I'm surprised there isn't a resin printed support being produced to do this with one of the many different USB-C receptacles available. Seems it would allow for a much cleaner installation with much less cutting if one was designed right. I love the idea of USB-C charging my old PSP though, especially if a LiPo battery mod is done.
Thank you s turorial n to. Pero for me lng maiwasan sna ung umbok n wire kung dinirect n ung wire mula s connector n usb c papuntang board. Pra s usb c board nlng mgssolder. Pero thank you tlga s tutorial n to. Nakita qo dn spaces for improvement. Ngcheck dn aq s market ng ibat ibang usb c female n my proper cover for more stable usb c socket.
I suggest in some better tools if you can. Made me cringe a few times, especially with the finger nail clippers. Less is more 😊 Also this is only for charging the psp. The vcc and data lines weren't used.
Yeah would make way more sense to allow data transfer too. The question is: how fast would the PSP charge? Is there a risk to charge with too much current and damage it? I would like to try this mod (with the upper connector tho) but want to make sure it's safe (also - this would charge a 4000 mAh battery that I have installed using other tutorials)
I already saw one of your videos for PSP console… can i ask you to do one video where you are replacing psp joystick drift with the one from ps-vita or nintendo switch drift…
Hey brother can i just use the other usb ports in your link to minimize soldering and cutting to fit? The usb c port 1 linked already has the wiring and seems smaller.
@@boibudgetmeal thanks, I don’t have many of the supplies you have but, could I use a pair of scissors to cut the wire and scrape until I see the copper wire instead?
Sir @BoiBudgetMeal exact link nung battery mo sa PSP BatteryMod. iba naman kasi yung size nung nasa link mo sa post eh. Nag order ako nung nasa link mo kaso makapal sya hindi na masara yung UMD door kaya pinakaen kunalang sa aso ko yung battery. Sayang pera ko patay pa aso ko bwiset ka mali yung link mo.
DO NOT solder the charging wires together like. Please use heat shrink as well…. ALSO do NOT use those two screws to hold in that chip. PLEASE just use a hot glue gun in this situation. Nice tutorial but a pretty rigged process.
Thanks for the tip but that hot glue wont hold the multiple plugging in and out of the usb-c. Believe me, I tried. Heat shrink tubing was used in the final product, hit was just not available during recording.
![Type-C Charging Port Mod For PSP 1000 [ Solderless ]](http://i.ytimg.com/vi/XVT2RHyB1Do/mqdefault.jpg)
This is exactly the kind of mod I was looking to do and it seems like we have the same sort of tools lol. Saving this one for sure
Your blade skills make me quite uncomfortable 😅
Me too. Lol
Other related videos:
PSP Battery Mod: ua-cam.com/video/eODxcqIguIk/v-deo.html
PSP Type C Mod: ua-cam.com/video/4GQyTRQ7p6k/v-deo.htmlsi=AFmxDv_plFceAo_k
PSP Screen Repair: ua-cam.com/video/uSI5S2fPGpg/v-deo.htmlsi=KUXM2s7cWNaWF2BJ
PSP 3000 Analog Repair: ua-cam.com/video/chqxA-oljQs/v-deo.htmlsi=qFcdgQGD12UGf8hv
PSP 2000 Analog Repair: ua-cam.com/video/NsEb_fcKEYU/v-deo.htmlsi=2ogVQjAapk03T6su
Power Button Repair: ua-cam.com/video/8iyHAPnLO4U/v-deo.htmlsi=IwUZrlcp5xPr1MQg
UMD Removal Tutorial: ua-cam.com/video/BLi5f--u5w4/v-deo.htmlsi=Yl4rl93d3YjVYveG
PSP Disassmbly: ua-cam.com/video/4Vf-87275ys/v-deo.htmlsi=Wkwhs07xFUSY0YSb
PSP Housing Replacement: ua-cam.com/video/nNO1XdZdI6c/v-deo.htmlsi=gYTSPTVwLEdpZiUc
I'm surprised there isn't a resin printed support being produced to do this with one of the many different USB-C receptacles available. Seems it would allow for a much cleaner installation with much less cutting if one was designed right.
I love the idea of USB-C charging my old PSP though, especially if a LiPo battery mod is done.
at 3:35 I was afraid of your thumb xD
Thank you s turorial n to. Pero for me lng maiwasan sna ung umbok n wire kung dinirect n ung wire mula s connector n usb c papuntang board. Pra s usb c board nlng mgssolder. Pero thank you tlga s tutorial n to. Nakita qo dn spaces for improvement. Ngcheck dn aq s market ng ibat ibang usb c female n my proper cover for more stable usb c socket.
i also want to do this procedure, but I can't stop thinking if I can do it
I suggest in some better tools if you can. Made me cringe a few times, especially with the finger nail clippers. Less is more 😊
Also this is only for charging the psp. The vcc and data lines weren't used.
Yeah would make way more sense to allow data transfer too. The question is: how fast would the PSP charge? Is there a risk to charge with too much current and damage it? I would like to try this mod (with the upper connector tho) but want to make sure it's safe (also - this would charge a 4000 mAh battery that I have installed using other tutorials)
will it still connect to pc?
Interesting.
I might do the job properly though.
Like watching a toddler build a nuclear reacter using a potato masher and a spoon.
I already saw one of your videos for PSP console… can i ask you to do one video where you are replacing psp joystick drift with the one from ps-vita or nintendo switch drift…
If i can get my hands into one if those, i will surely make one.
3:38 NONONONO OH MY GOD BE CARREFUL
So with this mod i could use any USB-C charger? like the Steam Deck one or the one that came with my phone?
Yes
Any 5V 2A USB charger will be okay
pretty ghetto.. but you work with what ya got right?
Hey brother can i just use the other usb ports in your link to minimize soldering and cutting to fit? The usb c port 1 linked already has the wiring and seems smaller.
Yes brother.
boss matanong ko lang yung psp ko unresponsive yung L1 BUTTON ano kaayng sira?
Flex. Check mo yung description. Andun yung link ng flex.
where can i get the tools
Check the description
Same everything for the psp 1000?
almost the same.
Can psp 2000 series use this?
The one in the video is psp 2000
@@boibudgetmealthank you
Works in 3000 too same way right?
Yes
@@boibudgetmeal thanks, I don’t have many of the supplies you have but, could I use a pair of scissors to cut the wire and scrape until I see the copper wire instead?
Yes! Just be careful with the scissor to avoid unwanted cuts
Sir pahelp naman po sa corrupted data file ng iso sa psp pag nagddownload po di mabasa
Download ng bagong iso
sir ask ko lng san kaya pwede bumili lcd ng psp 3000
Dito: shope.ee/AUQUStPZmi
psp repair shop po ba kayo? gusto ko sanang restore old psp ko
Free lance lang po. Ano issue?
Psp phat po rehousing.
@@ljnecesito keri naman. 500 labor. Bili ka sa shopee ng housing he he he he
Sir @BoiBudgetMeal exact link nung battery mo sa PSP BatteryMod.
iba naman kasi yung size nung nasa link mo sa post eh. Nag order ako nung nasa link mo kaso makapal sya hindi na masara yung UMD door kaya pinakaen kunalang sa aso ko yung battery. Sayang pera ko patay pa aso ko bwiset ka mali yung link mo.
Tanga. Wa ha ha ha ha
Sir tutorial po sa repair ng bricked psp 🙏
Anyare bago mag bricked?
@@boibudgetmeal pag nag oopen ng games sir bigla nag sshutdown then di na siya nag oon after pero may power po yung lcd at working ang battery
@@dwinsiree3536 feeling ko new memory stick lang. ganyan din kasi akin noon e.
Bossing pa mod ako psp nang katulad sayo :) nag chat ako sa FB page mo
Panis Brad...
Rusty razor no gloves
i love your videos.
DO NOT solder the charging wires together like. Please use heat shrink as well…. ALSO do NOT use those two screws to hold in that chip. PLEASE just use a hot glue gun in this situation. Nice tutorial but a pretty rigged process.
Thanks for the tip but that hot glue wont hold the multiple plugging in and out of the usb-c. Believe me, I tried. Heat shrink tubing was used in the final product, hit was just not available during recording.
He can do what ever way he feels he wants to