Fkkk yeah bro🤘 that dbxl is a beast and a half💪, I can't wait to see it with the new castle setup and some high mph runs😎. Much love and respect from Australia 🇦🇺
Thats what im talking about we did a speed test on cement it was a high of 48 thought it should go faster than what it came stock but thanks to you we can make it faster awesome video
Would it be ok if I kept everything stock and changed the mount and pinion to 24t and everything work fine , or would it be a long term issue? I definitely like the concept of not having to change anything out and keeping it stock. Wit those speeds I wouldn’t worry with changing the motor or esc
I finally hit 62 mph with my dbxl-e 2.0. 18t/46t. I think it will go faster with a longer run. I'm also going to order a 22t pinion and see how that goes with the 46t spur. If that's turns out to be a little much, I have a 48t spur. I run the xlx2/1100kv combo.
@@chrismagallanes8858 I have 3 different ones I use. SMC 9700 mah 120c 4s, HRB 9500 mah 120c 4s and I have a set of the gens ace 11,000 mah 100c 4s. I suggest the smc's or the hrb's. The gens ace are way too big for the tray, I wish I hadn't of bought them.
@@zagertRC It did hit 66 mph with a 22/48 on grass. I'm thinking the gearing is a little steep and not allowing the motor to get up to full speed plus mine weighs about 40 lbs with the batteries and upgrades I've done. I know you don't want to get hit by that at speed because you'll feel it in the morning.
I ordered the motor mount through you link and a few pinion gears. I do a 19, 21, 24 pinion. I have fans on stock motor and stock esc, I run the car in a smaller area not looking for top speed. Will I over heat on 24t pinion running 8s? Thanks
Does he make a mount that doesn’t require drilling out a bigger hole for the drive cup to fit for the version 2 Dbxl e or is this pretty much standard in order for this to fit?
@user-lf6mn3po1l yeah I still have it. I stopped at 96mph. But I recently hit 113mph offroad with my saw blade limitless. I have to edit the video still
@@pfunk72 It was the first time I used my SMC SRD batteries in this truck as well. I have all my pb's on these batteries. I would highly suggest owning a DBXL-E, it's an amazing RC!
Xmaxx is super slow out of the box in my opinion. I own both and love both, but the Losi I would definitely choose over the xmaxx. They're both very durable, but parts for the xmaxx are cheaper. Owning both is the best answer 🤣👍
Thank you! I had Lucid RC fans on my motor in the video, but I wasn't even running them. I usually don't run a fan speed running. Also unfortunately the owner hasn't made any fans for months and no stock has been available.
Love your energy bro. You make me laugh especially when throwing the jelly 😂😂😂😂 i wanted to ask did you blow the esc on 24t, cogging issues ? My dbxl e runs cool on 18t so was thinking to go to 23t or 24t, whats your thought or experience?
@@zagertRC when your esc was cutting out was it the gearing that was the issue?. I want to be able to bash as well as speed don't want to change pinion mid bash, do you think 22t be a sweet spot?
@@anime4idiots A small change in teeth is a big change with these gears. I think a 20t pinion would be plenty. Or you could buy a smaller spur gear and keep the 18t. They have 48 and 46 spur gears. Otherwise change out the ESC and really get some more power!😆👍
@@zagertRC Cheers mate, I did have the XLX2 but had problems so had to go back to stock for now till i get max4 esc and motor which is like 1100$!! Keep up great vids thanks for the advice
Nice, especially with the weight of that Rc and those tires, 70 is freaking awesome 😎
Yeah I was super happy with the results 😁👍
Thats the fastest stock losi speed ive seen. I look forward to the following vids broseph
Faster off-road, that on-road.. Thats interresting😂😂
Batteries make all the difference! Also it was a cold morning and i didn't take the time to warm up the lipos.
I'm learning a lot. Thank you.
You're welcome, thanks for the support 😁👍
Thanks for the links, I ordered through them.
70 is amazing for offroad! Congrats!
Thank you! I already broke that, and the video will be up soon 😁
@@zagertRC nice!
Can’t wait for
The motor and esc upgrades wow
Build video should be up in the next week 💪
@@zagertRC we all wish it was sooner lol keep it up bro
Fkkk yeah bro🤘 that dbxl is a beast and a half💪, I can't wait to see it with the new castle setup and some high mph runs😎. Much love and respect from Australia 🇦🇺
Thank you! Much appreciated 😁👍
Thats what im talking about we did a speed test on cement it was a high of 48 thought it should go faster than what it came stock but thanks to you we can make it faster awesome video
Thanks😁👍
That's fast AF for a 31lb car I just bought one myself and love it already ordered the vitavon diffs and a 23t pinion
Very nice! I just ordered Vitavon diff housings for my Limitless 💪 You're gonna love the truck!
I have this same motor mount from the fella out of Brazil. Super sick build bro
Thanks! It's pushing a lot more power now a days😁🤘
@@zagertRC where are you from if I may ask? I'm in Canada lol
@markamd1 Denver, Colorado. USA. I talk all the time to another rc guy up in Canada lol🤘
@@zagertRC Colorado is an amazing state! I've never been, but one day! lol cheers brother 🤙🙌
Think this will be my next car, love it
It's definitely one of my favorites, it's a absolute beast!
Would it be ok if I kept everything stock and changed the mount and pinion to 24t and everything work fine , or would it be a long term issue? I definitely like the concept of not having to change anything out and keeping it stock. Wit those speeds I wouldn’t worry with changing the motor or esc
You really only can do a few runs before you have to give it a break from heat. If you want to bash all day at these speeds 12s is the way to go
@@zagertRCcould I keep 24t pinion and go XLX2 motor and esc and be ok?
This was an awesome video man ! I just bought my losi dbxl-e of a buddy of mine and I'm going to do something crazy 🤪 with it !
Thank you! And you'll definitely enjoy it🤘
I'm building mine into a 24s build only if I get my funds on time.
Reaper from Drop a gear and disappear rc that's me !
By the way are you using the 50t spur ????
@@reapersrcperformance8835 yes in this video. Otherwise I have a 48 or 46 now.
A lot of work !
Can a max 5 esc handle a 24 tooth pinion on a 800kv motor.
I only own one Hobbywing max 5, and I never really pushed it. I think it would do okay.
Great RUN!
Thank you!
I finally hit 62 mph with my dbxl-e 2.0. 18t/46t. I think it will go faster with a longer run. I'm also going to order a 22t pinion and see how that goes with the 46t spur. If that's turns out to be a little much, I have a 48t spur. I run the xlx2/1100kv combo.
That's the same combo I'm putting in mine 💪
On what battery
@@chrismagallanes8858 I have 3 different ones I use. SMC 9700 mah 120c 4s, HRB 9500 mah 120c 4s and I have a set of the gens ace 11,000 mah 100c 4s. I suggest the smc's or the hrb's. The gens ace are way too big for the tray, I wish I hadn't of bought them.
@@zagertRC It did hit 66 mph with a 22/48 on grass. I'm thinking the gearing is a little steep and not allowing the motor to get up to full speed plus mine weighs about 40 lbs with the batteries and upgrades I've done. I know you don't want to get hit by that at speed because you'll feel it in the morning.
@@Blueknight1960 Very nice. That's not bad on stock ESC 💪💪💪
I ordered the motor mount through you link and a few pinion gears. I do a 19, 21, 24 pinion. I have fans on stock motor and stock esc, I run the car in a smaller area not looking for top speed. Will I over heat on 24t pinion running 8s?
Thanks
how do you stop the skeeter from catching wind and wanting to wheelie?
In my later videos I hit 90mph+ and had to zip tie my front shocks to keep the front down low and back shocks set high.
Awesome 70mph 🔥👍✌️
Thank you!
Stock spektrum system is a beast
Yeah it always surprised me!
Question, how long do you charge your batteries? For the DBXL
Just depends on charger and mah. Rule of thumb is charge one Amp per 1000 mah on the battery. Usually takes 30 minutes on 8000mah batteries.
From your expertise, could I go with a 18t pinion and keep everything stock? Your input would be greatly appreciated!
Will a heat gun work well for loosening those screws?
Probably, a torch just makes quick and easy work of it👍
@@zagertRC ok thanks for that i only have a heat gun and having trouble loosening the screws on the motor mount. Picking up a torch tomorrow thanks✌🏿
Does he make a mount that doesn’t require drilling out a bigger hole for the drive cup to fit for the version 2 Dbxl e or is this pretty much standard in order for this to fit?
No issues with the drive cup. Just have to drill one mounting hole for most strength.
@@zagertRCI seen in your video where you had to use a dremel to make the whole larger. Is this standard for all his mounts. I just ordered one
@user-lf6mn3po1l Oh sorry it's been so long. I did have to dremel out for room for the drive cup 😅👍
@@zagertRCdo you still have your Dbxl-e and have you hit 100mph yet?
@user-lf6mn3po1l yeah I still have it. I stopped at 96mph. But I recently hit 113mph offroad with my saw blade limitless. I have to edit the video still
Do you have a spool in the rear differental.
No. I don't run any spools on my Losi yet.
That's a big ole long scar!!
It's already healed!😆
Is that the stock spektrum system
Yes everything electronics is stock
@@zagertRCman 70mph just by up grading the pinion that's nice. I just got a kraton 8s exb and now I want a a dbxl-e lol.
@@pfunk72 It was the first time I used my SMC SRD batteries in this truck as well. I have all my pb's on these batteries. I would highly suggest owning a DBXL-E, it's an amazing RC!
Do you think it was a temporary voltage drop that cut out the esc?
Possibly, my speed run batteries are getting old 👍
I have 23t pinion whit the a factory motor mount 🤷
what kind of speeds are you getting with the 23T pinion? Are all the electronics stock on your Losi?
WoooW very nice amigo 🤟🏽😎🤟🏽
Thank you!
Which one should I go for between X-maxx vs Losi 2.0 DBXLE?
My requirement is should be fun and speedy and durable
Xmaxx is super slow out of the box in my opinion. I own both and love both, but the Losi I would definitely choose over the xmaxx. They're both very durable, but parts for the xmaxx are cheaper. Owning both is the best answer 🤣👍
@@zagertRC lol
What fan motor are u running on the spektrum motor? Awesome video
Thank you! I had Lucid RC fans on my motor in the video, but I wasn't even running them. I usually don't run a fan speed running. Also unfortunately the owner hasn't made any fans for months and no stock has been available.
@Zagert heck yea. Awesome thank you brother
@@Get2Diggin Yep! No problem, I have a lot of people ask about the fans. If they come back in stock I'll try and let everyone know💪
@Zagert thanks brother. Made a couple vids with my notorious, just ordered the dbxl e 2.0 and a 18t pinion. So def. Been watching ur vids on it
@@Get2Diggin Awesome! I need to rebuild mine. Hit a tree after hitting 94mph off-road😅
I need this guys weed… I’m not nearly this excited about anything anymore. I’m jelly . Sweet truck btw
🤣🤣👍 Thanks!
What device do you use to know the speed of your dbxl? do you have a web link please?
Skyrc GNSS. It's the best out there!
SKYRC SK-500023 GNSS Performance Analyzer GSM020 GPS + GLONASS a.co/d/b8suHKu
@@zagertRC Oh yes! Thank you sir! 🤝😊👍
@@claudedechamplain535 you're welcome!
Awesome video , thanks man …
Of course, thank you! Be sure to check out the more recent upgrades. This truck is up to 94mph off-road 👍
@@zagertRC wow that’s insane off-road speed….
Did ya ever get him in the back of the foot? He was looking
No🤣 I couldn't do that to him!
Where can I get that mount
www.ebay.com/itm/Losi-DBXL-E-Desert-Motor-Mount-for-Large-Pinions-/133338052211?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@@zagertRC Hi when I click on the link to the Losi V1 motor mount nothing shows up do you have an actual part number for it?
Darn i cant wait to get one
And throw in a max4 in that rig😁
This trucks the best! And a Max4 would be Beast in it🤙
my friend can you do me a favor?can you measure the diameter of the spur gear and tell me how much it is?thanks
Link to spreadsheet?
Make that beast 12s bro
Love your energy bro. You make me laugh especially when throwing the jelly 😂😂😂😂 i wanted to ask did you blow the esc on 24t, cogging issues ? My dbxl e runs cool on 18t so was thinking to go to 23t or 24t, whats your thought or experience?
Yeah it definitely starts to cogg after running a few minutes with the bigger pinions, but it can handle it for a few speed runs.
@@zagertRC when your esc was cutting out was it the gearing that was the issue?. I want to be able to bash as well as speed don't want to change pinion mid bash, do you think 22t be a sweet spot?
@@anime4idiots A small change in teeth is a big change with these gears. I think a 20t pinion would be plenty. Or you could buy a smaller spur gear and keep the 18t. They have 48 and 46 spur gears. Otherwise change out the ESC and really get some more power!😆👍
@@zagertRC Cheers mate, I did have the XLX2 but had problems so had to go back to stock for now till i get max4 esc and motor which is like 1100$!! Keep up great vids thanks for the advice
@@anime4idiots No problem! I had xlx2 problems in this car as well, I've been considering 12s flier ESC 😅
Mph= milinar
Sean speak
milanour!!
Shes fast
I wanna join offroad speed club
Just just join on Facebook and the admin will approve 💪
🤙🤙🤙🤙🤙
Take that dremel away. Nothing is safe.
😆👍