After drilling the holes you can get a brush on touch up paint and apply a good thick coat. let it dry and then attach the spoiler. this would minimize the possibility of rust.
Sorry to be so off topic but does anyone know of a method to get back into an Instagram account..? I was stupid lost the password. I appreciate any tips you can offer me.
@Terrence Lukas thanks so much for your reply. I found the site on google and im in the hacking process atm. Looks like it's gonna take a while so I will get back to you later with my results.
I was so looking forward to doing this. After learning i have to drill into the car to do it, it's not happening. I figured it was direct bolt on. Oh well
The holes there already, are they known to leak and put water into the spare tire area ? My caps seem loose but won't come off easy, just wondering if I should pop off and seal right ? Thanks.
Your Honda dealership has paint pens. I guess it cost around a dollar or two. It has 2 tips . The paint tip and a clear coat tip. Some dealers will give it to you free. Or you could get it from a paint shop. You can find the paint code of your Honda on the driver side B post. For example, NH737M is polished metal metallic, which is the metallic grey Honda. To be honest the color do not matter as it is covered. Yes, the installer should have painted the drill hole. Good catch.
This spoiler installation is too complicated and looks damn ugly. There is another spoiler with led light strip on ebay for 50 bucks that's a direct fit to the 07-11 CRV. They use hooks in the place of screws to hold the spoiler onto the wing, pretty brilliant. You just need to drill one hole on each side and the location is already marked along the inside top edges of the rear door. As a matter of fact the holes are already half drilled, I only used a hand screwdriver in the entireprocess. The led connection is also a breeze, you just need to unplug the rear door light and connect it to the spoiler's led cable. Honda showroom is a rip off they charged $175 + Taxes for the spoiler and $250 + Taxes for the installation. The spoiler they showed was the ugly one as seen in this video. I managed get it done all at $50.
www.ebay.com/itm/2007-2011-Honda-CRV-CR-V-M-STYLE-LED-Red-Top-Brake-Spoiler-Wing-Bodykit-Lip/191224357102 Try looking for ones in this design, it fits amazing. Put a 2 inch 3M double sided tape all over the area where the spoiler touches the tailgate. Its been over an year, no issues whatsoever.
After drilling the holes you can get a brush on touch up paint and apply a good thick coat. let it dry and then attach the spoiler. this would minimize the possibility of rust.
Sorry to be so off topic but does anyone know of a method to get back into an Instagram account..?
I was stupid lost the password. I appreciate any tips you can offer me.
@Terrence Lukas thanks so much for your reply. I found the site on google and im in the hacking process atm.
Looks like it's gonna take a while so I will get back to you later with my results.
@Terrence Lukas It worked and I now got access to my account again. I am so happy:D
Thanks so much, you saved my ass !
@Ryder Ismael you are welcome =)
Just did one today fairly an easy job with out template as bought spoiler second hand
I was so looking forward to doing this. After learning i have to drill into the car to do it, it's not happening. I figured it was direct bolt on. Oh well
I thought the same thing...
Same.. don’t want to drill any holes
@@xterra951king same, but i bought one anyways and will do it today
Nice bro 👌🏼😍😍 asi le quiero poner a mi honda crv 2007 😍😍😍🙏🏼
The holes there already, are they known to leak and put water into the spare tire area ? My caps seem loose but won't come off easy, just wondering if I should pop off and seal right ? Thanks.
Does it leak after drilling holes?
Can u please send me the link to get this spoiler with all the hardware and screws
Can you make a video for spoiler installation of 2017 isuzu mu-x
Both links on the descripción bottom not working please insert a working link ..
I would like to install spoiler for my Honda pilot 2012 model? Please help
Do you have a Video on installing Spoiler, Tailgate YR620M Part# 74901-TLA-A02ZA?
Hello, the part that you took off. What is the name of that piece?
what about rust on the holes?! i would better drive without a spoiler...
Your Honda dealership has paint pens. I guess it cost around a dollar or two. It has 2 tips . The paint tip and a clear coat tip. Some dealers will give it to you free. Or you could get it from a paint shop. You can find the paint code of your Honda on the driver side B post. For example, NH737M is polished metal metallic, which is the metallic grey Honda. To be honest the color do not matter as it is covered. Yes, the installer should have painted the drill hole. Good catch.
How to I take the spoiler off? I need to put my bIke rack on and the only thing it can clip to on the top is the spoiler:(
do you have a video how to install a push bar for honda crv 2011?
how much does the HONDA DEALER charge if i take my CRV for them to Install a Spoiler
Nissan quoted me $500 for similar install.
someone can give me template/ or send a 1:1 picture?
No protection code fa16? Fa 10 on drill points. Corrosion!
Where I found the clip to hold the spoiler
I had a spoiler fitted to my CRV when I took delivery in 2014. Can this spoiler be transferred to a 2016 new model?
jan bannister it should
I need to replace my hideous beep-beep sounding horn on my 2011 CR-V. We need a video! Can anyone help?
has anyone got a template they can send me or a link i can get the dims making one for the fixing holes got a second hand spoiler coming today
How to instal the rd1 nerf bars?!
Tem para crv 2011 pfvr ou sabe onde comprar ???
Pratico vlw
the technician did not ware safety glasses.
nor did he use a drill stop on the bit.
This spoiler installation is too complicated and looks damn ugly. There is another spoiler with led light strip on ebay for 50 bucks that's a direct fit to the 07-11 CRV. They use hooks in the place of screws to hold the spoiler onto the wing, pretty brilliant. You just need to drill one hole on each side and the location is already marked along the inside top edges of the rear door. As a matter of fact the holes are already half drilled, I only used a hand screwdriver in the entireprocess. The led connection is also a breeze, you just need to unplug the rear door light and connect it to the spoiler's led cable.
Honda showroom is a rip off they charged $175 + Taxes for the spoiler and $250 + Taxes for the installation. The spoiler they showed was the ugly one as seen in this video. I managed get it done all at $50.
Harish Kumar can I get the eBay link to that please. Thanks!
www.ebay.com/itm/2007-2011-Honda-CRV-CR-V-M-STYLE-LED-Red-Top-Brake-Spoiler-Wing-Bodykit-Lip/191224357102
Try looking for ones in this design, it fits amazing. Put a 2 inch 3M double sided tape all over the area where the spoiler touches the tailgate. Its been over an year, no issues whatsoever.
@@1987harish Thanks! Just ordered...
can you please share the ebay link