Delta PLC Simulator and Factory IO connection

Everyone I see on youtube is running factory io with a real plc. I show you how to do it with COMMGR simulator WITHOUT a real plc.
I shared similar subjects in my blog. You can translate it by using the translate widget on the left side.
erolcum.blogspot.com/2023/05/...
Programs used in video :
Download free softwares ISPSoft 3.17 and COMMGR 1.14 from :
downloadcenter.deltaww.com/en...
www.ptc.com/en/products/kepwa...
factoryio.com/download-archive/
www.hw-group.com/software/her...
This site can calculate LRC in modbus ascii packet if you want :
www.metools.info/encoding/ecod...

[@shabnalp.m4440]

Thanks for the explanation. In my case it's working only with the internal memory bit. If I use a bit like X0 or X1 it's not working.
I noticed that "client access" in the tag section changes to read only mode.

[@mohamadjavadarab6114]

In delta PLC simulation, you cant change the value of inputs. because of that you have to use internal Memories instead of inputs. It's different from Siemens simulation

[@sourabhraghuwanshi8299]

Thanks brother, it is working,

[@ertugrulbayhan]

Emeğinize sağlık

[@erolcum34]

Sizin gibi ilgili gençlere bu ülkenin ihtiyacı var, rica ederim

[@ertugrulbayhan]

@@erolcum34 hocam inanın ilgili gençlere sizden başka kimse bir harf bile öğretmiyo 4 aydır staj yeri aruyorum 😀😀😀 kimse almıyo

[@realdraxx2142]

In factory io, in the opc server drop-down menu nothing is showing

[@erolcum34]

your firewall or antivirus blocks port 10002 may be, I don’t know. You may try to give permission for this port in firewall

[@shorty52732]

Inside isp soft when i write a ladder turning an output on, the output doesnt turn on inside factory io nor does it change value from 0 to 1 inside of kepserver. What could i be doing wrong ?

[@erolcum34]

please watch the video carefully. Port number, address etc. anything may be the issue

[@MrMango-if8ye]

How do you know what address to put for tags in kepserverex?

[@erolcum34]

please watch carefully. it is shown in commgr settings second 44 of video

[@vishnuhu9086]

Why do we have to use the kepler software, is it possible to do it without it?

[@erolcum34]

it is a communication bridge between dvp simulator and factory io. so it is required.

[@vishnuhu9086]

@@erolcum34 Delta connects to kepler using modbus over ip. so why cant it do the same with factory io?

[@erolcum34]

delta uses modbus ascii protocol but factory io does not support this protocol

[@realdraxx2142]

Where can i find input/output address like 001281

[@erolcum34]

You need to find it from Delta documents. You can see it here : www.scribd.com/document/382276093/Modbus-Address-Table-Delta-Plc

[@realdraxx2142]

@@erolcum34 thanks man

[@teknology111]

WPLSOFT ile de oluyormu

[@erolcum34]

malesef hayır