I really appreciate the comment. I had to make sure each step was in the video which hopefully I didn't miss any lol. I appreciate you for checking out the video.
Added to my watchlater for when i order my ALP at the end of the month. Thanks man! This doesn't seem so hard, i thought it would be a royal pain in the arse lol. Also i was digging that back to the future table til the budget version of doc spoke... and utterly shattered my nostalgia.
I got a lot of request for this so here it goes lol. I know everyone in this group doesn't need this but you know how I do lol. This is a video for anyone that does not know how to connect a PC to their Atgames Legends Pinball to run FX3, Pinball Emporium, Baller Etc. I just wanted to make it for all the novices out there that don't really get the help needed.
First thank you for taking the time to help people who may not know how to do this. You stated in the video that if anyone needed help to email you. Your email is not in the videos description so how do I go about sending you a email. Thanks for the help.
I greatly appreciate your down to earth presentation of how this setup works. I am just waiting on my VIBS board so I can start having fun :) One thing I am a little confused about still is how the controls work when you connect the pc. I don't have the added on joystick with buttons (yet). I wasn't sure also, what the USB cord was doing in the connections. Thanks again for a great video!
Sorry for the late reply. Thanks for checking out the video and I try to help others when I can. You can use the usb or the Bluetooth connection if needed.
@@MadDadsGaming Hello Sir, I just installed the VIBS board. Was curious how you routed the hdmi cable from the inside of the cab to going out of the cab? Did you just leave the back panel off?
Great stuff, definitely saving this video for when my VIBS come in later this month. I probably skipped over it, but do you get haptics playing OTG? I've read "fixes" like making sure the volume is up on the local Gottlieb tables before switching to OTG but none of that works for me. I'm on the latest AtGames firmware and get no haptics in FX3 or Steam Zaccaria. Thanks again, subbed 😎
seems like even cabinet mode doesn't perfectly go top down on the screen like the natively built tables? you still see some of the cabinet edge on the upper part. Kinda bugs me I like the perfect top down look of the tables built into the cabinets.
Here is the board you need to connect it? Thanks for the checking out the video. www.atgames.us/products/video-input-backglass-switchboard-for-legends-pinball
Yes it does, its just tricky trying to figure out the settings for it when doing to joy2key setup. If you don't have the control panel I have both setups now for joy2key.
Great vid.. do you have one of the parts/part #s and where to get if I was to build a machine exactly like that? Or should I just email? You said your dmd was wider so I don't know if you added on or is that Legends stock. New to all of this, thx
Thanks for checking out the video. If you build one yourself then you can just use monitors for it. If you get the Legends Pinball then there is only a dmd in the backglass not a stand alone one unless you want to make it.
Great video, when I try to follow wagerers tech talk tutorial I can not seem to get the joytokey to work??? Would you have a guide or some direction on how to set it up?
I need your assistance so I used a display port from my laptop to the Rachael board and the HDMI on the legends to HDMI on my laptop because it didn't have two HDMI ports. Anyway so I got everything working the only problem I'm having is that the dot matrix is shown but the backlass imagine for the game isn't shown. How do I fix this? Thanks!
Hi, my screen is all black and I cant see my Pinball FX on Epic games. I'm using the HDMI & USB but when I click launch on pinball FX app it stays on a black screen and nothing appears I think the game crashes
I got one yesterday and the front of the unit vibrated real bad from the sound. It mad a loud popping sound when a game loaded. Now the speaker is blown.
I will try to do that for everyone. I do have the video settings up the gamer pro that has all the setup in that as well if you want to check that out for the time being.
Great video man! Question.. I am using an Dell optiplex 3020 and will add a gtx 970 video card to it. Do you know if I need to upgrade the power supply to 500w? Thx !
@@MadDadsGaming thx I am actually thinking of trying the gt-1030 as this is low profile for small form factor PCs and it sounds like the stock Power supply should handle it!
I saw a video stating I couldn’t get cabinet mode for the legends pinball bc it’s competing against the arcade 1up? Is this true? Bc I know you have to email them to get the cabinet mode code and send them a photo of your table.
Yes I wasn't going to put it on the alp I was just going to use it on my tv I had on a vertical mount which is what i sent a picture to them, but then my tv went out so i tried it and it worked so just saying.
Help. I have tried to hook up FX3 with joytokey, doesn't work.i used different usb cables, doesn't work. tried powered usb, doesn't work. I tries different HDMI cables, doesn't work. Screens work fine, but the only way to play it is to use my computer keyboard. I tried to use the Xbox controller settings, doesn't recognize it, doesn't work. I have tried plugging usb into different ports, doesn't work. Help please, it looks so easy on your video
Hey MadDadsGaming. I had a quick question. I have a data usb transfer cable but for some reason the cabinet/ pinball machine won't show up as an xbox 360 controller. How do I get around that so I can use my pinball buttons on Pinbal FX3.
Well it won't work with a data transfer cable it has to be a usb to usb cable for it to work. If you need more help please email me. Thanks for checking out the video.
My pinball machine sucks. Can’t hook up to internet. Only have had it for 3 days and of those 3 days I spent 3 days trying to figure the 💩 out. Buyer beware this company is shady. They do not ship out any of the parts you order nor do they send out any of the game packs you buy. I am about to make my machine into firewood
The game packs are in your digital locker on the system you have to redeem through the system itself. Sorry your having issues but people are always here to help including me.
@@MadDadsGaming only have sent 5 emails and nothing. Well they did send me one email and said I needed to complete my order when I had already paid for it and it shows on TV e invoice I paid for it. Plus it shows on my capital one card account I paid for it.
This was GREAT!!! You filled in a lot of steps others have not. Will definitely do this when I get my ALP.
I really appreciate the comment. I had to make sure each step was in the video which hopefully I didn't miss any lol. I appreciate you for checking out the video.
Love the walk in intro… my man just strolling in from the guest bedroom - dropping VIBS knowledge on the world.
Lol I was trying to be cool and funny. I appreciate you checking out the video as well. It means alot.
Added to my watchlater for when i order my ALP at the end of the month. Thanks man! This doesn't seem so hard, i thought it would be a royal pain in the arse lol.
Also i was digging that back to the future table til the budget version of doc spoke... and utterly shattered my nostalgia.
Thanks man, I appreciate you. Yeah sorry that it killed your nostalgia.
@@MadDadsGaming do you have to have the VIBS board to connect to pc? Just got alp over the weekend and bought a pretty good computer tower.
@@SHOTAMAN77 yes if you want the backglass to work. I appreciate you checking out the video.
@@MadDadsGaming OK thank you I'll order it today. Thanks for the fast response
@@SHOTAMAN77 no problem
I got a lot of request for this so here it goes lol. I know everyone in this group doesn't need this but you know how I do lol.
This is a video for anyone that does not know how to connect a PC to their Atgames Legends Pinball to run FX3, Pinball Emporium, Baller Etc.
I just wanted to make it for all the novices out there that don't really get the help needed.
First thank you for taking the time to help people who may not know how to do this. You stated in the video that if anyone needed help to email you. Your email is not in the videos description so how do I go about sending you a email. Thanks for the help.
@@briangleitz3601 sorry about that its in the about section of my channel. Here it is Maddadsgaming@gmail.com thanks for checking out the video.
This was a well needed video. We all assume people know how to do this because we do. Great job.
Thanks man. I appreciate you for watching half of the video as always lol. Jk i appreciate you
I greatly appreciate your down to earth presentation of how this setup works. I am just waiting on my VIBS board so I can start having fun :) One thing I am a little confused about still is how the controls work when you connect the pc. I don't have the added on joystick with buttons (yet). I wasn't sure also, what the USB cord was doing in the connections. Thanks again for a great video!
Sorry for the late reply. Thanks for checking out the video and I try to help others when I can. You can use the usb or the Bluetooth connection if needed.
@@MadDadsGaming Hello Sir, I just installed the VIBS board. Was curious how you routed the hdmi cable from the inside of the cab to going out of the cab? Did you just leave the back panel off?
Appreciate all you do for the community! Good stuff!
Thanks man I appreciate you as well.
This is exactly what I need maddads .. now I just need a PC and Bobby Vu’s back box. Thank you
No problem Al, I appreciate you man for checking out the video.
Is the backbox still available? I can't seem to find one :(
What's up Bro, awesome video for newbies! I just picked up mine and will be hitting you up for some setup advice. I appreciate you!
Sounds great man I appreciate you.
Awesome. You just earned a new sub.
I appreciate it and for you checking out the video.
Thanks for the video! Nice job!
No problem. Im always here if you need anything and I appreciate the comment.
Thanks again for another great tutorial
Thanks man for checking it out and the comment.
Awesome! Love the shirt too!
Thanks man been going for awhile now. I appreciate you.
U got the Hook up brotha..!!😎👌✔
Thanks man i appreciate you
Great video! Thank you so much. I may email ya if i have any issues with my pc setup
Awesome job, sir!
Thank you and sorry for the late message. You can email me anytime and again thanks for checking out the video and the comment.
As a noob, I understood the following.. plug cables into stuff, activate my casio calculator to install stuff, magic smoke happens, start playing... 😀
Dang guess i didn't do a good enough good explaining it. If you need anything just email me though. I appreciate you for checking out the video.
Thanks for the video!
No problem and thanks for checking out the video.
Awesome, thanks!
No problem man. I appreciate you for checking out the video.
Thank you!
No problem hopefully this helped you.
Thank you for sharing
Thanks man i appreciate you
Great video!!!
Thanks PK. I appreciate you taking the time to check out the video. It means a lot.
Lets get it!
Thanks Billy I know you know how to do this already lol
Great stuff, definitely saving this video for when my VIBS come in later this month. I probably skipped over it, but do you get haptics playing OTG? I've read "fixes" like making sure the volume is up on the local Gottlieb tables before switching to OTG but none of that works for me. I'm on the latest AtGames firmware and get no haptics in FX3 or Steam Zaccaria. Thanks again, subbed 😎
Thanks for the sub. It has a little but not much. You basically would have to upgrade the haptics to feel it like you want though. I appreciate you
seems like even cabinet mode doesn't perfectly go top down on the screen like the natively built tables? you still see some of the cabinet edge on the upper part. Kinda bugs me I like the perfect top down look of the tables built into the cabinets.
Yeah its not perfect but its ok for people who can't afford the real one though. I appreciate you checking out the video.
What is that board called again to hook up my PC to get the other screen (second screen) working?
Here is the board you need to connect it? Thanks for the checking out the video. www.atgames.us/products/video-input-backglass-switchboard-for-legends-pinball
Great vid! Does the plunger work when you use the pc?
Yes it does, its just tricky trying to figure out the settings for it when doing to joy2key setup. If you don't have the control panel I have both setups now for joy2key.
@@MadDadsGaming thanks bro! I'll hit you up if I run into any problems. Appreciate it!
@@IamLegend32 no problem man.
Great vid.. do you have one of the parts/part #s and where to get if I was to build a machine exactly like that? Or should I just email? You said your dmd was wider so I don't know if you added on or is that Legends stock. New to all of this, thx
Thanks for checking out the video. If you build one yourself then you can just use monitors for it. If you get the Legends Pinball then there is only a dmd in the backglass not a stand alone one unless you want to make it.
I have a 1 hdmi , 1 mini display port, a usb 3.0, and a standard usb how would u setup the vibs and laptop 👍???
You can if you like but you have to have at least one out to go to the board and then one going to the alp itself. Thanks for checking out the video.
Would a Asus Rog Ally be abke to handme the PC portion well?
I shouldn't be a problem. Thanks for checking out the video.
Great video, when I try to follow wagerers tech talk tutorial I can not seem to get the joytokey to work??? Would you have a guide or some direction on how to set it up?
Thanks, I will try to see if i can make a video of just joy2key settings. I can also take a picture of my settings just email me if you like
I need your assistance so I used a display port from my laptop to the Rachael board and the HDMI on the legends to HDMI on my laptop because it didn't have two HDMI ports. Anyway so I got everything working the only problem I'm having is that the dot matrix is shown but the backlass imagine for the game isn't shown. How do I fix this? Thanks!
You have to add the backglass image's to the steam folder. Emails me if you need more help. I appreciate you for checking out the video.
Hi, my screen is all black and I cant see my Pinball FX on Epic games. I'm using the HDMI & USB but when I click launch on pinball FX app it stays on a black screen and nothing appears I think the game crashes
Are you talking about the backglass or the main screen. Thanks for checking out the video as well.
I got one yesterday and the front of the unit vibrated real bad from the sound. It mad a loud popping sound when a game loaded. Now the speaker is blown.
Dang man, sorry to hear that. I hope they get you taken care. Thanks for checking out the video.
Can’t get my alp stock buttons. to work with steam. Doesent recognize it ????
You have to use joy2key to get it to recognize the buttons. I hope this helps. Look at my gamer pro video.
Do you have a video for setting up the FX3
I will try to do that for everyone. I do have the video settings up the gamer pro that has all the setup in that as well if you want to check that out for the time being.
Great video man! Question.. I am using an Dell optiplex 3020 and will add a gtx 970 video card to it. Do you know if I need to upgrade the power supply to 500w? Thx !
Yes to do need to upgrade the power supply. Thanks for the comment as well.
@@MadDadsGaming thx I am actually thinking of trying the gt-1030 as this is low profile for small form factor PCs and it sounds like the stock Power supply should handle it!
@@retrogamerchris1413 It will handle it no problem I have that one in one of mine.
@@MadDadsGaming thx man, also I really enjoy your vids!! Great for the community
I saw a video stating I couldn’t get cabinet mode for the legends pinball bc it’s competing against the arcade 1up? Is this true? Bc I know you have to email them to get the cabinet mode code and send them a photo of your table.
Yes I wasn't going to put it on the alp I was just going to use it on my tv I had on a vertical mount which is what i sent a picture to them, but then my tv went out so i tried it and it worked so just saying.
Do you need the VIBS board to control the second screen ?
Yes if you want to use fx3 and others in cabinet mode. If you just want the playfield you don't need it.
Help. I have tried to hook up FX3 with joytokey, doesn't work.i used different usb cables, doesn't work. tried powered usb, doesn't work. I tries different HDMI cables, doesn't work. Screens work fine, but the only way to play it is to use my computer keyboard. I tried to use the Xbox controller settings, doesn't recognize it, doesn't work. I have tried plugging usb into different ports, doesn't work. Help please, it looks so easy on your video
Just email me at maddadsgaming@gmail.com and We can talk about it.
anyway to do this on a macbook pro with bootcamp?
Yes you can do it with windows on it no problem
So you need a code to set this up on the back Glass?
Yes you do if your trying to setup cabinet mode on fx3. You just have to get it from zen themselves. Thanks for checking out the video.
@@MadDadsGaming ok I have an unlocked steam set up. Does that make a difference?
@@teeflez It should but you just have to check to see if you have cabinet mode in fx3 is all.
@@MadDadsGaming ok I do
AtGames or 1up????
I like both do to the moding capabilities
Hey MadDadsGaming. I had a quick question. I have a data usb transfer cable but for some reason the cabinet/ pinball machine won't show up as an xbox 360 controller. How do I get around that so I can use my pinball buttons on Pinbal FX3.
Well it won't work with a data transfer cable it has to be a usb to usb cable for it to work. If you need more help please email me. Thanks for checking out the video.
Did you ever figure it out? I'm having the same issue. I'm using a USB 3.0 A to USB 3.0 A.
Can you pm me about FX3?
Just email me and we can talk about it.
@@MadDadsGaming I am new. How do I get your email?
@@ericbanes873 its Maddadsgaming@gmail.com.
My pinball machine sucks. Can’t hook up to internet. Only have had it for 3 days and of those 3 days I spent 3 days trying to figure the 💩 out. Buyer beware this company is shady. They do not ship out any of the parts you order nor do they send out any of the game packs you buy. I am about to make my machine into firewood
The game packs are in your digital locker on the system you have to redeem through the system itself. Sorry your having issues but people are always here to help including me.
@@MadDadsGaming nope nothing in locker to redeem. They were kind enough to take my money though.
@@tennesseefallsforests2730 damn have you contacted them?
@@MadDadsGaming only have sent 5 emails and nothing. Well they did send me one email and said I needed to complete my order when I had already paid for it and it shows on TV e invoice I paid for it. Plus it shows on my capital one card account I paid for it.
Great video!
Thank you and I appreciate you for checking it out.