VW Shift Rod Bushing, How-to Install the Custom Bushing from EV4U
Вставка
- Опубліковано 29 січ 2018
- This video shows how-to install the Custom Shift Rod Bushing for Classic VW from EV4U using their Installation Kit.
The bushing shown in the video is made of bronze.
The Bushing we sell is a custom **Delrin® bushing that is guaranteed for as long as you own your vehicle. The Delrin® bushing replaces the bronze bushing that we sold for many years. We believe it is a superior product and offer the exact same guarantee.
Please direct all questions or comments to: info@EV4Unow.com
ev4unow.com/vw-bushing
**Delrin® is a registered trademark of DuPont de Nemours, Inc. Delrin® acetal homopolymer (Polyoxymethylene POM) is the ideal material in parts designed to replace metal. It combines low-friction and high-wear resistance with the high strength and stiffness. Compared to acetal copolymer, Delrin® acetal homopolymer offers higher tensile strength, stiffness, creep and fatigue resistance, and significantly higher impact resistance. - Авто та транспорт
Fitted mine yesterday in about 20 mins, very useful video
Wow !!! Some one was doing some thinking !!!! I will be buying this Shift Rod Bushing kit very soon !!!
you guys are friggen cool!
Got mine today, nice piece of kit.
Thank you
Thanks for the video. I just ordered one with the tools. Is the reason that you do not just remove the hanger plate, and do the install outside of the car because you want to leave the hanger plate where it is to maintain where the shift linkage sits?
Thank you for your order. The hangers are spot welded in place and a pain to remove. But one could remove the hanger and install the bushing outside of the tunnel. But after removing and reinstalling the hanger, the bushing installation tool looks like the deal of the century.
Any reason why the bushing was changed from brass to Teflon/plastic? We previously fitted the brass one and it was perfect, but I have a new bug and will be fitting the newer version.
Thank you for being a subscriber. The quality of bronze stock had really diminished and the cost kept increasing. Delrin is a superior material for these bushings and it allowed us to lower the price of the bushing.
Sure wished I had that bushing! Are there any still available?
www.EV4Unow.com
Brilliant! I bet there is a little cursing while doing this. Do you end up removing the seats to get in there?
Cursing and removing the seats is not necessary, but some may find it helpful.
I highly recommend removing both front seats and maybe the rear unless you are a contortionist. It is difficult to see inside the hole, especially if your eyes are over 50 years old. Good lighting is key as well.
can not find any info on website for bushing?
On the Home Page, listed under Parts. Here is a link. www.ev4unow.com/VWShiftRodBushing
The website says that these bushings are out of stock. Will they ever be available again?
Yes they will.
@@ev4u Ooh, thank you. I'll be waiting ✌🏻
Do you make new shift rods?
No
2 things you left out. Clean gunk off of the shift rod befor you shove it back into the car. How much lubrication is required and where?
That is discussed in our video that deals with removal and installation of the shift rod.
Thanks for watching.
Where buy it? Did u send to México?
www.EV4Unow.com We ship worldwide.