Air Cooled Volkswagen Shifter Bushing Upgrade
Вставка
- Опубліковано 25 тра 2023
- It's time to replace that old plastic VW shifter bushing with something better. I'll show you the steps to install for a better shifting air-cooled VW. Go to ev4unow.com/vw-bushing/ for more info.
www.bigdadsmoto.com
Music Courtesy of Katelyn Daws
#aircooled #volkswagen #VWSP2 #shifter #install #aircooledvw #vwbug #vwbeetle - Авто та транспорт
Update; install procedure success.
The install video i tried to apply was the inclusion of 6" piece of 1/2" pvc pipe (sprinkler) ***with threads at one end and a cap attached. the cap is larger than the pipe and the bushing is to be slid down the pipe towards the cap where is can go no further. The lip of the bushing where the c clip is to be installed will face the front of the car, the pipe fed into the carrier from the rear using a tow string run through the middle of the pvc and bound in the cap. A great tool to guide it all is the spring loaded multi claw parts grabber on a flexible shaft - 2 foot plus length.
Must drill a hole through the pvc pipe 4'' from the bushing location when on the pipe up against the cap; you'll run a bolt through your front shifter install hole to lock the pvc/bushing arrangement (which is pressed up against the backside of the carrier mount).
Putting the clip on is the bitch.
i tried the pre expanded c clip tool design and there''s no support to slip it onto the bushing instead i made a 2' long sleeve that will install over the pvc pipe with an outside diameter slightly larger that the bushing flange, preinstalled the c clip already opened on the very edge, installed the sleeve on the pvc pipe after is was hanging in carrier and before locking in the front via the shiftier bolt hole install, pushed my sleeve up against bushing, kept pressure on sleeve via lockable pliers on pvc at butt of sleeve, used screw drivers @3:00 and 9:00, against c clip and drove it home. The c clip will not want to cooperate regardless there's no slot it rests on, maybe more cooperative if not a metal sleeve. ** six inches too long, reduced to 1/2 " longer than drilled hole location.
Looks great but they don't ship to the UK for those like me.
Sorry to hear that
Hi, this bushing only EUA?
Not sure what EUA is? It’s made of Delrin.
@@BigDadsMoto thx
Well i tried their installation procedure which is not what this video covers and i even enhanced the parts used a bit to assist and still haven't succeeded. There's a competing unit that simply snaps in utilizing clips after compressing round bushing. One more hour and i'll throw the $30 bushing in the garbage or modify it somehow. Go the snap in version save the hassle.
Sorry it’s giving you so much trouble. I couldn’t get a camera in the tunnel to film the install.
What’s the other brand you are looking at?
@@BigDadsMoto viewed on anther vid on topic, no clips to install, snap in. No matter for me now thought, installed the clip and added instructions for process with a sleeve added on subject video.
Hello..congratulations for this channel, I noticed that you have a VW sp2 model, I also have one, here in Brazil we have an official international model club with a lot of material, we seek to bring together owners from all over the world, we send commemorative material to all members, if you are interested it will be a great pleasure to have you you with us. att Beto Paz
I'd love to be a part. Share the contact info.
This could be deleted to tidy up the subject. No help here
Very unclear!!!!!!!
This is very difficult to install 😮the bushes. No explosion on how to install this bushing. Do not be fooled by this video.
The original style isn't that bad to replace. I did it solo as one of the first repairs I did to my baja bug. A wire hanger bent up as a shift rod support helped a ton
just posted process, still sitting in your tool box?