Thanks for all your tips. I'm new to resin so I really appreciate it. I accidentally spilled resin on a table and didn't notice until it set. Is there anything that will remove it? I look forward to watching more videos.
I wish I would've started my resin journey a little bit before the pandemic happened. Cuz its impossible for me to find the correct mask and finding 91% alchohol is nothing short of a miracle. Thanks for this video I follow ur IG and I appreciate the effort you put in to make and provide us with this video
I'm planning to start cute resin crafts like this and I'm SO thankful that you've made helpful videos like this bc its much more thorough than what googling got me ♡
I use baby' whipes and parking tape to cleen everything from molds my mate to the tools. I use silicone cups you let the resin dry then crack it and tern it inside out and use parking tape and baby' wipes or clean it Right a way with baby'wipes. Also maybe get some little empty make up jars from Amazon for your bagged glitter and Mike powder being be as big of a Miss to use from the jars
I had to find this out the hard way (a few times) but if you get resin on your skin, use alcohol or hand sanitizer. I tried soap and water, made it worse.I was using a 1:1 resin. Also I want to try a 2:1 resin BUT the last one I used had a really strong smell that didn’t fade for like a day and a half. Any suggestions for resin that’s not “fume-y”?
Oh no! You should not use isopropyl alcohol or hand sanitizer to remove resin from your hands!! From my research using those makes the resin penetrate into your skin and can cause rashes and irritation. You should use a hand/body scrub to remove the resin from your hands.
@@JiminieV you’re welcome! I’ve honestly made that mistake too as well as other resin artists. Also the two 2:1 ratio resins that I mentioned I have never really had any issues with them smelling chemically. Which brand did you use?
@@SweetArtCrafts Amazing Clear Cast. My husband came home and thought I was running a chem lab. I had the window open, while I was doing it but I don’t know if that made it worse
I guess im randomly asking but does someone know of a tool to log back into an instagram account..? I stupidly lost the password. I would appreciate any tips you can give me
I love the army bomb mold! I would love to buy your molds, it’s just it’s expensive in my currency so that’s sad 😔. I use the 3:1 resin and it cures beautifully, just it cures fully in around 48H, so usually my glitters just sinks and if i were to let the resin cure a bit and then add the glitters, the mini bubbles is a headache 😭 i dont know how to solve this
I have tried 3:1 ratio resin before and I just didn’t like it because like you said the glitters would fall to the bottom. You might have to look for another resin to use when using glitter since I have yet to find a solution where waiting for the resin to thicken up to add the glitter doesn’t cause micro bubbles.
Yes! The fumes/vapors from the resin still emit from the resin when the two parts are mixed together even though the resin says it’s non toxic. So it can still affect you.
Whenever I mix acrylic paint with resin, the paint turns into small flakes/chunks. When my piece cures, you can see all the flakes/chunks have sunk to the front of the mold :( Has this happened to anyone else before? How can fix it? Thank you 💗
@@SweetArtCrafts ohh I might need to do that then :( I was thinking of maybe painting the inside of the molds and once it’s dry, pour in clear resin? Would that work too? 🤔 trying to see what I can do with these paints until I can buy new ones :(
@@SweetArtCrafts darn :l lol I guess I’ll have to experiment with other paints then. I’ll try to find the ones you showed in this video. Thanks so much for all your help 😊💗💗💗
Thanks for all your tips. I'm new to resin so I really appreciate it. I accidentally spilled resin on a table and didn't notice until it set. Is there anything that will remove it? I look forward to watching more videos.
I wish I would've started my resin journey a little bit before the pandemic happened. Cuz its impossible for me to find the correct mask and finding 91% alchohol is nothing short of a miracle. Thanks for this video I follow ur IG and I appreciate the effort you put in to make and provide us with this video
This is exactly what I needed!! Thank you! 💗
I'm planning to start cute resin crafts like this and I'm SO thankful that you've made helpful videos like this bc its much more thorough than what googling got me ♡
i've been doing resin for over a year but i'm still watching this😂
I'm about to start buying resin supplies - this video is really informative and I like that you started with safety gear. I love your channel!
This video is VERY helpful & VERY informative! Thank you so much 😊!
I use baby' whipes and parking tape to cleen everything from molds my mate to the tools. I use silicone cups you let the resin dry then crack it and tern it inside out and use parking tape and baby' wipes or clean it Right a way with baby'wipes. Also maybe get some little empty make up jars from Amazon for your bagged glitter and Mike powder being be as big of a Miss to use from the jars
Can you pls make a video on how you make your molds?
Btw I love your videos❤️
Absolutely love your channel ❤ so informative and useful 👍 👌 👏 😀
Thank you so very much for this video. Love watching your videos, very informative. Just getting started with these because you inspired me!
This video is so amazing and informative.
Thanks for sharing these important tips.
All the best 👍🏻
Thank you 💖💖
I just discovered your Channel. Thank you for all tour advices.
excellent content Sweet Art Crafts. I broke that thumbs up on your video. Continue to keep up the superb work.
Thank you, the update is so useful. Do you have a tutorial on how your put the whole in the transparency film?
If you check out my last video I show how.
Thanks Aldo I don’t know if I have all the things
Great, great video-thank you! Could you share a url for buying the exact mask you use? Much appreciated!
💚 love your videos, I love coming to “resin school”💚 random question but Do you ever use any kind of mold release? Xx
I had to find this out the hard way (a few times) but if you get resin on your skin, use alcohol or hand sanitizer. I tried soap and water, made it worse.I was using a 1:1 resin. Also I want to try a 2:1 resin BUT the last one I used had a really strong smell that didn’t fade for like a day and a half. Any suggestions for resin that’s not “fume-y”?
Oh no! You should not use isopropyl alcohol or hand sanitizer to remove resin from your hands!! From my research using those makes the resin penetrate into your skin and can cause rashes and irritation. You should use a hand/body scrub to remove the resin from your hands.
@@SweetArtCrafts thanks for telling me! I used it after panicking when nothing else would work 😩
@@JiminieV you’re welcome! I’ve honestly made that mistake too as well as other resin artists. Also the two 2:1 ratio resins that I mentioned I have never really had any issues with them smelling chemically. Which brand did you use?
@@SweetArtCrafts Amazing Clear Cast. My husband came home and thought I was running a chem lab. I had the window open, while I was doing it but I don’t know if that made it worse
@@JiminieV amazing clear has a strong smell to me and anytime i think about that resin I can smell it up🤮
When searching for an electric hand drill, look for the term "rotary tool"!
I guess im randomly asking but does someone know of a tool to log back into an instagram account..?
I stupidly lost the password. I would appreciate any tips you can give me
@Enoch Patrick instablaster =)
Thank u 😩🥰
This is a very good and informative video. Thank you so much
I liked your video. Do you have a video on how to make the micro beads out of the polymer clay. I would love to learn from you. Thank you 😊 Lisa
Fantastic information! Thank you!
some shaker molds already have a divot on the side for putting the liquid in and the hole punch is not always needed
Yes I know but there are actually some resin artists that I know that cover up that hole because they told me they don’t like using it.
Yeah most resin artists I've seen don't use it; I don't like using it because the hole is really small, really only big enough for a syringe.
I’m new to resin crafting! What brand do you think is the best priced for the product?
I need the hand drill for sure, I'm done manually drilling 😅
It’s such a pain!
I love the army bomb mold! I would love to buy your molds, it’s just it’s expensive in my currency so that’s sad 😔. I use the 3:1 resin and it cures beautifully, just it cures fully in around 48H, so usually my glitters just sinks and if i were to let the resin cure a bit and then add the glitters, the mini bubbles is a headache 😭 i dont know how to solve this
I have tried 3:1 ratio resin before and I just didn’t like it because like you said the glitters would fall to the bottom. You might have to look for another resin to use when using glitter since I have yet to find a solution where waiting for the resin to thicken up to add the glitter doesn’t cause micro bubbles.
I like your video! Can u make also a video on supplies for making resin jewelry fir beginners? Tnx
Do you still need a respirator if you're in an open area? Like in an open garage or outside on a balcony?
I'd still recommend it honestly.
Do you have a link for the mask?
Great tips for the beginners, especially the importance of safety gear. The clay you are using is pronounced "skull-pea"
I was pronouncing it that way when I was practicing my voice over and I thought it was wrong 😭🙈 Thank you for confirming 💖💖
Can you put a link for the letter stickers. I have a hard time finding the right size. Thanks
I got these in store but I’ll try to see if I can find the link. 💖
Aww thanks a million. Also when will you have molds available?
@@sandrawilliams1558 On Sunday at 3 PM EST. I typically have restocks almost every Sunday at the time on my website 💖
Got it...I'll set an alarm. Thanks
@@sandrawilliams1558 www.michaels.com/gold-mixed-font-alphabet-stickers-by-recollections/10506659.html here is the link for the stickers.
This is a great video!
Do you heat cure your clay?
Nice
Thank you 🥵💖
Nouveau is pronounced like new-voh. Thank you for such an informative video!
Normal surgery mask can be use instead of respiratory mask?
No.
Isopropyl alcohol with 91% is almost impossible to find as of this moment. Is there another alternative to it? What else can we use for cleaning?
Baby wipes and parking tape for cleaning are better molds and supplies last longer also She said 70 As the alternative
@@maryrust569 they're both very hard to find in my country. So I'll get myself some baby wipes 🤧
I only used baby wipes and parking tape and my heart gun and long neck lighter to Pop bubles
How much for all materials?
I got resin for Christmas from my sister, haven't used it yet. It says its non toxic and environment friendly. Do I still need a respirator mask?
Yes! The fumes/vapors from the resin still emit from the resin when the two parts are mixed together even though the resin says it’s non toxic. So it can still affect you.
@@SweetArtCrafts thank you so much! Hopefully I can find one in the future😃🌸🌸
Whenever I mix acrylic paint with resin, the paint turns into small flakes/chunks. When my piece cures, you can see all the flakes/chunks have sunk to the front of the mold :( Has this happened to anyone else before? How can fix it? Thank you 💗
Have you tried switching to a different acrylic paint brand? That’s what I did and I don’t have those issues anymore.
@@SweetArtCrafts ohh I might need to do that then :( I was thinking of maybe painting the inside of the molds and once it’s dry, pour in clear resin? Would that work too? 🤔 trying to see what I can do with these paints until I can buy new ones :(
@@sonyablade554 you could do that but it won’t have the same effect as when you mix the paint into the resin.
@@SweetArtCrafts darn :l lol I guess I’ll have to experiment with other paints then. I’ll try to find the ones you showed in this video. Thanks so much for all your help 😊💗💗💗
The dollar tree sells nitrile gloves.
Thank you for commenting this! I forgot that I’ve seen them there too.
for sale
Hello I’m bored
Hai mag
why r you talking so monotone? i really like your videos but it's a kinda sleepy feeling when i watch them