How to Replace Rear Upper Control Arm 2011-2021 Jeep Grand Cherokee

Поділитися
Вставка
  • Опубліковано 25 сер 2024
  • Buy Now!
    New Control Arm from 1AAuto.com 1aau.to/ia/1ASR...
    This video shows you how to install new control arms in your 2011-2021 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
    This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2011 Jeep Grand Cherokee
    2012 Jeep Grand Cherokee
    2013 Jeep Grand Cherokee
    2014 Jeep Grand Cherokee
    2015 Jeep Grand Cherokee
    2016 Jeep Grand Cherokee
    2017 Jeep Grand Cherokee
    2018 Jeep Grand Cherokee
    2019 Jeep Grand Cherokee
    2020 Jeep Grand Cherokee
    2021 Jeep Grand Cherokee
    Tools you will need:
    • 15mm Wrench 1aau.to/oaey/1A...
    • 18mm Wrench
    • 19mm Wrench 1aau.to/oaey/1A...
    • 15mm Socket 1aau.to/ocbo/1A...
    • 18mm Socket
    • 19mm Socket
    • 22mm Socket 1aau.to/otU/1AX...
    • Trim Tool Set 1aau.to/oazE/1A...
    • 1/2 Inch Impact Gun 1aau.to/oyZ/1AX...
    • 3/8 Inch Impact Gun
    • Ratchet 1aau.to/occt/1A...
    • Gloves 1aau.to/obbY/1A...
    • Safety Glasses
    • Floor Jack 1aau.to/oaz3/1A...
    • Jack Stands 1aau.to/oamQ/1A...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 2

  • @TRQ
    @TRQ  3 місяці тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @mygiguser
    @mygiguser 3 місяці тому

    how to replace the carrier that holds the axle in place?