First start up on the K24 swapped prelude
Вставка
- Опубліковано 21 жов 2024
- 1996 Honda Prelude
JDM K24a RBB
Big Turbo 82mm
Instagram - @Thatpreludeguy_k24
@FastFenders
.
.
.
.
.
.
.
.
.
.
.
#ToyoR888
#MHtires
#Clutchmaster
#Twindiscclutch
#EvoRegamaster
#PRELUDENATION
#STAYLUDING
#VMSRacing
#Cjs_wiring
#ktuned
#hondata
#kprov4
#kseriesonly
#vtec_warriorz
#bballiance
#hasport
#k24a
#H22a
#4thgenprelude
#Sacramentoraceway
#hondata
#Dailylifestyle_cc
#hybridracing
#bb1prelude
#RHD4thgenpreude
#vtec_warriorz
#kseriessquad
#Unnoticedhondas
#Valvoline
#VR1
This thing is sick. You've done a great job so far
Thanks man I really appreciate that 🙏🏼
Brudda sick build💯💯💯 btw what caused the fuel leak and thats a ptfe hose correct?
The future
Yes as the h series are starting to get over priced lol
Spun my rod bearings AGAIN in the euro R lol so time to try the K life.
Great video tho 👍🏽
Send it h series are getting more and more expensive lol
I'm in Stockton. I plan to do the same swap but I'm still figuring out the wiring part under the dash since the bar station doesn't allow jumper harnesses any more.
What swap are you planning to swap in there? I'm in Portland Oregon and I'm going to drop in a 2004 accord ex k24a4/apg6 drive train and do my absolute best to keep the CEL off and run it on stock immobilizer and stuff. I have a 1996 prelude bb2 that is presently a flawless 96 bb1 clone mechanically. I decided imctaking that swap and putting it into my 2001 E.B.P. BB6 SH w/ 96 vtec ecu just to have THAT car run with no C.E.L. and ditch/preserve the 130k O.G. matching train in it.
Honda gang!
@@darbymcbride41 I wanted to do a k24a2 out of the tsx, but since time has passed and ran into some complications, I ended up doing a h23a mystery blue top with a LSD transmission. Being in California, swap laws here are annoying and strict. I have a 95 lude special edition that came auto and I converted it to manual. I was fortunate to grab one that came with a type s head from the factory. I am running a usdm p13 ecu and it responds very well with the motor. Especially, if you commute on the freeway a lot, it's a good ECU to run in my opinion. VTEC is very aggressive, torque is amazing and you surely can have some fun with it.
I dig that. Sounds very nice. The k24a4 swap I received was dropped out of my buddies car prior to it being scrapped and was free to me. We drove it to it's death. Had it not been for the fact it was free I wouldn't really have googly eyes about doing the swap. I personally want my prelude to be a romp toy and all I really am going to prioritize before dropping it in there is probably a 4.7 fd swap and an lsd. I haven't calculated mph with the 4.3 to 4.7 fd in APG6 per Zeal yet or considered what fitment and wheel diameter or anything. I feel like it'd be "fair" and hopefully hold up to constant and deliberate attempts to send that k24a4 to the moon. I have a k24a rbb chilling and when I find the cash to kpro or better I'll slap it in there.
I've got an h22a type s longblock and m2s4 w/ m-factory. Link g4x plug in obd1 civic link. Ported and gutted and welded egr/iab shaft and 70mm tb p13 intake, ati damper, boundary race cnc oil pump, moroso baffled pan, rosko iacv remote mounted, on rdx 410's.... sits.... I don't use it.
I decided that since my sh came 100% stock that I'll respect its integrity and that being said it'll see any number of 3 h series swaps I have around.
The bb2 will see any number of the 4 k series vtec longblocks I have kicking.
I have a complete ef k swap kitted together featuring k20z3/ep3 5spd. That's gonna be a riot.
Not flexing just sharing bro. It's all love.
@@darbymcbride41 any write ups on the forum about the wiring etc? In the future, I may think about still going to k24a2. I love the H motor, it's getting harder to get parts for it let alone just finding h22a1 injectors. I had bought "new injectors" online and they didn't hold the right threshold, costing a few days because the motor was idling very low and sporadically. It had me thinking it was a icav, a vac leak, or I picked up a messed up motor.
Damn! Makes me wanna hurry up and finish my 5th gen Preludes K24A! Is it me or does yours idle lumpy as hell? Sounds like she could use a bit more fuel on idle.
Yeah she needs a little more adjusting here and there in time I’ve been dialing a bunch of stuff on the car still
Real talk I got a Milano red one and I have the k20 should I?
@@chrismanhoahh7987 be prepared to spend money lol and then yes
Straight up beautiful man! I love seeing this lude, quick question bro where do I find the bracket that you're using to relocate the battery under the fender does it come in a kit to relocate everything or is it just a bracket itself?
Oh yesss thank you man I appreciate that
It’s just the bracket it’s dc5creations for a rsx but I just re drilled a hole and riv nutted it and made it work looks sick right?
@@PatrickVerrett it looks great man does it fit well with no issues with the bumper cover on and does it fit a full size battery or a certain size?
@@crv_tom it only fits the 57dr like Integra style batteries and where I mounted it up a little higher I had to cut a piece underneath we the headlight bracket bits that’s just cuz I mounted mine up as high as I could just for my own piece of mind I’ll send you some pics on IG when my car comes back from paint to show you how high I mounted it
@@PatrickVerrett thanks man that would be awesome I'm definitely interested in possibly doing it so I would really appreciate that.
Definitely considering this in my 5th gen. Gunna wait for my H to die first. Sick car bro!🔥
So what Cv shafts ended up being good my dude? I just blew one around the corner because it was too short.Cheers
I just have to be careful when I’m making u turns other than that it’s all good but I’m still going to get measurements and order some insane shafts
@@PatrickVerrettI was looking at insane shafts last night might be worth it just getting em and calling it done hey .All the best my bro.
Look into the 9th gen civic si
Any insight about the axle solution please hmu.
Yo! Nice Lude bro! I'm building a 4th gen as well. Do you know of any resources for window molding? Especially the back window molding and bottom piece for the back window. If you, thank you!
Zero resources for all that just lucky if you find one lol
@@PatrickVerrett Okay. Thank you for your reply.
Nice
I have a 4th gen thinking about swapping because it just threw a rod
You got deep pockets send it! K series power is the way
@@PatrickVerrettI have a H23 vtec thats on a base line tune I think p28 ecu chipped but if I remember correctly, something with the cam position sensor or the valves going, but mechanic said it might be cheaper for a k swap? How much ballpark was all the parts? Thx dude love the car
@@PatrickVerrettidk if that’s even the problem that’s what mechanic told me it just stalls out when I’m stopped or bogs hard til i restart it, and it always starts but struggles. I can drive about 10-20km last time I drove it.
How would you jump start the car with the battery where it's mounted? I'm asking because I think I saw this for the 5th gen and wanted to know before I relocate mine
You would have to remote mount another tab for the positive with a cover or cap on it that’s more accessible
@@PatrickVerrett thanks man I'll look into it
Want to swap my 96, I have many questions $$, parts,and more. Glad I found your channel
I think in the near future I might build up a 4th gen k swapped and explain the majority of things to get and how to go about swapping it