Debo quitarme el sombrero delante de esta señora, no necesita hablar para realizar un tutorial excelente. Mi admiración y respeto para una profesional.
Al fin otra mujer que haga estos trabajos !!!! No me hace sentir tan sola en un mundo de hobbys de hombres !!! Excelente trabajo !!!! Saludos desde Argentina !!!!
¡Gracias! ¡Definitivamente no estamos solos! Solo en mi país, dos mujeres maestras de este deporte (este es un deporte no olímpico en Europa): yo y otra modelo talentosa)))
What patience you have, it takes a lot of work to get to this end result, WOW! The next year will be exciting to watch and I wish you that it brings everything you want. Thank you for sharing your incredible talent with us!
Thank you very much! Next year will be my symbol on the Eastern calendar))) Year of the Tiger - in the year of the patron animal usually all wishes and plans come true)))
The nice part about having more parts and detail in the structure is that you have to do a lot less demolition and modification which saves so much time. Thank you Olha!
if you want the hull of a shipmodel to be sturdy this is the way to do it. In the beginning days of my wood modeling a pensioned professional modelmaker that worked at the Rotterdam Maritime Museum showed me the logicalness of doing this. I may not always do the whole hull but i wil allways strengten the bow and sternsection and pre sand the parts down before glueing them in place. Well done!!
That's right! This was explained to me by my trainer of shipmodeling, when he "disassembled my first model into splinters" - virtually of course))) And I also did not understand this until I tried it in practice! Apparently every beginner should step on this "rake" to understand this!
I'm glad I read the description because I was confused at how much extra parts you were adding to a kit. I still don't really understand why it's necessary since kits usually just plank across the ribs, but you clearly know a lot more than I do about ship building so I trust the finish result will be fantastic, and that's what's important.
In this kit, the planks are in one layer (because part of the frame will be open on the right side) so to facilitate the process of laying them, it is better to make a perfectly flat surface at first! Also, over time, such a planking without filling the spaces over time is deformed under the influence of humidity and bends (dents appear) between the bulkheads...
You have done an amazing job on the hull so far. I bet figuring out how to cut those compound angles about drove you nuts. Looking forward to seeing more on this build.
@@OlhaBatchvarov The sanding, and the filling, and the sanding................. It's like the Space Shuttle. Every block of insulation tile was a custom fit just about.
You did very well with the compound angles, hard at first to figure out I know done a few of them for the Constitution. But you have done a much better job at them than I did. I can't wait to get my eyes fixed so I can continue, one day I hope to be just as good as you!! Thanks for sharing.
W ow......ich finde es toll wie das machen . ich selber habe vor jahren mit der Bounty angefangen und bin nun nicht mehr weiter mit dem Bausatz gekammen
Olga, I am inspired and somewhat intimidated by the excellence of your work. I am currently building an Amati kit of Vanguard. It is difficult and takes real patience to work at that level of detail and master the tools needed for it. Perhaps the most difficult part is understanding all the names of the various parts of the ship and its rigging. It's a whole new language for me and the instructions expect you to understand all of it. I was wondering what kind of preparation you had for your ship building work. It is a pleasure to watch your work.
Oh, I understand you well - I've been learning the terminology from the beginning - in English. This is a new language for me in the literal sense))) But if you build and study in order, then everything is not so difficult...
Da kann ich nur beipflichten. Baue selber die Bounty von del Prado. Bin mit der Takelage dran und muss noch die Segel nähen und diverse Restarbeiten an Rumpf und Deck ausführen. Der Bauplan von del Prado ist ein Witz. Oft auch noch falsch dargestellt. Maßstab 1 zu 47
I am literally blown away by your talent Olha :o This is really an amazing work and it needs lots of patience and you just nailed it !! That hull looks just perfect. I am really impressed how this turned out and I can not admire you enough for that !!
Thank you very much! I really want to make this frigate the perfect model - so I'm in no hurry to build her. I always have the same problem - not enough wood to fill the spaces and that's why I do it in part. But for this ship, I patiently bought a package of basswood once a month and filled all the spaces)))
Thank you very much! Apparently before the planking, there will be another video about the preparation for this process. I also need to prepare all the parts of backbone!
Очень очень круто!!!! Не думал что женщины увлекаются карабельным моделизмом, весьма приятно удивлён! Творческих вам успехов!!! Подписался на канал!!!!!
Olha, que trabalheira!... Ficou ótimo e muito bem estruturado. Gostei muito. " The sky's the limit so have your happiest new year yet! HAPPY NEW YEAR".
This model is with single-layer planking. So when filling the spaces, the main goal is to prepare the perfect surface for planking. But I also increase the gluing area, simplify the marking for the planks, have the ability to bend the planks directly on the hull with a soldering iron and nail (or clamp) where I need to and not just on the frames...
awesome job !!! I was delighted to see it !!! I would like to try to do it !! but I don't have all these tools. I repeat, precious work. !! с новым годом 2022 !!! Feliz año 2022 !!!!
Congratulations on your work ......I love to do this too .....I'm in Brazil .....I've already signed up ....I'm going to try to make one like it ......God bless you
There are so many benefits! More importantly, the hull will not twist over time. Especially such a long model. Second, it will be much easier (10 times) for you to arrange planking. Especially when it is only 1 layer of planks. In addition, you have a larger area for gluing the strips, you can hammer nails with clamps anywhere or bend the planks directly on the hull with a soldering iron...
Olga, I am in awe of your skill set and attention to every little detail on each of your builds. Besides giving you freedom in anchoring hull planking, would you please share any other thoughts on why you prefer to fill the cavities between hull bulkheads? And, may I add, I hope 2022 is a great year for you and your family.
Thank you very much! But this is really only for the perfect planking! This not only facilitates the planking process, but also prevents deformation of the planks from changes in humidity, especially on such a large hull. This is a very boring job, but if you do not do it you will always regret just looking at the model. Now I live in a very humid climate and see my two models, that even for small hulls in this area I need to completely fill the space!
Olha, Thanks for explaining why the fill in between all your bulkheads! I am building the Artetestiana Latina Bluenose as my first wood ship model and I wondered why I needed a second layer of planking. Is there a Top Hamper to the USS Confederacy? Or is it just a Hull Model?
Very nice work. That is going to give you a near perfect substrate for applying the planking. 👍👍 I used to work on card stock ship models. One build was a scratchbuilt design I was doing for an online contest run by Dimitri at Digital Navy. To fill the spaces in the ships framing I used pink insulation foam.
Your skills, knowledge, and techniques are inspiring. It's been ten years since the last ship I've built. After watching the first three videos of this build, today I started my next build. Keep the videos coming. Oh sorry, I'm not subscribed... And now that's corrected.
Hello Olha. I am very impressed with your work. You are my inspiration! A question: what size of wood blocks did you buy to make the filling pieces between bulkheads, and where did you get it? Thank you in advance
I can't count the time clearly for this ship because it's too big and I run out of wood all the time - so I just spend more time waiting for materials than building her. I think if I built her every day it would take at least four months! And in fact - I opened the box with the kit a year ago)))
Thank you! This is 4'' Table Saw - Byrnes Model Machines I will put a link in the next comment on the video about it, if UA-cam does not block. There is a seller in the description under the video!
Great build. I have a question. Why did you make a "solid " hull as opposed to frame and plank? I understand it would be more solid ( and heavy), but did the blocks really make it easier to cover?
Thank you very much! There are many advantages to this! The most important thing is that it will make the planking process 10 times easier. You can bend the planks with a soldering iron right on the hull and also nail the clamps where you need! Secondly, you will get a perfectly flat surface and it will not deform over time (usually after a few years the location of the bulkheads and the concavities between them become visible).
At the moment, I'm cutting the planks for this ship, as I'm going to replace those that come from the basswood in the KIT with the precious wood. And when I make the planking, I will publish the next video - it's a big model and takes a lot of time...
Oh oh now I need a scroll saw! Did Model Shipways instruct filling the hull with solid wood? I did this on their Niagara, did not like the idea of complex single planking. Some day I need to finish that ship, it is actually a very hard kit, lots of real fabrication.
This is a similar technique as in most of their kits. And the same single planking. But I will use hard wood and bending the planks with a soldering iron directly on the hull, so I definitely need to fill the spaces...
Many advantages: - larger gluing surface - it is easier to make planking on an already properly shaped hull - this model has one layer of planks - you can also drive nails where you need to clamp the plank, not only on the bulkheads - and the most important thing is that you can bend planks with a soldering iron directly on the hull
Balsa can be used for small hulls that are planked with veneer. But for skeletons with large gaps between bulkheads, it is better to choose a basswood. Basswood can holds nails well unlike balsa. Also with basswood I can bend the planks right on the hull!
To think back in the wooden ship building days these were made completely by hand, no power tools, and no laser cut parts. I know I would not want to do it that way, tough enough even WITH power tools. I can never seem to get past the hull into planking. I have only one hull fully planked, and it looks like crap. Started a Victory and got to the planking stage and of course messed up the lines for the setting planks. The only one I have built that actually is looking good is a Dumas Chris Craft, i'll leave doing the classics to those who can build. Amazing work here .
Thank you very much! I know that feeling with planking! On my VICTORY, I probably tore off the planks three times and started over, oh no - I finished her first planking on the 4th try! So with that hull, the iron was my best friend))) And probably a whole bottle of PVA was spent there!
@@OlhaBatchvarov I made the mistake of using CA. No going back with that unless I soak the whole thing in Acetone. :( Live and learn, they are nothing like building an RC airplane. LOL
Because here is one layer of planks on the model! And if you want to make them correct and most importantly fair surface on such a large hull with large distances between the bulkheads - you need to completely fill the spaces. Otherwise, the planking over time from the change in humidity in the air will begin to deform and there will be dents between the bulkheads!
@@OlhaBatchvarov Thanks. I did see that but Bondo isn’t available here. I was wondering if it was epoxy or something so that I might be able to find an equivalent here.
These 300 grams of Baswood are nothing compared to the heavy plywood from which the model's skeleton is made. But the planking will be 10 easier to do and the planks will not deform over time from changes in humidity!
Very good! I understand why. But I’ve never fully filled a hull prior to planking. I do see several advantages to planking a basically solid hull. Your videos are great. But can you explain why you make this step? As you know, I have this kit in my shop. It is not next, but I am considering filling hulls with my next build Niagara from Model Shipways. Confederacy may be next… THANK YOU OLHA!!
Thank you very much! This not only facilitates the planking process, but also prevents deformation of the planks from changes in humidity, especially on such a large hull. This is a very boring job, but if you do not do it you will always regret just looking at the model. Now I live in a very humid climate and can see on my two models, that even for small hulls in this area I need to completely fill the space!
![The biggest and most difficult ship model kit - #05 - USS CONFEDERACY-[Lower counter]](http://i.ytimg.com/vi/IGpezxV6DPo/mqdefault.jpg)
![The biggest and most difficult ship model kit - #05 - USS CONFEDERACY-[Lower counter]](/img/tr.png)
![The biggest and most difficult ship model kit - #06 - USS CONFEDERACY - [Beakhead]](http://i.ytimg.com/vi/5aumYDn9CjU/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
![The biggest and most difficult ship model kit - #09 - USS CONFEDERACY - [WALES]](/img/n.gif)
مذهل للغاية !!! عمل في غاية الإتقان و الإحترافية . من محاسن الصدف ان اجد مثل هذه القناة إنها مدرسة متميزة في هذا المجال . كل الشكر و الإمتنان لك .
شكرًا لك!
Even if I never build such a complex model, watching you work is an inspiration
Thank you so much!
There are those that are skilled. There are those that are gifted. Then rarely...there are those that are both. Bravo.
Thank you very much!
Debo quitarme el sombrero delante de esta señora, no necesita hablar para realizar un tutorial excelente. Mi admiración y respeto para una profesional.
¡Muchos gracias!
Al fin otra mujer que haga estos trabajos !!!! No me hace sentir tan sola en un mundo de hobbys de hombres !!! Excelente trabajo !!!!
Saludos desde Argentina !!!!
¡Gracias!
¡Definitivamente no estamos solos!
Solo en mi país, dos mujeres maestras de este deporte (este es un deporte no olímpico en Europa): yo y otra modelo talentosa)))
@@OlhaBatchvarov gracias por responderme en castellano
@@gabrielleandreamicca796 Español
@@gabrielleandreamicca796 castellano
En CASTILLA
I love watching someone great at their craft.
Thank you!
Was für eine Arbeit . Wird der Rumpf jetzt noch beplankt
Einen guten Rutsch ein gesundes und gesegnetes Jahr 2022
Viele Grüsse Frank
Ja, naturlich wird es beplankt jetzt. Eine sehr netter modelle, eigentlich.
Danke!
What patience you have, it takes a lot of work to get to this end result, WOW!
The next year will be exciting to watch and I wish you that it brings everything you want.
Thank you for sharing your incredible talent with us!
Thank you very much!
Next year will be my symbol on the Eastern calendar))) Year of the Tiger - in the year of the patron animal usually all wishes and plans come true)))
You make it look so easy. Just brilliant work. Excellence.
The nice part about having more parts and detail in the structure is that you have to do a lot less demolition and modification which saves so much time. Thank you Olha!
Very true!
Це неймовірно !!! бракує слів, щоб передати всю насолоду, яку я отримала під час перегляду!!! ДЯКУЮ!!! Бажаю успіху!!!
Щиро дякую!
That's amazing, the patience and attention to detail you show.
Thank you!
I am just in Awe of your skills and determination to build this ship..! XXX
Thank you!
if you want the hull of a shipmodel to be sturdy this is the way to do it. In the beginning days of my wood modeling a pensioned professional modelmaker that worked at the Rotterdam Maritime Museum showed me the logicalness of doing this. I may not always do the whole hull but i wil allways strengten the bow and sternsection and pre sand the parts down before glueing them in place. Well done!!
That's right!
This was explained to me by my trainer of shipmodeling, when he "disassembled my first model into splinters" - virtually of course))) And I also did not understand this until I tried it in practice! Apparently every beginner should step on this "rake" to understand this!
You continue to inspire me to build better
WOW - Thank you!
That is a really nice job you have made so far. You are obviously a very talented craftswoman. Well done.
Thank you very much!
Absolutely fantastic work!
Looking forward to the next video!
Thank you! I am working on it...
Много нового оборудования!!!работа как всегда на высоте👍👍👍
Спасибо!
Да такой фрегат требует много инструмента - все что на коллекционировала за 2 года)))
I'm glad I read the description because I was confused at how much extra parts you were adding to a kit. I still don't really understand why it's necessary since kits usually just plank across the ribs, but you clearly know a lot more than I do about ship building so I trust the finish result will be fantastic, and that's what's important.
In this kit, the planks are in one layer (because part of the frame will be open on the right side) so to facilitate the process of laying them, it is better to make a perfectly flat surface at first! Also, over time, such a planking without filling the spaces over time is deformed under the influence of humidity and bends (dents appear) between the bulkheads...
You have done an amazing job on the hull so far. I bet figuring out how to cut those compound angles about drove you nuts. Looking forward to seeing more on this build.
You'ld be astonished if you could see how easily she came up with them... I know I was. It just flowed.
Thank you very much!
That was the most interesting process in this work))) - the most boring was sanding!
You should learn to meditate through sanding. Life won't be the same again. 😉
@@OlhaBatchvarov
The sanding, and the filling, and the sanding.................
It's like the Space Shuttle. Every block of insulation tile was a custom fit just about.
Take a bow, it’s coming along nicely!
Thank you very much!
Nice work and worth the time to get fair planking!
Absolutely!
Fred good to see you are watching sites and builders,
GUY, SMA
A master craftswoman. Mind blowing skills. Especially when you spread the putty with an Amex card.
Thank you! Yes, plastic cards are a very useful tool)))
You did very well with the compound angles, hard at first to figure out I know done a few of them for the Constitution. But you have done a much better job at them than I did. I can't wait to get my eyes fixed so I can continue, one day I hope to be just as good as you!! Thanks for sharing.
Thank you very much!
I wish you recovery!
I am so looking forward to seeing you do the planking on this one 😀
I also can't wait to start planking. But first I need to prepare her for this))) So I think there will be another issue before I publish the planking!
W ow......ich finde es toll wie das machen . ich selber habe vor jahren mit der Bounty angefangen und bin nun nicht mehr weiter mit dem Bausatz gekammen
Danke!
Ich habe auch Bounty)))
Ich bin begeistert vor ihrem Können. Respekt.
Danke schön!
Olga, I am inspired and somewhat intimidated by the excellence of your work. I am currently building an Amati kit of Vanguard. It is difficult and takes real patience to work at that level of detail and master the tools needed for it. Perhaps the most difficult part is understanding all the names of the various parts of the ship and its rigging. It's a whole new language for me and the instructions expect you to understand all of it. I was wondering what kind of preparation you had for your ship building work. It is a pleasure to watch your work.
Oh, I understand you well - I've been learning the terminology from the beginning - in English. This is a new language for me in the literal sense)))
But if you build and study in order, then everything is not so difficult...
Practice, small kits to start. Patience.
Da kann ich nur beipflichten. Baue selber die Bounty von del Prado. Bin mit der Takelage dran und muss noch die Segel nähen und diverse Restarbeiten an Rumpf und Deck ausführen. Der Bauplan von del Prado ist ein Witz. Oft auch noch falsch dargestellt. Maßstab 1 zu 47
Well done! Amazing craftmanship!
Thank you!
I am literally blown away by your talent Olha :o This is really an amazing work and it needs lots of patience and you just nailed it !! That hull looks just perfect. I am really impressed how this turned out and I can not admire you enough for that !!
Thank you very much!
I really want to make this frigate the perfect model - so I'm in no hurry to build her. I always have the same problem - not enough wood to fill the spaces and that's why I do it in part. But for this ship, I patiently bought a package of basswood once a month and filled all the spaces)))
@@OlhaBatchvarov I am sure this will be a real stunner, because I see you put all the work and love into it.
Wow, what a work ... but worth for another great model Looking forward seeing more! All the best for you and your loved ones for 2022!! 🥂
Thank you so much!
All the best to you too and happy holidays!
This is craftsmanship at its best. Awesome!
Thank you!
That's a lot of work!
But it was fun to cut pieces at an angle))
you are doing an amazing job, thank you for sharing your amazing work.
Thank you so much!
Geez, I wish I had your workshop.🙂
As always a lovely build, all the best for 2022.
Thanks, you too!
Beautiful Job!!!
Thank you! 😊
Nice model
Nice video
I think i can’t reach this level in five lifes
Brava!!
Ciao
In five weeks - hardly, but in 5 years - it is quite real...
Excellent work as always.
Thank you!
Happy new year great job!!👍👍👍
I just finished my hms victory thx for the tips and i made the figure head good
That's awesome!
Congratulations!
Looking great nice work
Thanks 👍
Olha wonderful work again can not wait to see the the planking stage next 🏆. Great work again Olha.
And a happy new year for 2022.
Thank you very much!
Apparently before the planking, there will be another video about the preparation for this process. I also need to prepare all the parts of backbone!
🥰georgous 🥰 and good job on the hull
Thank you!
I'm late to the show. Why the vertical planks in the middle of the hull ? Great watch !!
Welcome aboard!
This is the frames. This part of the hull will not be planked to show the actual number of frames!
Excellent work!
Thank you!
Grand Bravo merci pour cette belle vidéo
Mon plaisir!
Wow!!! That is looking great:)
Thank you very much!
Your work continues to shine, you are the best and most inspiring to watch.
Thank you so much 😀
Очень очень круто!!!! Не думал что женщины увлекаются карабельным моделизмом, весьма приятно удивлён! Творческих вам успехов!!! Подписался на канал!!!!!
Большое спасибо!
Буду стараться удивлять и дальше))
Thank you for sharing. One question...why all the 5mm slates running vertical on one side and not the other?
My pleasure!
Because the open part of the frames will be only on one side, on the other side everything will be planked...
Absolutely stunning and gorgeous. And the boat looks good too.😁😜
Thank you very much!
Спасибо за интересное видео. В свое время для малковки у меня был только сухарь 👌
Я рада, что вам понравилось!
Happy new year great job!!!👍👍👍
Thanks! You too!
Great work, great video!
Thank you very much!
Happy New Year everybody 🥂🎇
Good job Olha 😀👍
Happy new year to you too!!
Parabens....adoro fazer isso tambem ...sou do Brasil ja me inscrevi
Beautiful video
Thank you!
Olha, que trabalheira!...
Ficou ótimo e muito bem estruturado. Gostei muito.
" The sky's the limit so have your happiest new year yet! HAPPY NEW YEAR".
Feliz Ano Novo e boas festas para você também!
Olha, Why have you used Fairing blocks to fill inbetween all the fraims?
This model is with single-layer planking. So when filling the spaces, the main goal is to prepare the perfect surface for planking. But I also increase the gluing area, simplify the marking for the planks, have the ability to bend the planks directly on the hull with a soldering iron and nail (or clamp) where I need to and not just on the frames...
Non mais qul travail ?? Fabuleux !!...
Merci!
👌Your work is so amazing 👍
Thank you so much 😀
Awesome work
Thank you!
Happy New Year. I never miss an episode.
Thank you very much!
And happy New Year to you too!
С Новым Годом всех благ !!!
Большое спасибо!
Вас тоже с НОВЬІМ ГОДОМ!
awesome job !!! I was delighted to see it !!! I would like to try to do it !! but I don't have all these tools. I repeat, precious work. !! с новым годом 2022 !!! Feliz año 2022 !!!!
Thank you very much!
Yes, it's a really large model and needs a lot of tools if you want to make it really good!
Happy New Year to you too!
Fantástico! parabéns pelo seu trabalho!
Obrigado!
Оля, с Новым годом! Всего самого доброго! Берегите себя
Спасибо!
И вас так же с НОВЬІМ ГОДОМ!
Congratulations on your work ......I love to do this too .....I'm in Brazil .....I've already signed up ....I'm going to try to make one like it ......God bless you
Thank you!
Welcome aboard!
Why are you adding wooden blocks between the bulkheads?
There are so many benefits!
More importantly, the hull will not twist over time. Especially such a long model.
Second, it will be much easier (10 times) for you to arrange planking. Especially when it is only 1 layer of planks.
In addition, you have a larger area for gluing the strips, you can hammer nails with clamps anywhere or bend the planks directly on the hull with a soldering iron...
Olga, I am in awe of your skill set and attention to every little detail on each of your builds. Besides giving you freedom in anchoring hull planking, would you please share any other thoughts on why you prefer to fill the cavities between hull bulkheads?
And, may I add, I hope 2022 is a great year for you and your family.
Thank you very much!
But this is really only for the perfect planking! This not only facilitates the planking process, but also prevents deformation of the planks from changes in humidity, especially on such a large hull. This is a very boring job, but if you do not do it you will always regret just looking at the model. Now I live in a very humid climate and see my two models, that even for small hulls in this area I need to completely fill the space!
Olha, Thanks for explaining why the fill in between all your bulkheads! I am building the Artetestiana Latina Bluenose as my first wood ship model and I wondered why I needed a second layer of planking. Is there a Top Hamper to the USS Confederacy? Or is it just a Hull Model?
As a kit - this is just a hull. But I plan to do a reconstruction with masts and sails.
Very nice work. That is going to give you a near perfect substrate for applying the planking. 👍👍
I used to work on card stock ship models. One build was a scratchbuilt design I was doing for an online contest run by Dimitri at Digital Navy. To fill the spaces in the ships framing I used pink insulation foam.
Thank you!
Yes, I also use this insulation on small models that are veneered.
Your skills, knowledge, and techniques are inspiring. It's been ten years since the last ship I've built. After watching the first three videos of this build, today I started my next build. Keep the videos coming.
Oh sorry, I'm not subscribed... And now that's corrected.
Welcome aboard!
I'm glad you liked my content!
Have you ever built any steam sloops like the USS Kearsarge or the CSS Alabama.
Not yet)))) but I really like Alabama!
Intricate work, great to watch 👏 Thanks 😉
Health and lots of good luck in the new year from Berlin 🎁
Thank you!
Happy New Year to you too!
Superb !
Hello Olha. I am very impressed with your work. You are my inspiration! A question: what size of wood blocks did you buy to make the filling pieces between bulkheads, and where did you get it? Thank you in advance
Such blocks can be found in craft stores. I took a bag with different thicknesses, because the distances between the bulkheads are also different...
@@OlhaBatchvarov Thank you very much. I am to receive this kit tomorrow. Didn't you make any more videos of this kit past #10?
a happy new year 🎆 🥰
Thank you so much!
All the best to you too and happy holidays!
@@OlhaBatchvarov ❤️
How many hours, days, weeks or months would it take to build this? How long did it take you?
I can't count the time clearly for this ship because it's too big and I run out of wood all the time - so I just spend more time waiting for materials than building her. I think if I built her every day it would take at least four months! And in fact - I opened the box with the kit a year ago)))
Very nice , what is the brand and model of your table saw ?
Thank you!
This is 4'' Table Saw - Byrnes Model Machines
I will put a link in the next comment on the video about it, if UA-cam does not block. There is a seller in the description under the video!
ua-cam.com/video/ge_OTqQXSfY/v-deo.html
@@OlhaBatchvarov thank you , it look a very good saw
Great build. I have a question.
Why did you make a "solid " hull as opposed to frame and plank? I understand it would be more solid ( and heavy), but did the blocks really make it easier to cover?
Thank you very much!
There are many advantages to this! The most important thing is that it will make the planking process 10 times easier. You can bend the planks with a soldering iron right on the hull and also nail the clamps where you need!
Secondly, you will get a perfectly flat surface and it will not deform over time (usually after a few years the location of the bulkheads and the concavities between them become visible).
С Новым Годом!!! :)
Спасибо!
И вас с наступающим!
You madam are an Artist....
Thank you!
1:10 be careful with kickback please. But your videos are art. So beautifully made.
Thank you!
Outstanding
Thank you!
How often do you post and where are you going to work on the confederacy again?
At the moment, I'm cutting the planks for this ship, as I'm going to replace those that come from the basswood in the KIT with the precious wood. And when I make the planking, I will publish the next video - it's a big model and takes a lot of time...
Oh oh now I need a scroll saw!
Did Model Shipways instruct filling the hull with solid wood? I did this on their Niagara, did not like the idea of complex single planking. Some day I need to finish that ship, it is actually a very hard kit, lots of real fabrication.
This is a similar technique as in most of their kits. And the same single planking. But I will use hard wood and bending the planks with a soldering iron directly on the hull, so I definitely need to fill the spaces...
That is my plan actually.
@@OlhaBatchvarov thanks for reply
Why do the hull need to be solid wood?
Many advantages:
- larger gluing surface
- it is easier to make planking on an already properly shaped hull
- this model has one layer of planks
- you can also drive nails where you need to clamp the plank, not only on the bulkheads
- and the most important thing is that you can bend planks with a soldering iron directly on the hull
@@OlhaBatchvarov Balsa is expensive these days since much of it goes to make wind turbines. Must cost like 100 euro the amount you used here.
can balsa wood work?
Balsa can be used for small hulls that are planked with veneer. But for skeletons with large gaps between bulkheads, it is better to choose a basswood. Basswood can holds nails well unlike balsa. Also with basswood I can bend the planks right on the hull!
Вітаю Вас. Погано було видно фірму на пекеті(там де Ви діставали дерево на шпаці). як називається виробник, чи є сайт?
Це з супермаркету для хобі Басвуд. Американський аналог нашій липі.
To think back in the wooden ship building days these were made completely by hand, no power tools, and no laser cut parts. I know I would not want to do it that way, tough enough even WITH power tools. I can never seem to get past the hull into planking. I have only one hull fully planked, and it looks like crap. Started a Victory and got to the planking stage and of course messed up the lines for the setting planks. The only one I have built that actually is looking good is a Dumas Chris Craft, i'll leave doing the classics to those who can build. Amazing work here .
Thank you very much!
I know that feeling with planking! On my VICTORY, I probably tore off the planks three times and started over, oh no - I finished her first planking on the 4th try! So with that hull, the iron was my best friend))) And probably a whole bottle of PVA was spent there!
@@OlhaBatchvarov I made the mistake of using CA. No going back with that unless I soak the whole thing in Acetone. :( Live and learn, they are nothing like building an RC airplane. LOL
Prueba a realizar el barco de primera línea "Santisima Trinidad".
Ya construí uno de estos - VICTORY
Si que es muy parecido. 😁. Yo estoy ahora mismo con velamen del Santísima Trinidad y pensando en cuál va a ser mi siguiente barco.
I don't get it, no planking? why?
Because here is one layer of planks on the model! And if you want to make them correct and most importantly fair surface on such a large hull with large distances between the bulkheads - you need to completely fill the spaces. Otherwise, the planking over time from the change in humidity in the air will begin to deform and there will be dents between the bulkheads!
@@OlhaBatchvarov Ho, I see now. Thanks!
What’s that two-part filler please?
This is all purpose putty.
This is the original jar as on 19:16 min in the video.
@@OlhaBatchvarov Thanks. I did see that but Bondo isn’t available here. I was wondering if it was epoxy or something so that I might be able to find an equivalent here.
Ай молодца!
Спасибо!
Красота!!!!
Спасибо!
Just impressive
Thank you!
doesn't all that extra wood add lot to the weight of the model?
These 300 grams of Baswood are nothing compared to the heavy plywood from which the model's skeleton is made. But the planking will be 10 easier to do and the planks will not deform over time from changes in humidity!
Very good! I understand why. But I’ve never fully filled a hull prior to planking. I do see several advantages to planking a basically solid hull. Your videos are great. But can you explain why you make this step? As you know, I have this kit in my shop. It is not next, but I am considering filling hulls with my next build Niagara from Model Shipways. Confederacy may be next… THANK YOU OLHA!!
Thank you very much!
This not only facilitates the planking process, but also prevents deformation of the planks from changes in humidity, especially on such a large hull. This is a very boring job, but if you do not do it you will always regret just looking at the model. Now I live in a very humid climate and can see on my two models, that even for small hulls in this area I need to completely fill the space!