Sylvaniza ZEVO 1156 Brake bulb install in Mercedes GL class

Поділитися
Вставка
  • Опубліковано 31 лип 2017
  • DIY installation of Sylvania ZEVO LED bulbs in Mercedes-Benz GL Class (2013-2016).
    Amazon Affiliate Link: (You won't pay more but help me grow my channel)
    Sylvania 1156 LED bulbs: amzn.to/3jATbmA
    Need to make sure the bulb housing has reflectors in it. The LED bulbs point backwards into the housing and need reflectors to reflect the light off. Very bright and lights faster than incandescent bulbs.
    In another video, I show how to add resistors to remove the lamp-out message on the dash.
  • Авто та транспорт

КОМЕНТАРІ • 15

  • @user-zv2kr9bo9u
    @user-zv2kr9bo9u 5 місяців тому

    Thank you SO MUCH for this video! Changed both brake lights with no problems! God bless YOU!

  • @Lonnie91a
    @Lonnie91a 2 роки тому +1

    Yea that is correct. Always red led bulb behind red lens. It will be much brighter and deeper red that way. Putting the same brightness white LeD bulb will actually be dimmer.

  • @kingarchnyc
    @kingarchnyc 3 роки тому +2

    Screw the bulb! All I care is your watch! What is it? Looks very cool and interesting

    • @DIYDharma
      @DIYDharma  3 роки тому +1

      It is a SECTOR 550, Swiss Made. There are still a couple on ebay. Make sure you get the instructions - you'll need it. Here is a link for one of them: www.ebay.com/itm/SECTOR-550-CHRONO-ALARM-SAPPHIRE-CRYSTAL-MENS-WATCH-Swiss-Made-ETA-Movement/162258132672?hash=item25c7569ec0:g:cpYAAOSwB09YPwoF

  • @Lonnie91a
    @Lonnie91a 2 роки тому

    What if I have a Oem subwoofer in that rear spot? Can I still access the bulbs?

  • @typer272727
    @typer272727 6 років тому +1

    You should get the leds from vleds.com they have the ones corrects that problem

  • @hmarkmacha6261
    @hmarkmacha6261 2 роки тому

    Have you made the video to show the resistor installation? Thanks.

    • @mants2368
      @mants2368 2 роки тому

      hi, I made an update to that with the resistor. here is the link: ua-cam.com/video/UqJQDb_2vdw/v-deo.html . hope this helps on the installation of the resistor.

  • @brodywinslow1820
    @brodywinslow1820 Рік тому

    You don't even show a before and after or how it looks at night

    • @toyotabrony
      @toyotabrony Рік тому

      He did. If u notice his son was braking so it’s similar of before and after

  • @noahgaray7923
    @noahgaray7923 4 роки тому

    These bulbs suck ass

    • @toyotabrony
      @toyotabrony Рік тому

      Not really. U get what u paid for. It may not be super bright, but with red led, it increase the brightness with the red lens.
      If u want the best ones. Go for 1: Lasfit red led bulbs. Or 2: GTR Lighting - Carbide series 2.0 or armor series. More expensive, but the quality is better. 😊

    • @DIYDharma
      @DIYDharma  11 місяців тому +1

      @@toyotabrony So I've had the bulbs on my GL450 since 2017. Since 2021/2022, I've been taking one of my kids to school where while going and picking him up there are two traffic lights which are a minimum of 2 minutes wait. I can't seem to avoid them. So, these have gotten a lot of sit and wait in traffic lights, where the brake light is on and they are still running strong.

    • @toyotabrony
      @toyotabrony 11 місяців тому

      @@DIYDharma that’s what I’m sayin about the T2 series. It’s a 50/50 of no issues of hyperflash of more than between 2-5 minutes. Or u get hyperflash after 2 minutes.
      Glad u had good experience of that.
      T3 was been solved by hyperflash problem.