Bosch Tumble Dryer Handle Repair
Вставка
- Опубліковано 27 тра 2020
- Bosch WTE84308GB/17
If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co.uk/shop/bootsowen
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
Ecover laundry liquid: amzn.to/2Fl3Jqx
Calgon: amzn.to/33es6hL
Vacuum Cleaner: amzn.to/35lsAFr
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases. - Навчання та стиль
Thank you from Turkey. We fixed it with my daughter.. Good job.
Thank you! Just used this video to change the handle on my parents tumble dryer. I found that front panel can actually be pulled forward (a little like taking the lid off the front) to hold on to the broken plastic bits on the screws more easily with some pliers.
Excellent, well done
Thanks, mate. Very useful - and saved my marriage. All the best.
Typical helpful video from an Irish lad. Go Ireland!
Thanks. Very useful.
Great Video. I'll be following this in a few days. Have you any advice on how to open the door if the handle snapped off while the door was shut? Many thanks.
Can you do a Drying Race against Bosch Condenser Dryer Vs. Hotpoint Aquarious CTD00 Condenser Dryer?
I need to know how to get the lock out . Mine went bad
Hi There, Great Vid, I will be following this in a few days. Have you any advice on how to release the door if the handle snapped off while the door was shut? Many thanks. B
Just pull on the frame of the door.
@@bootsowen I have the same problem as Betty. If I pull on the door frame, the front half of the door separates from the rear half but the door doesn't open.
Hi do you know how to replace the lock part? Not the bit on the door. Thank you
No, but I could figure it out.
That should be straight forward. I’ve ordered a replacement lock part and handle. The panel where the screws are located splits open from the outer door. The new lock should easily fit in there.