Power Steering leaks! Fixed! Flush and Pump Rebuild - Part 1 - 1999 Honda CRV

Anti-Seize: amzn.to/2YcxRtj1997-2001 Honda CR-V Power Steering Leaks.
In this video, I address the power steering fluid leaks that's been bugging me for a while. I flushed the old fluid out and replaced all the seals inside the power steering pump. I also replaced some of the hoses and clamps where visible leaks can be seen. I made 2 parts to this video. Part 1 is about power steering fluid flush and pump rebuild. Part 2 is about replacing some of the hoses and clamps.
**Please be responsible and dispose old fluid properly**
Power Steering Fluid: amzn.to/330wFtN
Pump: amzn.to/2OsnQ6N
Clear tubing: amzn.to/341PoGB
Power Steering Repair Kit: amzn.to/2OvYjK3
Clamps: amzn.to/32ZoVIE
Hook Tool Set: amzn.to/2O0RGQW
Anti-Seize: amzn.to/2YcxRtj
OEM Parts: www.hondapartsnow.com/resourc...
OEM Power Steering Pump O-Rings: www.hondapartsnow.com/resourc...
www.hondapartsnow.com/
Thank you for watching!
DISCLAIMER:
This video is produced for information. Use this information at your own risk. Due to factors beyond the control of H0Me LYFe, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, property damage, or loss that may result from improper use of equipment, or information obtained from this video is the sole responsibility of the user/viewer and not H0Me LYFe. Always consult with a professional if your uncomfortable or not sure about a particular job, work, or project your working on.
**This video and description contains affiliate links, which means that if you click on some of the products on the description links, I'll potentially receive a small commission at no cost to you. This will help the channel to provide more content like this one (like buying more parts). I deeply I appreciate it and THANK YOU for your support!**

[@hasanakdemir5911]

A very useful video. Without hiding the information, without showing off, the repair video can only be this much.

[@h0melyfe792]

Thanks! Appreciate it!

[@mikeb1952]

Thanks for the video, changed the seals in my daughters CRV today and it helped immensely.

[@h0melyfe792]

Your welcome! Glad it helped!

[@ulisesvazquez9789]

Great video . Hint if remove pipe to pipe clamp first nearest the rack then remove hose to reservoir . Remove entire hose assembly and makes it easy to get to the hard clamps u can’t reach . 🤙

[@h0melyfe792]

Thanks brother! I’ll definitely try it out next time. 👌

[@BooMchanify]

Great job! Definitely helped out and was informative. Keep up the great work.

[@joeywippledo9028]

This helped a TON! Thank you!

[@godfirst6880]

Thank you! I saw another video about rebuilding this and was kind of nervous about the part where the little metal plates fall out...but you made it look easy. I'll try and do this, this week! Thank you again brother!

[@h0melyfe792]

Your welcome! Let me know how it goes when you tackle it. Hardest for me was removing the bearing…would’ve been easier with a table clamp holding it down. 💪💪💪 you got this!

[@acewarren14]

Thanks for this video Sir a very informative tutorial
Thumbs up

[@h0melyfe792]

Thanks for watching!

[@beschken]

thanks for the video! steering is stiff, softens when accelerating. Any ideas?(CR-V RD1).

[@nyambemundopu1168]

How can I replace the Power Steering Rack Seal Kit for 1st Generation Honda CRV (1997
- 2001 Honda CRV RD1)? There’s excessive play in the steering system. The steering wheel is loose, “has play in it”; ATF is leaking from the steering rack.

[@4dtruth192]

Is the AT-205 RE SEAL STOP LEAK good for honda crv power steering? Thanks.

[@derekwilson8011]

Mine's been leaking for years not too bad would that cause it to be spongy feeling getting air in the line

[@itsjiraheta]

5:17 what is the part number for that rubber seal? BTW, thank you for the video and your time to do this. Really helped me out.

[@h0melyfe792]

Jose Iraheta Portillo.. I checked 5:17.. not sure which seal your referring to.. and your welcome! Glad it helped you on your project.

[@itsjiraheta]

@@h0melyfe792 My bad it was 15:17 was missing the 1 at the front

[@h0melyfe792]

www.hondapartsnow.com/genuine/honda~seal~power~steering~91249-p2a-003.html

[@h0melyfe792]

Jose Iraheta Portillo.. try that link.. it has the diagram of the pump..

[@notSusNugget]

How much does all the oem genuine gaskets cost in total from the dealership?

[@isaiaslovos1994]

What is the part number of the bearing?

[@abou3amar]

bonjour, j'ai une cr-v 1999, avec une fuite au niveau de crémaillère, j'habite au maroc

[@erolguleryuz5366]

👍

[@h0melyfe792]

Thanks 😊