This was a great help to me. I appreciate it! FWIW, my 2017 Fiat 500e lied to me! The instrument panel told me that the right rear stop light was out. It was the *left* rear stop light.
I think 'left' or 'right' is defined from the sitting position of the driver. That's how it works in aircraft. Engine one is on the Left of the pilot sitting engine 2 is on the Right.
Perfect video! I want to switch all my lamps to LEDs to save some energy so this is very helpful! Thank you Vincent! Now I know where to clean next time when I detail the car~lol. PS. for all 500e Owners, LED doesn't work well with projector headlamps so use HID kit or better light bulbs if you want to switch lights to LEDs.
I recommend using a 10mm driver to remove the fasteners that hold the assembly to the body, rather than using the Philips head screwdriver. One of my fasteners was on so tight I stripped the Philips head trying to remove it. Only finally got it off using the 10mm driver. Also, my 2017 500e had T20 screws for the lamp module.
This was a great help to me. I appreciate it!
FWIW, my 2017 Fiat 500e lied to me! The instrument panel told me that the right rear stop light was out. It was the *left* rear stop light.
David Shadovitz my 2013 did the same thing
Same here! :o
I think 'left' or 'right' is defined from the sitting position of the driver. That's how it works in aircraft. Engine one is on the Left of the pilot sitting engine 2 is on the Right.
FlyboyUtah Apparently, this doesn’t apply to the Fiat 500e. Mine lied to me too!
For some reason mine does the same
Very clear. You're the only one who has has taken the time to explain the difference between the three lamps. Thanks!
Perfect video! I want to switch all my lamps to LEDs to save some energy so this is very helpful!
Thank you Vincent! Now I know where to clean next time when I detail the car~lol.
PS. for all 500e Owners, LED doesn't work well with projector headlamps so use HID kit or better light bulbs if you want to switch lights to LEDs.
Thank you for the video! It was very helpful ☺️
Thank you for taking the time to make the video. :)
Your welcome!
Just what I needed to know. Thank you.
You are welcome!
I recommend using a 10mm driver to remove the fasteners that hold the assembly to the body, rather than using the Philips head screwdriver. One of my fasteners was on so tight I stripped the Philips head trying to remove it. Only finally got it off using the 10mm driver. Also, my 2017 500e had T20 screws for the lamp module.
The brake lamp is of the type "P21/5W". The vide also says so.
It's a T20 on my 2013 Fiat 500e. Not a T25...
Yep, T20 for my 2015 500e. T20, not T25. Thanks for the video.
Yup T20 on my 2017
Hi, thanks for the video but I couldn’t pull the bulb out. I broke pulling it. Could you let me know how you took it out? Thanks
I believe you push the lamp in and rotate 90 degrees.
Yes, I saw on one of the videos. Thank you so much. I was able to fix the light :)
Simple. but clean the dirt out before you put it back! Thanks