it has a huge gap on the left bumper. Should I be worried whether there was any work/damage on the bumper before or is this common to see in Lexus and just a quick fix that the dealer or a mechanic can do?
Do you think you can do a video on removing the front fender?
Probably not sorry. There has to be purpose for me to do in order to make a video while I'm at it.
Hey do you know of anyone who’s put an F-sport grille on the base model? I needed to change out the bumper due to an accident so this video is going to help alot thanks man!
you would need to swap the whole bumper and not just the grill, ebay.to/2FXIec2
The fsport grill will not fit a base model bumper
here's a good forum post on Club Lexus from years back, its a good read. www.clublexus.com/forums/is-3rd-gen-2014-present/860542-noobierices-bumper-removal-guide-and-base-model-to-f-sport-conversion.html
Nice do you know what is the Bulb Size for the headlights
If you have dual projectors like I have, they are LED and cannot be changed. It's all in one unit and if a headlight goes out, the whole headlight has to be replaced
specONE thank bro I do have the same as yours
You Can't change the bulbs then.
How to remove Impact bar lexus is 300 the wire
Sorry I dont know, never had to remove it.
can you do fender removal please on the same car model?
Lol man, that is not a shop training car, that's his car man....fender swop. I guess if you don't ask.....
My bro i have Lc500 and im thinking to pint the grill so i have to remove all bumper 🤦♂️
hopefully this video was helpful. Should be similar process for all Lexus models.
Is there any difference with 2017 RX350?thank you
I would not have a clue. Never taken one of those apart before
Can you please do a video of how to replace the headlight bulbs .(low beam)
If you have dual LED projectors that looks like mines, you can't. The whole headlamp has to be replaced if there is something wrong. The expective life of LED should outlast ownership of car. Sounds like something got wet inside maybe if only one headlamp stopped working. I would also check for fuses to make sure they are not blown.
specONE i have the “IS 300h” (2014) The left low beam starts to flicker and some times doesn’t work but i don’t get any warning light on the dash board. I have to switch the lights on and off to stop the flickering. And it’s only the left headlight. (I assumed it needs changing)
specONE the IS 300h that i have has the D4S HIDs
Oh I see. Sorry I am not familiar with the HID headlights of the 3rd Gen Lexus to be able to help.
Can you make a video about installing your fog light?
Fog lights already installed on my car so I wouldn't want to redo it on this one.
I may in the near future help someone else also with a 3IS install fog lights on their car and will try to record how to do it. Stay tune for that.
specONE ok thx
ua-cam.com/video/qD4lpDxo7YQ/v-deo.html
Can 2017 rx 350 f sport grill fit in non f sport?
I think it's possible to swap, would do some research on clublexus.com forums. I don't know alot about Lexus RX model
@@specONE ok thanks
How did u get ur headlight all white??
I swapped them forJDM headlights
Can I replace my non-fsport grille with fsport grille is250 2015?
No not a direct swap, the entire bumper needs to be changed also
@@specONEwould you give me some info, because my front bumper is to be replaced by the dealership, and I ordered an f sport grill, they told me they ordered the wrong bumper because the fog lights are a bit off. I assume it's an f sport bumper and I'd be happy with that bumper instead. What would I need to do to modify the fog lights to fit?
@@bboypez sounds like it is the Fsport bumper then if the standard fog lights don't fit. You gotta get Fsport bumper specific fog lights for the Fsport bumper
@@bboypez you can't reused your fog lights.
You can go with aftermarket
Winjet ebay.to/2CBTAyR
Or
JDM OEM replica (Spyder) ebay.to/2BgFL9x
@@specONE awesome and once you change those fog light parts out its plug and play?
I need to replace a low beam headlight can you show us how?
If you have dual LED projectors that looks like mines, you can't. The whole headlamp has to be replaced if there is something wrong. The expective life of LED should outlast ownership of car. Sounds like something got wet inside maybe if only one headlamp stopped working. I would also check for fuses to make sure they are not blown.
do you know any website that sells a new/used headlamp for cheap? water gets inside mine so its made the LED projector light turn off on mine but turn signal light still works.
@@limon917 eBay is a good place ebay.to/2NrnuL5
Can you make a video how to replace the headlights ??? Please help me out having trouble doing it my self
+carlos mendoza I could in future if I ever have to take my headlight out again. But it wouldn't be anything soon. It's not something I would want to really of just for a video. What trouble are you having?
specONE Thanks for the reply, well I’m having trouble replacing headlight bulb on the driver side. I don’t have no clue how to get to it.
+carlos mendoza do you have HID or LED headlights? LED you can't change a bulb, if it don't work, whole headlight housing needs to be replaced, send me message with picture of your headlight and I can tell which headlight version you have. Please also subscribe to my channel. Thanks
specONE I have 2015 Lexus is250 sport
specONE is just like yours
Hi. Would you help me to estimate repair Costs if i send you photo of front damaged car. Just Finger in the air.
Does this bumpe have sensor?
Fsport bumpers from 2014 do not have sensors.. If there are sensors, its recommended calibration for the radar parking sensors if bumper is removed and reinstalled (something that cant be done DIY)
Hello where can i buy these headlights from
I did a trade with someone in Japan for my headlamps.
Dude I like the wheels you have on the car what brand and model wheels please let me know
Carlos Torres thanks, they are Work Emotion CR2P wheels
Can you do a video of opening the headlights itself?
Not interested in doing that sorry. They are extremely hard to open I heard . Only professionals should handle it
Awesome video. Thank you. Where did you get your side spoilers? They look really nice.
Thanks, the side skirts are original by Skipper Japan.
Here is replica copy of them they sell on ebay
rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338108305&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sop%3D12%26_osacat%3D0%26_odkw%3Dcarbon%2Bfiber%2B2014%2Bside%2Bskirt%2Bis350%2Bstyle%26_from%3DR40%26_from%3DR40%26_trksid%3Dp2334524.m570.l1313.TR0.TRC0.H0.XCARKING%2BFit%2B14-16%2BLexus%2BIS%2BJDM%2BStyle%2BSide%2BSkirts%2B.TRS1%26_nkw%3DCARKING%2BFit%2B14-16%2BLexus%2BIS%2BJDM%2BStyle%2BSide%2BSkirts%2B%26_sacat%3D0
I don't like how the side skirts comes in pieces instead of one whole piece. Is the line that connects the pieces noticeable? From close up? Far away?
The cutoff of the two pieces of the sideskirts is right where the front and back door meets in the middle. Is that line noticeable? They designed it in such a way at least some thought was put into it.
Hi, may I know where is the hood up sensor?
+Saw Lwin you should find a two wire plug going to the hood latch , that is the sensor that tells car the hood is open
specONE Thabks you. I will try to unplug and see whether it can reset pop up alarm.
+Saw Lwin what is wrong with yours? How come you want to unplug it for?
specONE I hit something in front. And now there is a warning message "pop up hood erro". I'm trying to reset it myself before I drive in to service centre.
Bro can u put a IS F front grill to IS non F?
No you can't
Ohh because i didn’t buy the f sport but i like the grill from that one !
Rodney Auy ohhh man😓
You'll have to replace the whole bumper to fsport model one also if you want the fsport grill
Nice rims. What are they?
Work Emotions CR2p
Good job is the 2017 ES 350 comes off same way
Great video fire wheels too!
Thanks, Much appreciate!
is this much different than a 2is?
Should be very similar steps.
Nice demonstration. What did you do to tighten the gap between the bumper and the fender?
Never got rid of the gap. Will look into it when I have more time.
It’s lowkey cheap and weird design. I removed my bumper to do my fog lights and now theres a gap