Is the E46 maybe the worst BMW ever made ?. Wy would you even consider buying a car that needs that much done to it. Its like buy the car and a 2 post lift and a course in Car mechanics 😂.
This one of the most interesting and best parts of concen on E46 casis. I'm so glad you guys are doing such a good job on this fairly big project. I'm not sure that the Vince bar is easier to install but I think it is stronger looking. Great job!
Still think BMW should be held responsible for and pay for all of this work.It makes the car a danger to all drivers,and they have made enough money out of them. We have had over 20 BMW's between us,but no more,and l hope a lot of others do the same until they decide to recall and fix all of these cars..AUDI from now on for all of our family,and that is a lot of BMW's.
Nice work, installation of the that bar v bar is clean rivet and bolt..... you will tell the diffident on your first turn of the car will hold the road/hwy/street better ... way to go !!!!
Selena,wouldn't it be more profitable to work on higher value cars such as porsches and lambos ? You will basically still be a grease monkey but less busy and make more money as those dealerships charge a leg and an arm. I understand that you have mastered the BMW e46 but for how long ? I might be wrong. What is your view on this ??
How you know Lambos more profitable? There are tons of BMW cars driving around. I don’t see any lambos on the street. Keep up the good work and you will find a way. I can see you are going to be successful.
future refernce @3:36 use a heatgun and just scrap it all off instead of using a rotary tool and wasting so much time
Is the E46 maybe the worst BMW ever made ?.
Wy would you even consider buying a car that needs that much done to it. Its like buy the car and a 2 post lift and a course in Car mechanics 😂.
In the earlier video, you mentioned an x type cross brace to tie in the sub frame. Are you still planning to do a video on that?
Hi how are you I would like to now where can I get the vince bar for my e46 ?
that 3m epoxy is good stuff. If thats a very high strength steel reinforcement, it's better to epoxy than to mig
@a as strength wise i think its just as strong as welding if not stronger in fact
Hi Selena 👋👋 Good job!!! 😉☺👍
Thank you!
Here you are doing all this extensive fab work, and my bitch ass is afraid to do the timing belt on my frontier on my own lol☺️😉👍🏽
3:47 Love her or hate her you gotta admit she's grinding some mad beats!
Look who is back 👍🏼
haha I know right!
Where can I get that reinforcement kit
Nice!!! She's back!
did you go to nc. state? that's where my dad went to school. don't forget to give me a shout out.
You still haven't told us where to get the damn kit from please i need to know.
This one of the most interesting and best parts of concen on E46 casis. I'm so glad you guys are doing such a good job on this fairly big project. I'm not sure that the Vince bar is easier to install but I think it is stronger looking. Great job!
No reason to use the Vince bar when you can purchase the mason rear x brace
damn that's alot of work for the car lol.
Where can i buy thay 3m epoxy
Nice Work. Greetings from Germany
Reppin the Wolfpack 🐺
Looking good and good luck on the Math test.
Woo progress
Over engineering for the win!!!
So. How did you do on the math test?
Nice!
How'd you do on the math test?
Progress slowly but surely! 👍🏻
That headliner tho lol
No part 3?
Still think BMW should be held responsible for and pay for all of this work.It makes the car a danger to all drivers,and they have made enough
money out of them. We have had over 20 BMW's between us,but no more,and l hope a lot of others do the same until they decide to recall and fix all
of these cars..AUDI from now on for all of our family,and that is a lot of BMW's.
Do they have a Vincebar for the 2006 E60?
Can u drive manual
i dont have anything againce this epoxy product but dont u guys think this would be way way stronger and better if was welded
great work anyways
Nice work, installation of the that bar v bar is clean rivet and bolt..... you will tell the diffident on your first turn of the car will hold the road/hwy/street better ... way to go !!!!
1 step closer to completion Selena, good luck on your Math test as well ! Cheers from Australia :)
Good luck on your Math test. Don't work so hard, it is always great seeing you guys. Lots of love from Toronto Canada.
you could have heated that sound deadening whit a heat gun and used a cutting knif and also a spatula
Looks good, the vince bar seems like the better way to go as it does not effect the truck space...looking for part 3 of this series
The grinder sounds like it was autotuned. 😂😂😂😂⚰ great vid👍
I missed you so much. 😘🚗
Good girl using the adhesive. I was getting worried
Looking good. Can't wait to hear it. You should drift it.
I’m glad ur back but the back round music
Great job! And good luck with the Math test!
Love your work. Very detailed, thanl you
I love the way you work with Passion
It's probably kinda useless tip now, but you can soften this black sound dampening thing with brake cleaner. It goes off much easier :)
It wasn't that hard to take off it melted off quick
Lots if progress. Looking good!!!
Should of welded it! Epoxy is great, but not as good as welds!
Not true at all
Invest in a putty knife?
Ya era hora Selena, pensaba que te olvidaste de tus suscriptores jejej.
claro que no jaja
Once again Selena great vid
Nice! Hey good luck on your math test!
Thank you! :D
JASON GOT A REAL ONE
Selena,wouldn't it be more profitable to work on higher value cars such as porsches and lambos ? You will basically still be a grease monkey but less busy and make more money as those dealerships charge a leg and an arm. I understand that you have mastered the BMW e46 but for how long ? I might be wrong. What is your view on this ??
I do not work on customer cars I only work on my cars :)
BMWselena Thanks for replying 😊
It's just food for thought for you and your hubby
How you know Lambos more profitable? There are tons of BMW cars driving around. I don’t see any lambos on the street. Keep up the good work and you will find a way. I can see you are going to be successful.
5th
👄👄👄👄👍👍👍👍
💖💖
Nice build but y'all taking to long ;(