I'm doing my Avalon rims today. The clear coat is pedaling so I'd like your thoughts. I plan to use Aircraft paint striker to remove the clear coat completely. Then once they are completely dry, I plan on 3 coats of black followed by 2 coats of Black Sapphire and then 2 coats of Glosifier. I dont plan to put any clear coat back on prior to dipping my wheels. Your thoughts would be greatly appreciated.
@@EhabHalat I'm spool sorry use the 2k clear before I use the Plastidip or after Plastidip for protection and shine protection. Again sorry I did not understand. Thanks so much for your help. I really appreciate it. Subscribed.
MrOptioneer use the 2k gloss for the last coat after you apply the plasti dip and pearl colours. Just do one light coat followed by one medium/heavy coat right after to seal it all in and let it dry for 48 hours
of all the videos on UA-cam not many showed four different versions like you did. in my opinion probably the best plasti dip video. thank you for making it!
Hey Joshua, this is your Aunt Linda I heard about all the little friends you made on You Tube! I just wanted to say I am so proud of you! p.s. Your uncle Jim wont be back till next week i'd love for you to stop by and keep me company;) Okay love and miss you bye Joshy!
JOSHUA,then says Joshy!🤔 I think your Aunt Linda is trying to embarrass you, or she's a hater pretending to make a funny comment that's covered in salt.lol Btw her profile picture is creepy. 😂🤣
I took a lighter to the spray can because you said heat it up. The can blew up in my face man!! You'll be hearing from my lawyers real soon!! Johnny Cochran gonna be calling you!!......lol
I just got my rav4 & was looking at cost effective ways to get my stock rims blacked out. I initial was thinking of a wheel skin but I think this may be the best and cheapest route. I most likely will do it with the rims on. Thank you!!
Great dude..this really gives the confidence in doing my car. BTW how long did you wait in between each coats ? will it take more time or can we immediately apply the next coat over the dip?
Hey usually about 15-30 minutes depending on the temperature but you can see with your eyes when its completely dry then its ready for another coat, just make sure its not wet still in certain areas before you apply the next coat
Thank you so much for this educational video. I have a question if anyone could help me…. I have a Nissan Maxima (SL Sports Edition) that came factory with 19” black rims. The black paint is starting to peel and chip off a little bit. Even though it’s black underneath the paint, it still bothers me and I don’t like how it looks. Do I need to have the paint taken off of my wheels before I can spray them with the plasti-dip since they are starting to peel? Thanks for any help.
Hey thanks for the comment. If you want those wheels to look perfect then i suggest you take all the black paint off because if you go over it you will still see the chips/peeled paint underneath the plasti dip
Everything in this video was awesome but I am a little unclear with one thing. If i wanted to get the satin look, do I have to use the matt plasti dip first, and then the semi gloss. Just wanna know if i have to work all the way through stages of the plasti dip or can I just start and only use the satin?
Ben Fanelli hey! The satinizer is a top coat only that goes on top of any colour to achieve the satin finish. You start with your base colour first and then finish it off with the satinizer (2-3 coats of it)
Big shout out to #EhabHalat. Finally got my wheels done with your help. Took your advise 8 coats of Black Plastidip followed by 2 coats of 2k clear. They look amazing. Thanks for all your help.
With the proper amount of coats it could last 2-3 years. The more coats the more durable, it could withstand alot. Minimum of 6 coats, 10 coats would be more suitable for off roading rims.
Ehab Halat I’ve heard that if you don’t renew it like every 5 months then it gets really hard to take it off... is that true? How long should I wait before I renew it?
@@Carlos-tx9vt you don't have to renew it if you apply the proper amount of dip the first time. It stays soft and peelable over time, whatever how long it is.
With certain rims that are bigger where you can see the inside of the barrel when its on the vehicle is definitely worth doing the whole rim but for smaller rims you dont really see the inside barrels when its on the vehicle. I only do them if the customer wants to pay extra for it.
Awesome video !!!!!!! I like that you waisted NO time and got right to it, a quick question, on my rims I want to leave the center section uncoated would I tape it off or is there a product to apply to the aluminum?? Again fantastic video
@Liquid Dipper great video. Hey idk if that’s just me but there isn’t much difference between the satin and matte black? I’ve only plasti dipped using matte black and notice they pick up dirt quicker but I like the look of matte black, will adding the satirizer fix that problem; as is have a similar look but should be easier to clean as it will have a smoothe top layer like a glosifier or in person does the satinizer look a lot different than the matte?
Zane Lee III hey! Yeah you can see a big difference in person. It gives it a light sheen and a little bit easier to clean with the satin finish rather than the matte finish. Always use a clear for a matte finish for extra protection and smoother finish.
I dipped my sons rims a few years ago, but he didn't leave it on long. My question, I didn't like the way the lug nuts felt when I tightened them up. Like I was tightening against rubber! I question that part. Any ideas or concerns with that, Not getting the proper torque on the lugnuts, especially tightening against a rubber base instead of the rim.
Love your channel. Quick question, how do you get the wheels when finished to not feel tacky? I did 5 coats of matte black and 3 coats of glossifier and it is so tacky, sticky. Very hard to clean because you can’t wipe it.
Thanks! This is an old video, their is no way to get it to feel not tacky thats just how it is but check out my plasti dip with 2k gloss video. That is my method i have been doing for awhile, feels smooth and super glossy
@@EhabHalat I haven’t done the wheels yet. I just peeled what I had on for 3 years and I always hated how sticky it was. I have all the stuff including the 2X clear so I’m hoping that solves my problem when I re-do these. Thanks so much for responding so fast all the time🙌🏻
Thank u! Great video! For mine I’m going to do the purple matte color but my wheels are already black, should i spray them silver or white first or just do extra layers of purple with the black tires ?
If you leave the rims on the car while you spray. And then have to change the tire, this will damage the coat on lug nuts, but will it also peel of the rims too since it was sprayed together? Im just trying to figure out if i should take the time to remove the rims or be lazy n just spray while on the car. Spray one rim, then next n by the time im back to the first rim its should be ready for its next coat.
Hey, sometimes the lug nuts will stick to the rim depending on how the lug nuts sit. To be safe i would remove rims and maybe get black lug nuts because it wont last long if you plasti dip the lug nuts you have now.
@@EhabHalat what is the difference with AutoDip. A local place does entire cars, and they said they'd do my wheels in gloss black for about $300. Isn't that a little high or do they do something different than what is shown here? Thanks.
JoeBoone82 Hey! Autodip is also a removable coating which works pretty similar to any removable coating. $300 sounds about right if they are doing a good job and are authorized.
@@EhabHalat Thanks for the feedback. I just wanted to make sure I wasn't getting ripped off, or if I should just spend $100 or so in materials and do it myself. I have zero experience with it though. They said $280 for matte black and it was a little over $300 for gloss black. I couldn't find anyone else local to compare with. Only other options I looked into were powder coating, and checking several places, it was anywhere from $750 and up.
Hey! If you are looking to do a flat black, just use black plasti dip and clear coat them after with plasti dip clear or if you want a more semi permanent finish use 2k clear coat by spraymax
Yeah, i'd recommend plasti-dip if you just want flat black, especially on new rims. Just make sure you use plenty of coats and that, apart from the first 1 or 2, they are laid on thick. It sounds counter-intuitive but plasti-dip is easiest to remove when it was laid on thick, as it tends to peel off in larger pieces. The cool thing about plast-dip is that it will actually protect the original finish of your new wheels so, if you ever decide to sell them, you can return them to original condition really easy.
I sprayed my rims with plastidip, black paint and gloss enamel. They are way too glossy. Is there a way to take it back to a semi shine without removing and starting over? Great how to and you are my newest best friend. JAH
Will Plastic Dip cover blemishes caused by rubbing against sidewalk edges? If not, how does one prepare a rim so it looks good after applying Plasti Dip?
Chris Mack hey, it will cover the curb damage but it will show underneath the dip because it takes the shape of the rim. You will have to repair the curb damage by sanding it down making it as smooth as possible before coating the rims.
Richard Zoghaib yes they would, that's why after I'm done refinishing my factory aluminum rims I'm going to paint them. That way I don't have to worry about parts being pulled off.
Hey nice video. My friend gave me rims which has 5 year old plasti dip on it, but it's faded and has small brown spots which won't come off. Can I use the metalizer over all that and achieve the same look? if not how about a couple light coats of matte black first then the metalizer?
Yes you can plasti dip over previously painted wheels but i would wait 1 month before plasti dipping over them to make sure you don’t have any reactions. Yes you can use metalizer and than the gloss on top
I've watched so many videos on this. Some sand paper the rims at first as well ? Really wanna do this to mine. However I wouldn't wanna mess it up either. Couldn't you just take the rim off the tire as well ?
No need to sand the rim down when using plasti dip. Don’t take the tires off because the plasti dip will get ruined when putting the tires back on with the tire machine. Use tire shine on the side walls and spray the side walls with every coat you do that way it will be easy to peel the dip off the side wall of the tire after or you can just tape the side wall of the tire off
Ehab Halat thanks! I’ve done a few sets of wheels in the past, but instead of black this time, I’m using the gloss Bronze-Gold wheel kit and I’m super pumped! Hoping it turns out well. Cheers!
i almost use one can per rim.i have motorbike.its really durable.i even put nice rim sticker on it.but when u wash them just do it gentle.i also use wax to make the surface smoother and protect it from scretches.
New video on high gloss on rims! ua-cam.com/video/ELCVMYgKMPY/v-deo.html
I'm doing my Avalon rims today. The clear coat is pedaling so I'd like your thoughts. I plan to use Aircraft paint striker to remove the clear coat completely. Then once they are completely dry, I plan on 3 coats of black followed by 2 coats of Black Sapphire and then 2 coats of Glosifier. I dont plan to put any clear coat back on prior to dipping my wheels. Your thoughts would be greatly appreciated.
Hey you should use the 2k clear gloss by spraymax it will make it more durable, watch my video on high gloss rims to see results
@@EhabHalat so use 2k after I strip the old clear coat off that is peeling bad. Or did you mean to use the clear coat 2K on top of the black sapphire?
@@EhabHalat I'm spool sorry use the 2k clear before I use the Plastidip or after Plastidip for protection and shine protection. Again sorry I did not understand. Thanks so much for your help. I really appreciate it. Subscribed.
MrOptioneer use the 2k gloss for the last coat after you apply the plasti dip and pearl colours. Just do one light coat followed by one medium/heavy coat right after to seal it all in and let it dry for 48 hours
of all the videos on UA-cam not many showed four different versions like you did. in my opinion probably the best plasti dip video. thank you for making it!
Appreciate it! Thanks
I've been studying painting with a spray gun and discovered an awesome website at Magic Painter Method (check it out on google)
Best plastidip video because you showed every step, using every product. Well done!
Best plastic dip of rims video on you tube.
If you dont have tire shine Dawn dish soap works great too, body shop guy showed me this awesome trick, skip masking on alot of small projects
Works on caulking your baseboards as well! Great trick for easy clean up. Dish soap has a ton of uses.
This is the only video with four variations and that talks about durability of product. Thanks for the video!
Thanks I’m glad you enjoyed!
@@EhabHalat how much time in between each coat?
@@alexhurtado4708 15-25 min depending on temperature
production level is triple AAA, underrated video!
Thank you! Means alot :)
Glad i watched this before i dipped my wheels! Thank you
One of the best videos showing cleaning the wheels, and the different coatings. Good job. Very helpful.
2 decks of playing cards placed between the wheel and the tire to prevent overspray on the tires works great.
Straight to the point and loved that you did the gloss, satin and metal! Great video! Thank you. I personally like the metallizer
Thanks glad you liked the video
I know this is old but this video is the most detailed guide up to date.
Yeah i got to make a updated video haha but thanks!
Check out my video on how to plasti dip a full car! ua-cam.com/video/yme_e4LMqS8/v-deo.html
New drinking game - Take a shot everytime he says "guys"
You would be drunk af guys
This was a huge help in deciding which finish I want to go with. Thank you!
No problem. Glad the video helped!
Thanks for doing all 4 types of finish!!!!
No problem! Thanks for the comment :)
glad I clicked on this video. I had no idea you were going to do all the different types. Thanks for the informative video.
Thanks for the comment :)
Looking like brand new rims when you plasti coat!
Great job.. appreciate that you took the time to demo each finish.
Thanks :)
Hey Joshua, this is your Aunt Linda I heard about all the little friends you made on You Tube! I just wanted to say I am so proud of you! p.s. Your uncle Jim wont be back till next week i'd love for you to stop by and keep me company;) Okay love and miss you bye Joshy!
Earthling
Lmao!
JOSHUA,then says Joshy!🤔 I think your Aunt Linda is trying to embarrass you, or she's a hater pretending to make a funny comment that's covered in salt.lol Btw her profile picture is creepy. 😂🤣
Earthling best comment ever.
🤣🤣🤣
Don't go Josh, It's a trick. TRUST ME.
Tatooine made sure there was no water in the outer rim.
Dude this video is so great!!!
Thank you! I will have to make a updated video on this!
thanks for showing all 4 finishes side by side at the end!
No problem!
thank you sooo much, I loved this step by step and exact products. made it so easy for me and might even make this my quarantine project!!
Awesome! Im glad to hear that
Excellent video! You covered all aspects of dipping your wheels which I haven't found in many of the other dipping videos.
Barry Julien thank you i will be making an updated video on high gloss finish as well!
You truly are the expert! Great instructional video.
Thank you! Check out my plasti dip with 2k gloss video for updated version of the gloss
I took a lighter to the spray can because you said heat it up. The can blew up in my face man!! You'll be hearing from my lawyers real soon!! Johnny Cochran gonna be calling you!!......lol
😂😂
I just got my rav4 & was looking at cost effective ways to get my stock rims blacked out. I initial was thinking of a wheel skin but I think this may be the best and cheapest route. I most likely will do it with the rims on. Thank you!!
Glad to hear and good luck!
@@EhabHalat thank you
10/10 video. Straight to the point.
Thanks! I appreciate it
Veru nice and well done , as you seem clever and good at it . I liked the satin better than the high gloss , it became a bit cheap . Thanks
I love how everyone's always comes out perfect I try all the time and my shit looks horrible I suck lmao
Same lol
Awesome video, thank you for showing all of the different options.
No problem glad u enjoyed!
Great dude..this really gives the confidence in doing my car. BTW how long did you wait in between each coats ? will it take more time or can we immediately apply the next coat over the dip?
Thanks! Im glad to hear and wait about 15-20 min between each coat
Great vid and comparison 👍
Now, how many minutes should we wait between each coat? Thanks.
Hey usually about 15-30 minutes depending on the temperature but you can see with your eyes when its completely dry then its ready for another coat, just make sure its not wet still in certain areas before you apply the next coat
@@EhabHalat Great, thank you!
Thank you so much for this educational video. I have a question if anyone could help me…. I have a Nissan Maxima (SL Sports Edition) that came factory with 19” black rims. The black paint is starting to peel and chip off a little bit. Even though it’s black underneath the paint, it still bothers me and I don’t like how it looks. Do I need to have the paint taken off of my wheels before I can spray them with the plasti-dip since they are starting to peel? Thanks for any help.
Hey thanks for the comment. If you want those wheels to look perfect then i suggest you take all the black paint off because if you go over it you will still see the chips/peeled paint underneath the plasti dip
@@EhabHalat Okay thank you very much for taking the time to answer. You are very helpful and informative.
Everything in this video was awesome but I am a little unclear with one thing. If i wanted to get the satin look, do I have to use the matt plasti dip first, and then the semi gloss. Just wanna know if i have to work all the way through stages of the plasti dip or can I just start and only use the satin?
Ben Fanelli hey! The satinizer is a top coat only that goes on top of any colour to achieve the satin finish. You start with your base colour first and then finish it off with the satinizer (2-3 coats of it)
Big shout out to #EhabHalat. Finally got my wheels done with your help. Took your advise 8 coats of Black Plastidip followed by 2 coats of 2k clear. They look amazing. Thanks for all your help.
Ayyy! Thats what i like to hear!
Thanks for the detailed video. Helped me out alot with my wheels :)
Do you ever coat the inside of the rim? To prevent seeing the silver color when it's mounted on the car?
Erik Keenan
Aaaaa
A
A
They actually spray inside each time to cover that area, look closely you'll notice
How long will plastidip last on offroad aluminium wheels? How much abuse does this stuff take? Thanks for the vid!
With the proper amount of coats it could last 2-3 years. The more coats the more durable, it could withstand alot. Minimum of 6 coats, 10 coats would be more suitable for off roading rims.
Actually it does. My Silverado was done almost 6 years ago and just now starting to show needing to be redone.
Ehab Halat I’ve heard that if you don’t renew it like every 5 months then it gets really hard to take it off... is that true? How long should I wait before I renew it?
@@Carlos-tx9vt you don't have to renew it if you apply the proper amount of dip the first time. It stays soft and peelable over time, whatever how long it is.
how do you take the center wheel cap off afterwards?
I would of paint inside the rims as well. Some people don't but I think thank it enhances the rims.
With certain rims that are bigger where you can see the inside of the barrel when its on the vehicle is definitely worth doing the whole rim but for smaller rims you dont really see the inside barrels when its on the vehicle. I only do them if the customer wants to pay extra for it.
@@EhabHalat I agree. On my car you can see inside the rims. I forgot to mention that it was a great video.
This gives me the confidence I was looking for to do my wheels, thank you! 🙏
Awesome! Im glad to hear that and good luck:)
@@EhabHalat how many plastic dip did you use peer weel
@@thenotoriouss09 i use 4 cans usually. 1 can for each wheel
@@EhabHalat tanks
Can you do the gloss over the metalizer and will the metal show through the gloss?
Yes of course you can apply gloss over metalizer and yes it will make the metalizer flake pop even more with the gloss
I useda deck of cards between the rim lip and tire when i did my jeep wheels. Worked well
Can I apply Dip Shield right after I finish Plasti dipping my wheels??? Please I need a quick response since I just finished two of my wheels
I would wait at least 1-2 hours before applying dip shield to be safe!
Ehab Halat 🙏🏻 thank you so much for the response.
No problem!
Awesome video !!!!!!! I like that you waisted NO time and got right to it, a quick question, on my rims I want to leave the center section uncoated would I tape it off or is there a product to apply to the aluminum?? Again fantastic video
Perfect! Simply perfect fucking video! I don't need anymore videos on this, you cover everything. Thanks for making this, much appreciated.
Show how you would do your lugs afterwards or before
You just have to buy aftermarket lug nuts with the color you want. They wont hold up if you spray lug nuts
Love the color samples on the wall ...
Straight to the point. Good video!
Thank you!
Is it okay to coat your rims with Plasti dip without a primer paint?
If they are in good condition then yes its ok
@Liquid Dipper great video. Hey idk if that’s just me but there isn’t much difference between the satin and matte black? I’ve only plasti dipped using matte black and notice they pick up dirt quicker but I like the look of matte black, will adding the satirizer fix that problem; as is have a similar look but should be easier to clean as it will have a smoothe top layer like a glosifier or in person does the satinizer look a lot different than the matte?
Zane Lee III hey! Yeah you can see a big difference in person. It gives it a light sheen and a little bit easier to clean with the satin finish rather than the matte finish. Always use a clear for a matte finish for extra protection and smoother finish.
I should’ve gone lighter on my first coats now that I watched this. Ooops
Great job sir👍👍👍
Thank you
I dipped my sons rims a few years ago, but he didn't leave it on long. My question, I didn't like the way the lug nuts felt when I tightened them up. Like I was tightening against rubber! I question that part. Any ideas or concerns with that, Not getting the proper torque on the lugnuts, especially tightening against a rubber base instead of the rim.
TheVintage Attic hey! I never had that issue but i have heard of that happening. You just have to be careful and go slow when tightening the lug nuts
Love your channel. Quick question, how do you get the wheels when finished to not feel tacky? I did 5 coats of matte black and 3 coats of glossifier and it is so tacky, sticky. Very hard to clean because you can’t wipe it.
Thanks! This is an old video, their is no way to get it to feel not tacky thats just how it is but check out my plasti dip with 2k gloss video. That is my method i have been doing for awhile, feels smooth and super glossy
@@EhabHalat I haven’t done the wheels yet. I just peeled what I had on for 3 years and I always hated how sticky it was. I have all the stuff including the 2X clear so I’m hoping that solves my problem when I re-do these. Thanks so much for responding so fast all the time🙌🏻
Good luck! No problem :)
Thank u! Great video! For mine I’m going to do the purple matte color but my wheels are already black, should i spray them silver or white first or just do extra layers of purple with the black tires ?
Spray them black and then spray purple on top
Good video dude very well done I was wondering how they did wheels
Thanks! Stay tuned for more videos! Bigger, better things to come
Thanks for the comparison, great side by side
If you leave the rims on the car while you spray. And then have to change the tire, this will damage the coat on lug nuts, but will it also peel of the rims too since it was sprayed together?
Im just trying to figure out if i should take the time to remove the rims or be lazy n just spray while on the car. Spray one rim, then next n by the time im back to the first rim its should be ready for its next coat.
I don't have jack stands so id have to do one at a time if removing rims
Hey, sometimes the lug nuts will stick to the rim depending on how the lug nuts sit. To be safe i would remove rims and maybe get black lug nuts because it wont last long if you plasti dip the lug nuts you have now.
@@EhabHalat what is the difference with AutoDip. A local place does entire cars, and they said they'd do my wheels in gloss black for about $300. Isn't that a little high or do they do something different than what is shown here? Thanks.
JoeBoone82 Hey! Autodip is also a removable coating which works pretty similar to any removable coating. $300 sounds about right if they are doing a good job and are authorized.
@@EhabHalat Thanks for the feedback. I just wanted to make sure I wasn't getting ripped off, or if I should just spend $100 or so in materials and do it myself. I have zero experience with it though. They said $280 for matte black and it was a little over $300 for gloss black. I couldn't find anyone else local to compare with. Only other options I looked into were powder coating, and checking several places, it was anywhere from $750 and up.
yo yo he said "apply dip coat and dip shield", too get that longevity of 3 years do i need too apply both or just one?
Just one
hi its been 3 years can we get an update lmaooo
Yeah need longevity report please
These wheels are long gone they were peeled and sold but they will last 3-5 years as long as they are taken care of and washed once a week
when letting the tire dry should we air dry it or dry it with a towel?
Air dry
I have a black primer plastic spoiler should I just clear coat it or use plasti dip? I want a gloss black look
I would use plasti dip for a base
How long in between spray coats did you wait? Thanks!!!
Melissa Dillitzer hey! Usually about 15-20 minutes between each coat
How many cans required for all the four wheels?
Caizar Raheem Hey, i recommend 1 can each rim getting atleast 6-7 coats.
On point!! Hey man I've got brand new rims, what's your recommendation on painting them? I prefer regular flat black. Your comment is appreciated 👊🏿
Hey! If you are looking to do a flat black, just use black plasti dip and clear coat them after with plasti dip clear or if you want a more semi permanent finish use 2k clear coat by spraymax
Yeah, i'd recommend plasti-dip if you just want flat black, especially on new rims. Just make sure you use plenty of coats and that, apart from the first 1 or 2, they are laid on thick. It sounds counter-intuitive but plasti-dip is easiest to remove when it was laid on thick, as it tends to peel off in larger pieces. The cool thing about plast-dip is that it will actually protect the original finish of your new wheels so, if you ever decide to sell them, you can return them to original condition really easy.
I sprayed my rims with plastidip, black paint and gloss enamel. They are way too glossy. Is there a way to take it back to a semi shine without removing and starting over? Great how to and you are my newest best friend. JAH
Just spray plasti dip over it again and use a semi gloss but you might have to wait until the original coating on there now cures for about 30 days
If my rims already have plasti dip but is starting to chip, do I need to remove all of the original plasti dip before I add new layers?
You can thin it down with xylene and spray over top if its minor
Should I sand mine down first based on the fact there scraped from the curb?
Yes sand them down smooth before dipping them
Do u have to use the dip coat or dip shield at the end of the six coats for the matte finish?
to get the last wheel look do i just add the metalizer after the matte finish or do i add the gloss as well
You can do either or depending on the finish you want
@@EhabHalat what way did you do it? I like that color
Thats black plasti dip then metalizer over it with no gloss
So when you added the satin, gloss or the metalizer, did you have to protect the tire with the tire shine like you did with the dip?
Yes you do
Can i jump the satinizer if i want to get the metalizer look on my rims or i have to go through all of then to have same look ??
You can do the colour of your choice and then add metalizer. You can add satinizer or gloss afterwards depending on the finish you want
Thanks man , you were very fast replying , iam doing it right now on the first wheel, and needed an answer atm ... thanks again
I try to be quick as possible! No problem and good luck with ur project
What happen if we don put the tire shine on the tyre? To me looks good even if is only is a little bit
It will be harder to peel it off the tires
Can i just used the clear coat to pertect it? Or do I have to paint it?
You can use clear coat no problem
Great video bro!
America 1911 45 acp appreciate it man!
Will Plastic Dip cover blemishes caused by rubbing against sidewalk edges? If not, how does one prepare a rim so it looks good after applying Plasti Dip?
Chris Mack hey, it will cover the curb damage but it will show underneath the dip because it takes the shape of the rim. You will have to repair the curb damage by sanding it down making it as smooth as possible before coating the rims.
would the nuts whole got scratched off when you install/uninstall the tires?
Richard Zoghaib yes they would, that's why after I'm done refinishing my factory aluminum rims I'm going to paint them. That way I don't have to worry about parts being pulled off.
Hey nice video. My friend gave me rims which has 5 year old plasti dip on it, but it's faded and has small brown spots which won't come off. Can I use the metalizer over all that and achieve the same look? if not how about a couple light coats of matte black first then the metalizer?
Cman i would personally peel it all off and redo it but you can try to spray black first and then metalizer for a quick process.
should you mask off the holes? when installing bolts do they rip off the plasti dip?
Ive never had a problem with them but you can mask them if you like
How many bottles per wheel? Looks like it might come out pricey. Might as well get them painted and it will last longer
1 per wheel. Way cheaper than painting but also this is a removable coating not meant to hold up forever
Does this work on fords f150 chrome alloy wheels?
Yes it will work on all alloy wheels
Do you have to wait for the first coat to dry before doing the next,?
Yes with plasti dip wait 15-20 minutes before the next coat or until you see visually they are dry
Got a few questions. Can you spray the plasti dip over previously painted wheels? And can you use the metalizer then gloss over them?
Yes you can plasti dip over previously painted wheels but i would wait 1 month before plasti dipping over them to make sure you don’t have any reactions. Yes you can use metalizer and than the gloss on top
Good DIY.
Thanks!
What brand dip coat & dip shield do i use ? + how many coats
Www.dipyourcar.com for dipcoat. Spray onto wheel and wipe in with a microfibre cloth once every 2 weeks
What happens if you change the tires? Does it hold up when unmount and mount the tires?
Yeah you have to be careful of course but it is doable and even if something does happen its easy to touch up
Fantastic video
Thank you!
Do you need the satin and metalizer?
Its to give it the effect of a satin finish or metallic finish, it Depends what finish you are trying to achieve
I have a diamond plated aluminum truck tool box, will it work on that?
Seline Ramos yes of course this stuff can be pretty much sprayed over anything!
How about using plastic dip and adding dupli/-color clear coat work?
I have never tried it with that clear coat but if you are going to use it maybe test a small area to make sure you dont get a weird reaction
I've watched so many videos on this. Some sand paper the rims at first as well ? Really wanna do this to mine. However I wouldn't wanna mess it up either. Couldn't you just take the rim off the tire as well ?
No need to sand the rim down when using plasti dip. Don’t take the tires off because the plasti dip will get ruined when putting the tires back on with the tire machine. Use tire shine on the side walls and spray the side walls with every coat you do that way it will be easy to peel the dip off the side wall of the tire after or you can just tape the side wall of the tire off
Nice video. Thanks for sharing. They look great.
Thank you! I appreciate it :)
Hey man, how much time in between coats? Probably like 15 minutes?
Depends on how the weather is the day you are spraying but yes usually 15-25 minutes between each coat.
Awesome! I’ll be spraying in ideal conditions tomorrow, roughly 70 degrees with low humidity. Thanks for the swift reply dude!
Matt Fairfield awesome man! Take your time and good luck!
Ehab Halat thanks! I’ve done a few sets of wheels in the past, but instead of black this time, I’m using the gloss Bronze-Gold wheel kit and I’m super pumped! Hoping it turns out well. Cheers!
So after dipping rims, would you have to apply any kind of tire shine to the tires by microfiber towel or can you just spray?
israel scott only use water based tire shine or tire foam. They are both safe on liquid wraps
Liquid Dipper recommendations?
israel scott i use Armor All Tire Foam or Meguiars Back to Black. They shine the liquid wrap as well!
Would it be a good idea to sand the rims before apply the dip
Nope you can go right over the rims without sanding the rims, their is no point in doing that.
At the end of the video, the 4 rims lined up, which product is the second rim, satin or metallizer.
Swag_Skool_101 - It’s a bit late, but the wheels from left to right are: mat, gloss, satin, and metalizer.
i almost use one can per rim.i have motorbike.its really durable.i even put nice rim sticker on it.but when u wash them just do it gentle.i also use wax to make the surface smoother and protect it from scretches.
Should I use primer first?
No need for primer unless you are repairing rust and peeling chrome
@@EhabHalat Thanks man