UCS Millennium Falcon Vertical Stand Build and Install Tutorial!! (Efferman Vertical Stand MOC)
Вставка
- Опубліковано 9 лип 2020
- This Video Shows Everything there is to do with the Efferman's MOC Vertical Stand for the LEGO UCS Millennium Falcon set 75192. I show you how I received the Stand and take you through the experience of opening the package and getting my reaction on how it came.
I will show how the pieces to build the stand were packaged as well as Knelling them out to show what kind of pieces are used in this MOC to build the Vertical Stand.
I attached a Speed build to the video and out it to some music, but if you wish to skip past the build it ends at 13:22.
After I assemble the stand I try different things to get the Millennium Falcon mounted on the stand without having it break. After trying a few things I show how I was able to mount the model and what kind of damage was done to it during the process of the install. Hopefully this can help you avoid making the mistakes I did and prevent any damage when you are mounting yours!! After getting the Millennium Flacon LEGO set 75192 mounted of the MOC Efferman Vertical Stand I will show you close up how it connects to the model and how sturdy it is while it is on it.
I will take you through the final step which is putting my Holy Grail of a LEGO set on display in my LEGO room!!
If you enjoy this video please give it a thumbs up and Subscribe to the channel to show your support. Make sure to hit the bell notification to stay up to date on my future videos.
Check of LEGOFanUK on UA-cam
/ @boombrickz
Follow me on Instagram @AandAHobbies
@Cory_lurette
Here is a Link for the Stand from ReBrickable
rebrickable.com/mocs/MOC-1021...
I bought my Stand off a website called Etsy for $73 Canadian dollars including shipping
www.etsy.com/ca?...
#LEGO #StarWars #UCSMillenniumFalcon - Розваги
I've watched car crash compilations less stressful than this. Mad props to you, man.
i’ve tried everywhere the pdf instructions, thank you for posting this, playing you scanning over the instructions at .25 speed i was able to get my stand built. thank you so much
Thank the stars for this video. I had to disassemble this wretched thing three times before I figured out where I kept going wrong, and then I totally wrecked the top of my Falcon in the mounting process. Easily the worst building experience I've ever had, but now that it's repaired and attached.....it is a mighty fine stand.
OMG what a MAJOR PITA!!!! I did figure out a tip that helped me flip the Falcon without a bunch of pieces falling off. I ordered 10 rolls of elastic bandage off eBay. Of course I punctured my thumbs and fingers with these little clips, but I was able to flip the whole ship upside down-by myself. Truth be told some pieces did fall off. I only used 6 rolls. Maybe had I used all 10...
Anyway after gathering dust for a year setting on a table I now have the Falcon inside a huge plexi-case! Much easier to dust!!
Anyone wanting to try the elastic bandages, the ones I ordered off eBay were 3" wide. You may want to try different widths. Or not, the 3" worked for me. A word of caution, they can get in the way of attaching the stand, make sure none are between the stand and hull, the stand has zero wiggle room.
Good Luck!!! And a BIG Thank you to A & A Hobbies for showing me the way to attach the stand!!!!
Thanks for the video, knowing how it attaches mite make it easier, I've also added the Light My Bricks kit, deff worth a look, thanks again
I’m so glad for your video. I have just finished assembling my Millennium Falcon and most of it fell apart as well. I’m still trying to reassemble the bids that fell off before trying the stand again, but at least you have given me a good idea on how to achieve this on my own. So thanks.
I also struggled with the instructions, but as I’m in the Uk I had a paper version of which I had thought was good, but it’s really bad, as you highlighted. I persevered and now I’m eager to see if I can get my falcon on it without any more damage. Unfortunately, I’m waiting on spare parts from Lego as some went missing. There should be a damage warning on the stand instructions or at least instructions on how to get it on without damaging our hard work. 😬
Looks Great I would love to do this!
Great video!
Thank you
Very cool! I think this is what I’m gonna go for when my falcon arrives.
Instructions are not very good
@@AandAHobbies I'll give it a shot. I want one of those Wickedbrick stands but the shipping cost kills it for me.
@@AandAHobbies then i should i maybe do a new instruction.
3fferman be better if it highlighted where to put the next pieces
Awesome vid!! Here is what i did at step 700 ish I installed the stand and was able to finish it with stand on.
Also you can slightly modify landing gear to put 2 back on. Chers
The stand looks great! I ordered one for my falcon. Should come by Christmas. Hope I don't drop it!
thank you I finish the base today and had a lot troubles to put the 2 pieces
It was pure fear and horror, my fingers are to big. I (with the help of my wife) did it, part thanks to your video. She looks great!!! Thanks
The Stand looks great. Pretty nervous when you were first trying to install it
This video was more nerve racking than a horror pic! Lol! Well done man😅
Awesome video mate, that looks like probably the scariest thing you can do with LEGO ever! So pleased you didn’t drop it! I also think you have genuine LEGO pieces as I don’t think technic has the logo on it 👍🏼 Looking forward to seeing a video on a room tour
It was scary standing it up on its side, what a job that would be to put it all back together if it fell lol
AandAHobbies 😂 I would probably just cry
@@AandAHobbies it is easier when it stand on the tips of the mandibles. But easiest at the step when the landing gear is put on.
Very useful video thanks. Instructions are shocking as you said. I had to take a picture of most stages and zoom in they were so small and then nothing showing how to fit the falcon on to it! I would never have known to remove the landing gear 🤣
I am very happy it helped you in some way, thanks for watching
Mate just watched this and felt your pain as you installed the stand. This will be me today!!
Good luck and just remember, it can be rebuilt……right?
I hope I don't get that far. Needing cat like reflexes👍
thnx dude i am just building mine so a stand is in the near future nice to see how it hooks up to the UCS. To bad the instructions are so vague
The designer has commented on this video about improving the instructions, he might have done that now
Thanks for the video. My kit came without an instruction manual.
im debating either doing this or buying the wicked brick stand. im just trying to figure out which is the better.
Great Video bud! But that was scary early on in the mounting stage! It really is a two person job if you don't want to risk smashing it to bits...
I have seen people flip it right upside down on a bed, that’s scary too
@@AandAHobbies Those people have no respect for the beauty they behold! 🤣🤣🤣
@@AandAHobbies Did that, im at bag 9 so it wasnt that hard, just hard to pick up again
I’d love to see how you set your lego room! For example the black shelving you have the millenium falcon on looks great. Where did you purchase that shelving?
Ikea is where the shelving is from
Thanks.
nice work!
could it be mounted the other way around so the cockpit is at the top & its facing to the left?
I have heard of people mounting it that way, I am not brave enough to try to switch it to check
CANADA GANG!!!
Great video , could you get some dimensions for me with it on the stand, I want to know if it will fit on a IKEA billy book case so only need to know width and depth height will be no problem as you can choose where the shelf’s go
For the next generation - the size with Falcon - width 83cm, height 55cm, depth 34cm. Also thanks for great video.
@@petrnovak288 this is what I was looking for. Thank you sir 🙂
While I see your video is a few years old, I have recently purchased the Efferman stand and stuck on steps 20 and 21
I will be so stressing, just like you did very soon
Hi, I have this to hopefully do this weekend, and im already stressed about adding the stand. Do you recommend any tips on how to mount the falcon on the stand?
Take all the panels off the top, rest it on the cockpit side of the escape hatch and take your time
Make it easier take too pamels off so you don’t have parts falling off .also I hit glue gun in a few spots cause panels were lifting off .rather sacrifice a few pieces than come home to find panels on ground smashed to pieces . if I was to do it again, I wouldn’t even use the stand and find a place I can put it where it’s standing on its feet
@@chrisroma4201 Im getting a case for mine, as im sick of dropping things on it and loosing parts.
ich hab das ding auch gebaut und ich sag euch beim zusammenbauen der halterung braucht man mit lego ein bisschen erfahrung weil die anleitung ein paar fehler hat. beim anbringen an den falken ich sach euch ich hab das zu 4. gemacht und hab dabei fast die nerven verlohren ein paar teile si d abgefallen irgentwo innen und ich weiß nicht woher. Das di g hat mir den letzten nerv geraubt. aber es steht ist zu 99% heile und ich bin happy
Hi, thanks for the explination!
Do you know how to do so the pilot cabin will be on top?? I think that looks better that way.
Not sure, depends on if the locking pins line up with it the other way around
@@AandAHobbies Well, found anothe video, let me let you and others people know, if you want it in the top, the red parts need to be like in the picture, if you want the cabin on the bottom, you need to change them, 2 on the left amd 1 on the rigth.
And the 4 grey part on the bottom, you need to take the off.
I will try tomorrow to put my, hope i can do it haha.
@@pablomilsztein6730 good to know it’s possible, good luck man, it was the most stressful thing I have done with lego
@@AandAHobbies i know!!
i try and a lot of parts felt of haha, i was angry, and then i saw on a video that is better to take thise part of first, put the falcon on the stand and then put them back 😄
The round dish is back on for episode 9 btw look closer
Ok ❤❤❤❤
At 9:30 (if you slow video down) you see those 3 points from the L piece side of the to the 5 beam dont align as you add the 7 beam, and you had to squeeze structure to align, i had same issue and i'm convinced something was misaligned elsewhere, but I'm guessing not from your vid.
That is amazing that you caught that I will be checking as soon as I can!! Thank you
@@AandAHobbies I meant to imply I was hoping yours was right too, cuz i couldn't find an error in my following of the instructions, though I had made mistakes in other spots, so i wasn't sure if i trusted my self until i saw you had to do the same. And I only caught as I intentionally went to .25x speed to check.
When I get that you see as million falcon I’m gonna get the stand as well but the million falcon is going to be so hard to build so I might need my sisters and my dad to help me build it and don’t forget it I’m also going to be building it because if it’s my Lego set I’m definitely going to be building it and when I build a stand I’m gonna build it the next day
you need to rotate it 180deg.. the cockpit should be on top not bottom..
Why? It works just fine with the cockpit on the bottom.
I broke a lot of my falcon trying to mount it, and broke a sweat watching this vid
great video, will it fit on a ikea billy bookcase?
Yes it will, Bricksie displays his on a billy shelf
@@AandAHobbies yeah has the deeper ones i saw, i was hoping to put it on the display and then on the standard billy case
On the vertical stand it fits on a 12” wide shelf, that’s what mine are
@@AandAHobbies can i see how you mount yours?
im in progress building the millenium falcon, right now im finnishing the 8th. Can i install the efferman right now? or in which step u suggest me to install the stand? or should i finnish the build first?
Think you should finish the build first
Thanku, alright then 👍👍
Scariest thing to do so nerve racking really hope no one experiences breaking it
Had any problems with the 1x2 plates and the red pins? I had to remove 2 plates and 1 pin didn't fully attach
No but I did break one red pin trying to mount it
@P S if you have Instagram dm me on there and I can probably help you get things sorted
@@AandAHobbies Appreciate your help! But I already displayed it on a coffee table. I was just curios if anyone had the same problems.
Yes some manuals are horrible pdf or like the lego builder ap that Causes my iphone12 to get locked constantly then there is the just build the mirror version would solve a bit and sometimes building it is easyer than the hoops they force you to do it their way while you and i say hey this can be done better maybe we are just more experianced builders?
I just bought this stand and I have my Falcon "unbuilt". I want to build an acrylic case for display. Could someone tell me the dimensions I'd have to use? I'm asking because I'm guessing it'd be taller than without the stand and definitely the depht will change. There is a lot of dust on my house and I want to build the acrylic case before I build the set. Please someone help with this info
22” high by 14” deep by the length of the ship long on the stand my friend
@@AandAHobbies awesome, thanks for the quick response
Glad you had good luck putting it on stand because mine pretty much fell apart in to 30 chunks .I would say this is the worst Lego kit ever made .way to heavy and Chinsey way to mount large chunks .but thanks for heads up on mounting points .had it built but wasn’t willing to just try to put it on till I seen someone else do it.I hated this kit so much that it got me to the point it’ll be my last Ucs .atat was a way nicer build and solid .titanic was a repetive build but stays together .afraid to even look at the falcon cause it’s just built like garbage .thanks again for the help mounting the stand .
The assembly at 8:30 has been giving me a hard time... Is it supposed to be tight, almost strained when put together?
No it is not supposed to be strained, you may have something a hole or two off
@@AandAHobbies thank you. I got to go back and re-check everything... well, 's all part of the experience :)
The instructions are terrible
@@AandAHobbies I'm 99% sure I found the error, the cross beam that goes through the "7-2x9-5" combo with a hole. In the instryctions it looks like it shouldn't be connected to the main legs via the long-pins. It just rests against them when assembled. Whick is "logical" given that the part is always in compression. And the pictures clearly shows that the blue middle part of the pin is exposed. I thought it was wierd, but hey, not insane. So that was probably the issue. I say probably cuz I'm at work and haven't tested it yet. Tonight I finish :)
Anyone know how to make this work for 10179?
I am not sure if it has the same technic pin connection points, would love to get that set at some point
what are dimensions after placing Falcon on the stand ?
14” deep 20” tall and the width of the falcon
@@AandAHobbies thank you a lot :)
What's the name of the shelf?
Vittsjo from ikea
Does anyone have a slowed down version of this because like he says the instructions are ridiculous
You can adjust the speed on the video through UA-cam I believe
@@AandAHobbies thanks this set is a nightmare! I’ve put the Falcon together twice now and I’d rather do that than this stand. So hopefully if I can slow it down you’ll make it easier.
Wasn't entirely clear what he did to attach it.
I am having the worst time getting this set put together. The instructions aren’t very clear and it’s really irritating.
I just finished building it, I would definitely NOT recommend this thing ever. Instructions are probably the worst I’ve ever read, parts are not genuine and the pins are very sharp (assembly was a pain in the ass). I haven’t gone and tested this thing out because I have no faith in it.
Robert Soroka I agree the Instructions are really bad, it does hold it pretty solid once it’s on, but it’s a pain to get mounted
@@AandAHobbies I hope it does. Because the stand has one leg floating up in the air. Again, not pleased but I’ll try my best to get it mounted
That looks like a yikes if even the slightest thing goes wrong... Just a 900 dollar pile of sadness. Loved the video but I will probably go with an acrylic stand for this one.