BMW S63/N63 Must do DIY - Oil Pump Chain | 4K

Parts Needed:
(1) Lower Pan Gasket # 11137566808 ]www.fcpeuro.com/products/bmw-...
(25) Oil Pan Bolts # 07129909333 www.fcpeuro.com/products/bmw-...
(6) Reinforcement plate bolts(Do not reuse, these are one time use only) #33306772888 www.fcpeuro.com/products/bmw-...
Gasket Tack:
www.amazon.com/Permatex-80064...
Tools Needed
Torque Wrench
Torque Wrench Angle Gauge
Cordless Ratchet (highly recommended, 31 bolts to remove and reinstall)
3/8" extensions
8mm long reach hex socket
T45 Torx socket
E10 External Torx socket
16mm Socket

[@lochlanmckenzie8992]

Nice job mate! great tutorial. it's about time you get those Rod bearings replaced. Unfortunately my e71 X6M decided to spin a bearing at 168,000kms so I highly recommend doing it. haha

[@djlazarek5830]

Those are some bad ass wheels

[@user-di4px5qg4h]

very helpful thank you

[@timcallahan1055]

Nicely done! I just picked up a 2018 F85 w/37k miles. I will keep this in mind for the future.

[@E70MGarage]

Thanks, and congratulations!

[@Driven_Life]

For the n63tu do you know the torque specs for the rod bolts

[@farturinn]

I have re-used my reinforcement plate bolts multiple times, probably not a good idea :D

[@E70MGarage]

I have too 😂 but it's not a good idea. Bolts that have tightening torque and degrees specs are stretched or de-shaped - may appear to be the same to naked eye, but aren't.

[@Nohchi777]

Hi, how 0-100 time?

[@philliesclips7348]

Do you have a transmission tune?

[@E70MGarage]

Nope, not yet!

[@SageXteriorCleaning]

About to do this on my 2014 550i. Did you end up buying new reinforcement plate bolts? Since they’re one then use. Also, how are you able to measure how many mm of slack you have.

[@E70MGarage]

I didn't replace the reinforcement plate bolts, but you're correct - they're one-time use only. I eyeballed it, 6-12mm is about 0.2-0.4" but you can find specialty tools to measure the slack from eBay.

[@karannanda6517]

Have u ever timed ur 0-60? How much whp?

[@SageXteriorCleaning]

@@karannanda6517 it’s supposed to be 4.5 seconds

[@karannanda6517]

@@SageXteriorCleaning "supposed to be" he's stage2+

[@MVaccaTTACK]

Any symptoms or noise that made you aware of this

[@E70MGarage]

There was a chatter/rattle for 10 seconds or so at cold start, it's still there but fairly less.

[@RubenLindgren]

'Promosm' 😔