I find many supposedly informative videos on youtube very annoying to watch. Not this... This is right up my alley. Sticking to facts, no annoying music, and presented precisely with a sense of humor (dairy products & captain OCD). Keep up the good work!
I know Im randomly asking but does any of you know a way to log back into an Instagram account..? I was stupid lost the account password. I would love any help you can give me.
@Brycen Emerson Thanks for your reply. I got to the site on google and im in the hacking process now. Looks like it's gonna take quite some time so I will get back to you later with my results.
THIS was superb! This is advice that is lost on the absolute beginner (as I was), but becomes apparent with experience. I don't decry people buying cheap stuff that doesn't work because, with the right mind, you can adapt it but it's no substitute for capable equipment. A bad workman blames his tools, but even a moderate workman can get good results with good tools and can only improve from there.
Great video, Paul! You are correct in having your moisture trap close to the airbrush. Condensation takes time to fall out of suspension in the air, and having a moisture trap only at the compressor allows that moisture to mostly bypass the trap, and go straight to your airbrush. My 2 gallon tank compressor is in the next room, and while it does have a factory installed trap at the tank, I have another trap/regulator/fitting assembly screwed to my workbench. The airbrush hose attaches to the fitting. When I'm done painting, I always get a lot more moisture out of the workbench trap than the tank trap. Thanks for making this video!
I have a pre-filter, regulator (0-30 gauge), then a final 5 micron filter. Mounted on my bench. I never get moisture in the final filter. Industrial supply houses carry them.
Ah, yes the days of TWO paint types... Today's hobbyist almost needs a graduate degree in chemistry AND application technology to grasp the options available. Excellent content - informative and entertaining all in one! Well done... AGAIN!!
When I was a lot younger the only model airbrushes available was a very difficult and not very good model from Revell, and air compressors were the purview of garages etc, air propellant cans were the only thing available, now with the passage of time the range of brushes and compressors are mind boggling, I have bought a middle of the road brush and compressor set that I am really wanting to use, but I guess I am a bit nervous of it and how to employ it properly, so this and other videos is helping build my base knowledge up to the point I can at least give it a go. My other worry is about paint selection, as again the range and types of paint are incredible but I am slowly becoming more informed and at least have the basic knowledge to buy the right ones for my preference and my bank balance. Thanks again for sharing your knowledge and expertise.
A set of very informative videos, thank you. Based on your comments I now own an IWATA Eclipse HP-CS. The dual action is very nice and easy to get used to. However I have a problem mixing my Humbrol enamel without having small lumps in it that clog the airbrush. I am using Humbrol thinners. It is really hard to tell when all the lumps have disappeared and so I would like to filter the paint as it is put in the cup . I see there are choices of filters and I wonder if you have a particular recommendation as to the best filter mesh size. Thank you
One question I was curious about, is how to paint flat or semi-gloss coats. You mention that if you are painting gloss on a car, it needs to maintain overlapping edges and a wet coat. Commonly, I've seen models sprayed early on with light mist coats, then slightly heavier to build up the color, and finally one last "wet coat". Is this the proper technique for flat or semi gloss paints as well?
I hope this is seen, and hopefully there's an answer. I have a Master mini compressor that holds up to 60psi, but when I just it for more than maybe an hour, it seems to get REALLY hot and won't spray over 18psi, for some reason. Hopefully, your are able to help?
Thanks Paul! After 4 years, still a great reference video and treasure trove of information.
I find many supposedly informative videos on youtube very annoying to watch. Not this... This is right up my alley. Sticking to facts, no annoying music, and presented precisely with a sense of humor (dairy products & captain OCD). Keep up the good work!
"... vague reference to dairy products." Priceless.
Another great, very informative video.
I know Im randomly asking but does any of you know a way to log back into an Instagram account..?
I was stupid lost the account password. I would love any help you can give me.
@Brycen Emerson Thanks for your reply. I got to the site on google and im in the hacking process now.
Looks like it's gonna take quite some time so I will get back to you later with my results.
@Brycen Emerson It worked and I finally got access to my account again. I'm so happy!
Thanks so much you saved my ass!
@Mayson Kade no problem xD
You’re an excellent teacher. Nice video.
This is liquid gold in my airbrush! Thank you! 😀
THIS was superb! This is advice that is lost on the absolute beginner (as I was), but becomes apparent with experience.
I don't decry people buying cheap stuff that doesn't work because, with the right mind, you can adapt it but it's no substitute for capable equipment.
A bad workman blames his tools, but even a moderate workman can get good results with good tools and can only improve from there.
By far the most informative, well put together and professionally delivered video on the subject of Airbrushing. Thanks.
I love your content, it's always fantastic wealth of information summed up succinctly.
Great video, Paul! You are correct in having your moisture trap close to the airbrush. Condensation takes time to fall out of suspension in the air, and having a moisture trap only at the compressor allows that moisture to mostly bypass the trap, and go straight to your airbrush. My 2 gallon tank compressor is in the next room, and while it does have a factory installed trap at the tank, I have another trap/regulator/fitting assembly screwed to my workbench. The airbrush hose attaches to the fitting. When I'm done painting, I always get a lot more moisture out of the workbench trap than the tank trap. Thanks for making this video!
Really? I may pick up a 2nd trap
I have a pre-filter, regulator (0-30 gauge), then a final 5 micron filter. Mounted on my bench. I never get moisture in the final filter.
Industrial supply houses carry them.
Ah, yes the days of TWO paint types... Today's hobbyist almost needs a graduate degree in chemistry AND application technology to grasp the options available.
Excellent content - informative and entertaining all in one! Well done... AGAIN!!
Straight honest answers.
very enjoyable and informative, Paul. I love the ideas and background theory stuff. Lots of ideas to steal for my own modelling.
Always full of helpful information, thanks Paul............... Mike.
So free with your extensive experience. Thank You sir!
When I was a lot younger the only model airbrushes available was a very difficult and not very good model from Revell, and air compressors were the purview of garages etc, air propellant cans were the only thing available, now with the passage of time the range of brushes and compressors are mind boggling, I have bought a middle of the road brush and compressor set that I am really wanting to use, but I guess I am a bit nervous of it and how to employ it properly, so this and other videos is helping build my base knowledge up to the point I can at least give it a go. My other worry is about paint selection, as again the range and types of paint are incredible but I am slowly becoming more informed and at least have the basic knowledge to buy the right ones for my preference and my bank balance. Thanks again for sharing your knowledge and expertise.
your videos are always helpful. Thank you for taking the time
Excellent practical advice, as usual.
Hi Paul. Your videos are great. I'd love to see you do a video where you apply your rigorous methods to acrylic paints like Vallejo.
Your channel is great.
Excellent advice
Paul is synonym for Madterclass!
Awesome video! Practice, practice, and more practice!
Very helpful do to the fact I am new at airbrushing. I have always been the rattle can type of guy.
Paul: Hold on captain, the most relevant measure is the amount and velocity of air passing by the needle.
The Captain: Are you... challenging me?
Excelente video Muchas Gracias por tus consejos nice day
Excellent video 👍
A set of very informative videos, thank you. Based on your comments I now own an IWATA Eclipse HP-CS. The dual action is very nice and easy to get used to. However I have a problem mixing my Humbrol enamel without having small lumps in it that clog the airbrush. I am using Humbrol thinners.
It is really hard to tell when all the lumps have disappeared and so I would like to filter the paint as it is put in the cup .
I see there are choices of filters and I wonder if you have a particular recommendation as to the best filter mesh size.
Thank you
One question I was curious about, is how to paint flat or semi-gloss coats. You mention that if you are painting gloss on a car, it needs to maintain overlapping edges and a wet coat.
Commonly, I've seen models sprayed early on with light mist coats, then slightly heavier to build up the color, and finally one last "wet coat". Is this the proper technique for flat or semi gloss paints as well?
...absolutely brilliant!
I hope this is seen, and hopefully there's an answer. I have a Master mini compressor that holds up to 60psi, but when I just it for more than maybe an hour, it seems to get REALLY hot and won't spray over 18psi, for some reason. Hopefully, your are able to help?
Tnx for a great video. What nozzle would you reccomend for dying larger areas? Let say 1x1 foot
great video! thankyou
I had to fit extra long hose from compressor to moisture trap to get rid of water fountain..
Just found your channel today and your content is really amazing. Would you ever consider painting some fantasy miniatures?
Informative and helpful video. Captain OCD, though!
LMFAO! 😂 🤣
I have had an air brush for a while and I'll admit I am still haven't got it.
Captain OCD! Lol