been watching this channel for a long time now and never commented haha but I' currently working on an 05 rx8. Firt car i ever bought and owned and as much as it may be problems in the beginning aint nothing beats working on your own car and that feeling of accomplishment when you done.
Working on my b20 swapped civic wagon, I built my own turbo manifold for it and welded my own downpipe, intercooler piping etc... just got word from my tuner he’s available this weekend so excited
Super late comment lol, I just found this video for the first time, but I got a 95 Honda prelude, built H22, gt35 eBay turbo, full 3 in exhaust from the turbo back. Love the video.
I currently own a blue 90 Rx7 with a 13b REW swap with a few bolt ons Current things I'd like to fix 1. Fix idle problem 2. Install FMIC 3. Power windows
This winter I plan on completely restoring my ek coupe. Right now it's stripped to a bare chassis on jack stands and I'm going through and re doing all of my fuel lines with -6an stainless steel braided line ran through the cabin instead of underneath since I live in the Midwest and salt is a major issue. Also relocating my prop valve on the other side of the fire wall to give it that "tucked" look and to be able to run my brake lines in the cabin for same reasons. Re doing all suspension components with k tuned bushings and control arms and things of that nature. Oh I also forgot im in the process of re painting the engine bay tonight. Then during the summer I will be importing a jdm h23a(blue top) from an accord wagon sir to get completely re built with all OEM gaskets except for the intake manifold and throttle body gaskets, those will have hondata thermal gaskets to help with keeping the induction side cool since I'll be using my ported and polished intake manifold. As far as engine management goes I'll be running a Hondata s300 on a street tune on 93 octane. Also using dsm 450cc injectors.
Hey thanks for all the videos! i'll be street porting my FD starting this week. i know there are some videos about break down porting and rebuilding blocks buuuuut i was thinking if you did a video that focused on checking tolerances sizing the side seals what needs to be replaced and what can be salvaged during a rebuild. after several searches the best ones i found were by some AUS guys from years ago and also a couple in Japanese that were real cool but no subtitles. maybe you were planning on it or already have something like that and i missed it. anyway i like what you guys are doing and hope you continue to be successful.... more rotary content lol!
'90 Celica All-Trac Turbo with a Gen4 3S-GTE. Wrapping up a forged rebuild, looking to grab either a GTX3071R Gen II or that new G25-660 once everything is shaken down. My target ATM is only 400 all wheel, but I want room to grow without too much lag.
Nice, i always wanted all-trac, you don't see many toyota's being built unless its a 1j or 2j set up. Every1 is ripping out the engines and dropping k"s in em. Toyota's feel like the underdog's now (not including supra's). Just turbo'ed my 2zz on my 7th gen celi still working out the bugs.
Awesome, man. I also had a 7th Gen GT-S prior to going back in time to the All-Trac. I feel you on the whole Toyota underdog thing, I personally think that it's the trickle down effect from Toyota themselves focusing on the bottom dollar, and not really committing to their enthusiasts (they don't even make their own performance oriented cars by themselves anymore, for crying out loud...) Hard to be proud of something that the creators don't really seem to care for anymore. But I've digressed, what turbo kit are you running?
Yo bro found your channel that's what's up always like your comments on Facebook lol, about done working on 01 dc2 boosted, need a downpipe about he sane build as yours just not css, or coil set up is about the only difference but my poor was took 3 years to get it where it's at, oh and finally got a full suspension seats and wheels lol. Will keep watching, nice build again.
Do you know about rear camber adjustment for an FC? Some dude had his whole suspension set up and said the camber arm was a shitty and improper way to adjust the rear camber after you go dirt nasty low, but everyone else says that it's the way to go?
Throwing in a B18c into my 92 eg hatch this upcoming Monday. What you think about boosting the type r? I hear mixed reviews about doing it to a stock one. Great videos
working on my NA bridgeport fc3s with custom manifold and a k5 blazer im building up to tow the rx7 to race events trying to build it for autocross and road racing
Well I'm working on my 73 RX2 building an REW for it I'm in Florida but currently have a full bridgeport 12a on a 175 shot of nitrous dynoed 387hp in July and it already had 35k on the motor...
Working on a 500+whp Saab Viggen Motor, fully built. The big thing is this AWD/ Quattro 1987 Saab 900 SPG Project I plan it to be a track car/ hill climb car, 7-800 is the plan
cooliebwoy415 yes. I originally went B series because it was supposed to be a stock block, piston, rod, boost combo and morphed into a full blown racecar on the street. Had I started over it would be K.
When did you change the name and when was humble performance made into a channel and why all of a sudden the Honda stuff I'm into it for sure both ways as long as there is "motorsport" but just curious you seemed to be more of a rotary channel I guess hence the name but curious why now you are doing more stuff and havnt just had it all from the begging?
What a 500hp Civic with a 4 rotor engine the Honda Civic man that's some dope car and 81 and half rotor with Forge Apex and that's gonna pull some crazy power I wonder what kind of transmission use in for the full rotor Civic you better pop vetec bro and you got your friend to put a fart can on it.Bro what can of shit now you dump your money into now you claiming you going to make 500 to 700 horsepower on a street car what does have snow tires do you have on the car now bro who you trying to play does Civic so light that just with 300 horsepower it's not even going to hook on the street especially with those tires you have now if you going to make 400 to 700 what kind of computer? do you have and how much pound of boost do you want to run it ?and also what kind of clutch that you using?And I want to know what kind of spring for the wastegate you using? You wasn't that clear about the injectors. Cuz when you were Florin The decelerator hot even heard the Turbo spoon not even the waist waste Gage sounded like it was choking anyways seems like you're spending a lot of times watching other built don't worry I going to get you back on line you don't got no countdown material I going to be your self conscious for now on 1first what you need to do is get a haircut 2 fix the damn glasses or buy one 3 take a shower bro you look like you just woke up and decided to do the a video 4You sent the drive shaft to get balanced and cut don't got nothing to do was very easy you say you got six lifters one dyno make a breakdown video of cars that are you working on now in the shop but don't show a bunch of cars at not even running 5 and I see they ask you a lot about what kind of computer to use rotors engine what kind different application 6 I see a lot of people riding ask you about question about problems to have what they cars what you could making video explaining how to fix it or are so greedy just wanted to go to your shop! 7 you said how you have a dyno in the shop show few cars on the dyno some bbr action fuck this I'm go to sleep!
Woot?!?! No hacked job like your "rotary mechanic friend"...shame shame. Otherwise nice welding job, clean and organized shop from what I can see on the video.
This is a honda channel with a sprinkle of rotors content .project poverty is the car that got all the subs .should make a second channel for that honda crap
Actually you're wrong lol. Project poverty is a very small percentage of our subs. If you'll look, last week we did purely rotary content and didn't get much of anything for views.
ROTORS and MOTORS oooo ok I get it, it's for views lol I'm messing with u bro I give like to all ur videos ,I'm biased lol project poverty is for budget racers that don't have any other channel to turn to on UA-cam at least I was under that impression,i didn't think views mattered as much as being a rotary purist but I'll still watch and give likes even if it's not rotary related just because I like u bro and u are very informative👌
u dont deserve ur channel to be called rotors change it to pistons..i subed to u for rotary's ..ill watch boosted boiz for hondas come on ur killing me smalls
What happened to "Car enthusiasts" where we all support each other? I was riding in a rotary before you were born, and I support Kenny. Fuck off mate. We don't want you around with that shitty attitude.
To get in contact with Derrick for fabrication work, hit him up on facebook here!
facebook.com/derrick.golden.9862
That weld porn.
BROTORS
Hi bro i just saw you vid. I would like a custom exhaust for a 2012 nissan altima. Any info would appreciate.
Thats cool you plugged your homie, way to pay it forward.
Hands crazy steady. He does good work
been watching this channel for a long time now and never commented haha but I' currently working on an 05 rx8. Firt car i ever bought and owned and as much as it may be problems in the beginning aint nothing beats working on your own car and that feeling of accomplishment when you done.
Working on my b20 swapped civic wagon, I built my own turbo manifold for it and welded my own downpipe, intercooler piping etc... just got word from my tuner he’s available this weekend so excited
ben papu Did you sleeve the block?
Lane Browning Nope, not gonna push it too hard I know the b20 sleeves are weaker than the b18s
Super late comment lol, I just found this video for the first time, but I got a 95 Honda prelude, built H22, gt35 eBay turbo, full 3 in exhaust from the turbo back. Love the video.
Sounds great. Is the muffler custom too? If not what kind of muffler is it?
I currently own a blue 90 Rx7 with a 13b REW swap with a few bolt ons
Current things I'd like to fix
1. Fix idle problem
2. Install FMIC
3. Power windows
Currently trying too work on my 86 FC. Love the channel keep up the good work
If Derrick saw my welds I'd probably get punched in the face lol
This winter I plan on completely restoring my ek coupe. Right now it's stripped to a bare chassis on jack stands and I'm going through and re doing all of my fuel lines with -6an stainless steel braided line ran through the cabin instead of underneath since I live in the Midwest and salt is a major issue. Also relocating my prop valve on the other side of the fire wall to give it that "tucked" look and to be able to run my brake lines in the cabin for same reasons. Re doing all suspension components with k tuned bushings and control arms and things of that nature. Oh I also forgot im in the process of re painting the engine bay tonight. Then during the summer I will be importing a jdm h23a(blue top) from an accord wagon sir to get completely re built with all OEM gaskets except for the intake manifold and throttle body gaskets, those will have hondata thermal gaskets to help with keeping the induction side cool since I'll be using my ported and polished intake manifold. As far as engine management goes I'll be running a Hondata s300 on a street tune on 93 octane. Also using dsm 450cc injectors.
Hey thanks for all the videos! i'll be street porting my FD starting this week. i know there are some videos about break down porting and rebuilding blocks buuuuut i was thinking if you did a video that focused on checking tolerances sizing the side seals what needs to be replaced and what can be salvaged during a rebuild. after several searches the best ones i found were by some AUS guys from years ago and also a couple in Japanese that were real cool but no subtitles. maybe you were planning on it or already have something like that and i missed it. anyway i like what you guys are doing and hope you continue to be successful.... more rotary content lol!
'90 Celica All-Trac Turbo with a Gen4 3S-GTE. Wrapping up a forged rebuild, looking to grab either a GTX3071R Gen II or that new G25-660 once everything is shaken down. My target ATM is only 400 all wheel, but I want room to grow without too much lag.
Nice, i always wanted all-trac, you don't see many toyota's being built unless its a 1j or 2j set up. Every1 is ripping out the engines and dropping k"s in em. Toyota's feel like the underdog's now (not including supra's). Just turbo'ed my 2zz on my 7th gen celi still working out the bugs.
Awesome, man. I also had a 7th Gen GT-S prior to going back in time to the All-Trac. I feel you on the whole Toyota underdog thing, I personally think that it's the trickle down effect from Toyota themselves focusing on the bottom dollar, and not really committing to their enthusiasts (they don't even make their own performance oriented cars by themselves anymore, for crying out loud...) Hard to be proud of something that the creators don't really seem to care for anymore. But I've digressed, what turbo kit are you running?
I just got a EG hatch today so i am hyped
Love this type of videos!
Looking to go bigger turbo setup on the FC. Running the stock for now while breaking in the rebuild.
Welding skills Godlike tier
Could you do a video on the limitations of the renesis based on its porting, specifically the exhaust ports and go in depth please?
Those were the cleanest welds i have ever seen.
Awesome vids! Been watching you for a while! Current projects are a 2012 gen coupe, 89 savana rx7, and 03 evo 8!
600hp 10thAe is what is in the works for me this winter
Fc3s king no balls you won't!
ROTORS lol I got pictures of it on brotors🤗
Yo bro found your channel that's what's up always like your comments on Facebook lol, about done working on 01 dc2 boosted, need a downpipe about he sane build as yours just not css, or coil set up is about the only difference but my poor was took 3 years to get it where it's at, oh and finally got a full suspension seats and wheels lol. Will keep watching, nice build again.
@ 3:59 reppin' that SPEEDFACTORY Hoodie. It's all good
I have a 1983 Celica GT Hatch that i'm working on right now. Has the original 22re and I want to keep it stock asside from lowering it.
beams with the 6 speed would be a fun project on it
n0ti5 that is an awesome idea. I would definitely consider it later on
Joshua D'Amato No change that shit out for a 20r
My civic is finally at the body shop now for body restoration, and I picked up a B20 🤘🏽
Do you know about rear camber adjustment for an FC? Some dude had his whole suspension set up and said the camber arm was a shitty and improper way to adjust the rear camber after you go dirt nasty low, but everyone else says that it's the way to go?
Throwing in a B18c into my 92 eg hatch this upcoming Monday. What you think about boosting the type r? I hear mixed reviews about doing it to a stock one. Great videos
85 rx7 that I want to turbo 2 swap. But things are expensive. So don't know if I should keep it or sell it .
working on my NA bridgeport fc3s with custom manifold and a k5 blazer im building up to tow the rx7 to race events trying to build it for autocross and road racing
What muffler are you using on your setup brotors
What kind of muffler do you have?
Well I'm working on my 73 RX2 building an REW for it I'm in Florida but currently have a full bridgeport 12a on a 175 shot of nitrous dynoed 387hp in July and it already had 35k on the motor...
359whp Dc integra did a fuel upgrade over the winter to cut weight and be able to turn it up need lsd and suspension and then hit the track
Second gen Speed3. Power to the fwd turbo 4 bangers!
I thought this was a rotary channel?
Then you obviously didn't watch the video posted recently where he spoke about branching out.
*facepalm*
promethbastard must have mist that one
renamed to rotors and motors lolol
ROTORS and MOTORS problem solved, lol! Does that mean I can ask about LS swaps now?
What exhaust muffler?
Have you ever herd of Gingium's t2 fc build.
The background song is lit.
I’ve been working on my awd swapped gst spyder, not a common thing
could someone please tell me the music title from 1:02 ? thank you in advance
Great job
I usually have my oil feed line tilted a bit on the snail
SHAMELESS PLUG
Do you think the Civic will beat Tj Hutchinson's super fast na is300?
Does anyone know what welder that is
Can he fabricate a buddyclub spec 2 exhaust on my d16 y7
I love the idea. But my idea of a sleeper would be putting a 3.5-inch thrush hush muffler on it, and it sounds stock.. just me, lol.
Nice sound
Awesome welding.
Working on a 500+whp Saab Viggen Motor, fully built.
The big thing is this AWD/ Quattro 1987 Saab 900 SPG Project I plan it to be a track car/ hill climb car, 7-800 is the plan
yes to honda love also!
Have you considered a k20 swap into that eg?
cooliebwoy415 yes. I originally went B series because it was supposed to be a stock block, piston, rod, boost combo and morphed into a full blown racecar on the street. Had I started over it would be K.
civic build +1
Does he do titanium?
Does it all
I have a ef hatch would love to make it a street sleeper bro really bad
Dooooope!
Welds look awsome. But need more brap :)
When did you change the name and when was humble performance made into a channel and why all of a sudden the Honda stuff I'm into it for sure both ways as long as there is "motorsport" but just curious you seemed to be more of a rotary channel I guess hence the name but curious why now you are doing more stuff and havnt just had it all from the begging?
Get itttttttttt
I have a clean , 1990 da9 Integra gs , revived it from the grave
GSXR-600 Bike Throttles on my 89’ Civic wagovan.
What a 500hp Civic with a 4 rotor engine the Honda Civic man that's some dope car and 81 and half rotor with Forge Apex and that's gonna pull some crazy power I wonder what kind of transmission use in for the full rotor Civic you better pop vetec bro and you got your friend to put a fart can on it.Bro what can of shit now you dump your money into now you claiming you going to make 500 to 700 horsepower on a street car what does have snow tires do you have on the car now bro who you trying to play does Civic so light that just with 300 horsepower it's not even going to hook on the street especially with those tires you have now if you going to make 400 to 700 what kind of computer? do you have and how much pound of boost do you want to run it ?and also what kind of clutch that you using?And I want to know what kind of spring for the wastegate you using? You wasn't that clear about the injectors. Cuz when you were Florin The decelerator hot even heard the Turbo spoon not even the waist waste Gage sounded like it was choking anyways seems like you're spending a lot of times watching other built don't worry I going to get you back on line you don't got no countdown material I going to be your self conscious for now on 1first what you need to do is get a haircut 2 fix the damn glasses or buy one 3 take a shower bro you look like you just woke up and decided to do the a video 4You sent the drive shaft to get balanced and cut don't got nothing to do was very easy you say you got six lifters one dyno make a breakdown video of cars that are you working on now in the shop but don't show a bunch of cars at not even running 5 and I see they ask you a lot about what kind of computer to use rotors engine what kind different application 6 I see a lot of people riding ask you about question about problems to have what they cars what you could making video explaining how to fix it or are so greedy just wanted to go to your shop! 7 you said how you have a dyno in the shop show few cars on the dyno some bbr action fuck this I'm go to sleep!
Ive got a few projects my first is a EG couple my second project is a convertible RX7 FC that's still in your name! Haha
a turbo miata is what im building motor is built and running na for now
Don't you make videos and work at humble now?
Building a 1979 datsun 280zx with a bored out 3 liter l28et
#1 gen rx7 body with a 3gen 13b single turbo looking for 650hp
Woot?!?! No hacked job like your "rotary mechanic friend"...shame shame. Otherwise nice welding job, clean and organized shop from what I can see on the video.
My 1st gen 1983 rx7
Just jdm b6ze swaped my miata
I love You!
Oh shit, I live in Omaha
95 eg coupe
Last
📸TheBordercivic979
This is a honda channel with a sprinkle of rotors content .project poverty is the car that got all the subs .should make a second channel for that honda crap
Actually you're wrong lol. Project poverty is a very small percentage of our subs. If you'll look, last week we did purely rotary content and didn't get much of anything for views.
ROTORS and MOTORS oooo ok I get it, it's for views lol I'm messing with u bro I give like to all ur videos ,I'm biased lol project poverty is for budget racers that don't have any other channel to turn to on UA-cam at least I was under that impression,i didn't think views mattered as much as being a rotary purist but I'll still watch and give likes even if it's not rotary related just because I like u bro and u are very informative👌
Project poverty #!!!!!!!!!!!
u dont deserve ur channel to be called rotors change it to pistons..i subed to u for rotary's ..ill watch boosted boiz for hondas come on ur killing me smalls
Sue me for making videos about the cars I love lol.
Where were you the last 3 videos? Don't come at me sideways with that bull.
ROTORS i was working in san jose getting that paper while u were trying to attempt to remove a tranny
Matthew Hurley i ready did lol
ROTORS u dont understand were im from rotaryheads and honda heads dont clash at all so i hate hondas with the passion
What happened to "Car enthusiasts" where we all support each other? I was riding in a rotary before you were born, and I support Kenny. Fuck off mate. We don't want you around with that shitty attitude.
Ricer.