How To Replace iPhone 6 Battery and LED Apple Logo Mod

Поділитися
Вставка
  • Опубліковано 2 чер 2016
  • DISCLAIMER: Proceed at your own risk. This video only serves to guide whoever dares to attempt it. I hold no responsibility to any damages caused by viewers attempting this.
    Me replacing my iPhone 6 battery and modding the LED for the Apple logo. Recorded on GoPro Hero4 Black at 1080p 30fps Narrow FOV.
    Equipment used:
    -iPhone 6
    -iPhone 6 Battery
    -iPhone 6 LED Apple Logo
    -Generic 40-bit Screwdriver Set
    -Pentalobe Screwdriver
    -#00 Philips Screwdriver
    -Tweezers
    -Electrical Tape
    -Thick Tape
    -Suction Cup
    -Pry Tools
    -Double Sided Tape
    -Scissors
    -Light
    -Brain
    SUBSCRIBE!!!
    / theferrarix5a
  • Наука та технологія

КОМЕНТАРІ • 29

  • @stephenchico2418
    @stephenchico2418 7 років тому +6

    This is the only video I have seen that properly shows how to use the "pull strip" adhesive. I pried a battery out and was thinking "wtf" why such a strong adhesive. Also was thinking why are these flimsy little tabs on the end of the battery. It all makes sense now.

    • @PholapatKoo
      @PholapatKoo  7 років тому +2

      Thanks Stephen!!! i tried my best explaining every little step :P

  • @rihanna9120
    @rihanna9120 2 роки тому

    *This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

  • @tedhe8673
    @tedhe8673 4 роки тому +1

    I LOVE THIS VIDEO! My battery capacity is at 65%, and I didn't want to risk it swelling but just found out the logo light mod! SUPER HELPFUL!

  • @robertking7584
    @robertking7584 6 років тому +1

    You should ALWAYS disconnect the battery before disconnecting the display assembly. Even powered off, there is voltage flowing through vcc_main which can result in a short while removing or reconnecting the display cables.

    • @PholapatKoo
      @PholapatKoo  6 років тому

      Yes you are correct, I wasn't as knowledgeable as am I right now so I noticed a few errors in my videos, thanks for commenting.

  • @robertcentinaje8791
    @robertcentinaje8791 3 роки тому

    How can I find a complete set or two of Pentalobe screws (all internal micro screws. I have all the tools.

  • @benerobertofficial2354
    @benerobertofficial2354 3 роки тому

    Where i can gets this logo Led Apple mod

  • @HarishVlogss
    @HarishVlogss 5 років тому

    hii.. what ever...! its some what difficult to do this process in home by our selvs... so can we take it to i store (show room) nd make it by the i workers...? Thank you..

  • @mayetsese1
    @mayetsese1 7 років тому +5

    hi i just tried this mod and mine did the top left screen had a fading dim as if power is being taken on that part how do i fix it help please... thanks

    • @PholapatKoo
      @PholapatKoo  7 років тому +2

      Hi, yes I have that effect too. I think it's normal but I see some people on UA-cam that don''t have it. I think it depends the power it takes from different qualities of LEDs. It's a minor problem, but I will try to get rid of it on my phone and probably make an update video on it. :)

    • @mayetsese1
      @mayetsese1 7 років тому +1

      I took it off and tried connecting again i dont know why but the led is not working anymore. So i didnt install

    • @PholapatKoo
      @PholapatKoo  7 років тому

      maybe the connection is not well (clean the connections with some alcohol) , be very careful and try again if u wish to do so

  • @burgermeistermarc4967
    @burgermeistermarc4967 7 років тому +2

    What is the link to this LED Apple Logo?
    Please give me the link to this Product!
    Thank you from Germany!

    • @PholapatKoo
      @PholapatKoo  7 років тому

      Hi, you're welcome!!! I found a link to a high quality LED kit, here is the link: theunlockr.com/product/iphone-light-kit-mod-iphone-6/

  • @kaur4801
    @kaur4801 5 років тому

    hello, can you help, cause i cant get the logo off , i have tried for 2 hours but still nothing :(

  • @Mateogibson
    @Mateogibson 7 років тому +1

    Hi PholapatDoes the lighting apple logo fits perfect in housing like the original one? I saw 10 videos where you can see that the logo didnt fit 100% in to a housing.Thank you

    • @PholapatKoo
      @PholapatKoo  7 років тому

      Hi Mateo, yes it fits perfectly flush with the housing, make sure u tell the seller the exact phone u have.

  • @niharranjanmahali8549
    @niharranjanmahali8549 4 роки тому

    Hei, from where you bought the apple led logo.

  • @sekharkasireddy3535
    @sekharkasireddy3535 6 років тому +1

    so does the screen turns on without putting those 5 screws on ribbon cables? I want to make sure screen works before put those screens..

    • @PholapatKoo
      @PholapatKoo  6 років тому

      Hi, yes the screen still works without the shield and the screws, but i wouldnt recommend because the display connectors are not secure and it can pop off without the shield and screws

  • @normalgamer1251
    @normalgamer1251 4 роки тому

    How i upgrade my 6plus camera

  • @voronoi7641
    @voronoi7641 6 років тому +2

    Were can i buy iphone 6 battery and screen?

    • @PholapatKoo
      @PholapatKoo  6 років тому

      I buy them from either ifixit.com or aliexpress, I recommend ifixit

  • @eyeyamjstn628
    @eyeyamjstn628 6 років тому +2

    I’m fuckin pissed because I’ve gone through 3 logos, they all have issues 2 won’t light up and the other one flickers. They’re from the unlocker as well.

    • @PholapatKoo
      @PholapatKoo  6 років тому

      I feel you man, maybe getting it from another source will be better?

  • @ayiarama4563
    @ayiarama4563 Рік тому

    Camer not proper direction