How to start mobile detailing business using your small personal vehicle | Building your ‘sedan’ Rig
Вставка
- Опубліковано 6 лип 2024
- • REVIBE AUTO DETAIL •
Instagram : @revibeautodetail
Facebook : @revibeautodetail
Website : www.revibeautodetail.com
Thank you guys for watching this video.
I hope you guys like the content i put out there.
Please don't forget to Like, Share & Subscribe!
Here are the links you will need to build the same setup.
Please send some love if you appreciate the content and wanted to support my channel.
-------------------------------------------------------------------------------------------
LATEST PRODUCT LINK WILL BE IN MY LINKTREE
-------------------------------------------------------------------------------------------
linktr.ee/revibeautodetail
-------------------------------------------------------------
WATER TANK PLUMBING SYSTEM
-------------------------------------------------------------
Flexzilla Garden Hose
amzn.to/3ifOyTf
90 Degree Elbow 1/2" NPT to 5/8" Barb Hose
amzn.to/3GoNeFv
5/8 Tee Barb w/ Clamps
amzn.to/3CuZCCL
Garden Hose Shut Off Valve
amzn.to/3jZ1j52
1/2 Shut Off Valve
amzn.to/3DIj53y
Quick Connects
amzn.to/3CuDDvE
-----------------------------------------
REEL SETUP
-----------------------------------------
Complete Pressure Washer Reel
amzn.to/3Btbzsa
OR
Retractable Reel
amzn.to/3H1nMpL
Pressure Washer Hose
amzn.to/3YqtcBx
3/8 to M22 Hose
amzn.to/3IyoSdt
3/8 to M22 Fitting
amzn.to/3ZE9RhB
---------------------------------------------
RIG MATERIALS
---------------------------------------------
33 Gallon Water Tank
amzn.to/3PgNdHQ
Flexzilla Air Hose Reel
amzn.to/3hj8EeA
Flexzilla Pressure Washer Hose
amzn.to/3WElL9h
Ryobi 1800 psi Pressure Washer
amzn.to/3jfYZX0
Flexzilla Electric Cord
amzn.to/3YMGGZS
Pulsar Inverter Generator
amzn.to/3FFEU53
Ridgid Air Compressor
amzn.to/3hYu9lf
Ridgid Vacuum
amzn.to/3UN1SLV
Ridgid Vacuum Hose
amzn.to/3hfmQWb
McKillan's Pressure Washer Gun
amzn.to/3FIa63v
Metabo Air Compressor
amzn.to/3FKsl8C
McCulloch Steamer
amzn.to/3Yc7and
Wireless Remote Switch
amzn.to/3iTsIES
Surge Protector
amzn.to/3YhQ1s8
--------------------------------------------------------
TOOL WALL MOUNTS
--------------------------------------------------------
Foam Cannon Mount
amzn.to/3jt99nn
Tornador Mount
amzn.to/3YOS2em
Pressure Washer Gun Mount
amzn.to/4274tp3
Quick Connect Flange
amzn.to/3GeS8pP
--------------------------------------------------------
Love that you actually show some of the plumbing work ! Keep doing more builds ! 💪🤙🏻
You're like the only one who shows this process. Thank you so much!
Looks awesome. Very clean and professional. Everything has its place. Great job!
Thanks for helping us out bro. Working on getting my setup complete but having a lil trouble getting some fittings out here in El Salvador. All going in a 2009 Nissan Sentra.
Thanks to your video I just did the same mod for my Amazon air hose reel to pressure washing conversion 💯💯
Great work! Clean and professional looking.
I will be building one like this to fit in my STI and then I will start my journey of mobile detailing and being my own boss… thank you for your knowledge, brother…
Hey man I’m building one for my wrx. Good luck too you
How’s it been for you two. Hope all is well and I hope you guys actually started your journey and not given up
Slamming Set Up. Keep up the great videos.
Garcia's Automotive Detail
Tucson Az
It's really nice getting step-by-step instructions from another Ryobi junkie! 👊😄😉😚😎🇺🇸
I'm actively trying to start a detailing business out of the back of small crossover, you are an awesome person for making these videos man. I can not tell you how much I appreciate you.
Good job!! Awesome vid brotha!
there is no waste in this video thanks for sharing 👊🏽 .
I just subscribed to your channel. The build looks great. Thanks for sharing your knowledge. 🎉
Thanks for post, very well done, very informative
Really enjoyed how you describe in detail and listed parts and equipment
Thank you so much for uploading this video and for all your time putting this together. This is going to help so many guys and gals. Please remember to add this one to your favorites. Super clean job and setup. Your first impressions are everything!. I've been at this for 50+ years and I can tell you that you have about 3-4 seconds to make that first impression. Show up clean, ON TIME, organized, and wear hats, shirts, and pants/shorts that display ONLY YOUR COMPANY LOGO! Become the advertisement for ONLY your business. Never Nike, Budweiser, NFL, etc. (unless of course you're being paid $millions to do so because you ARE IN FACT advertising for them). You can make upwards of $100,000, but you must be professional. Underpromise your services and overdeliver! Do not be the lowest price in town, your customers already passed on them and besides, those customers that want the lowest price tend to be the ones that complain the most. Again, Thank You for your video, and have a Happy 2024 New Year!!!
Man, you’re giving great information. This is super helpful for me.
Thank you 🙏🏻
@@revibeautodetail how much
Ive been waiting for this video, thank you
wassup brother G!! awesome video fun to watch
pinoy detailer here!! great video lods.. hope to get a setup rig like this one day lol.
Great setup!
I’d like to see a video on how you have everything else in the car. Like your wheel brushes, buckets chemicals. Surely you have to go back and refill if you don’t have your gallon chemicals to dilute. Also steamer and a stain extract like a bissle
Hands down to this video 🙌🏻 you know how long I’ve been looking for a video to show a diy pressure washer skid without using all types of expensive equipment. I never leave a comment on videos but this is a must. Great work with talent. Straight to the point with details THANK YOU VERY MUCH 🙏🏼
Thank you so much brother! 🙏🏻
Same 🔥
Same
@revibeautodetail8044 Where you get that board from that's attach to the water tank it's not in the description.
Awesome set up :) champion!!!
thank you!
Bro I need to see a detailed video on that prius setup I have the car and half the stuff already. Thanks for these great videos!
I love your setups, I would love to do one for my Honda Pilot 2005 one day
Amazing video man
Good stuff!! Great tutorial and knowledge 🙏💪😮💨
Much appreciated
Nice setup, much success in your business
Thank you!
Great video bro. Amazing. You got some good energy too. I hope to someday setup my Honda Fit.
I would love to setup a fit!
Great video .watch it couple times to see how it's done . 👍 What wood or piece you use for bases and you paint it ? . How is gravity feed working out for you ?
Appreciate you i will be doing this exact same thing
Exito carnalito.
Pure talent... great setup enjoy watching
Thank you so much!
Very good videos and Thanks,,,,I learn a lot...
Nice set up really helpful but do you have links to the PVC fittings both elbows and reduced I can’t seem to find them in my local home depot
Great job
Thank you for this DIY video! 🍻😎🫡
So good!
Great video! Thank you
Thank you!
You can even buy a storage deal. For the top of your car. And use it for storage also. That’s what I’m going to do for my Prius.
Yeah i have that idea too, but I haven’t bought them yet but i will soon! 😁
Good job
This man has his game on lock.
Thank you Sal! 👊🏻
such an underrated channel! 50km subs tbh
Impressive how you made this happen in a 300! Nice work!
Thank you!
This is awesome! I love your creativity!
How do you get customers? Do you do mail marketing?
Can you post a video of the Ryobi having a consistent pressure flow by just being connected to the water tank?
I saw in your old video where it had the breather valve on the tank. Do we need it for this set up and if so can you please share a link? Thank you!
Thanks for sharing. What is a ballpark figure for this setup? And how do you power this rig using retrofitted alternative car power?
Just subscribed. Think about downgrading my tank and pressure washer to be more low profile. I have a 2300 ryboi and a 50 gallon tank.
Can you do a test on the water pressure do you need a pump to feed the power washer?
We need you in California 👍🏼👍🏼
i am in Oakland CA brother!
Hey excellent content. Quick Qurstion. what are the actual sizes of the 2 elbow pvc fittings?
Salamat!
love
Hello, good morning, I like your videos and I liked the configuration. For the Prius, do you have a video on how to install it from the beginning for the Toyota Prius.
Awesome setups. I redid my focus hatchback based off of your designs. But warning these water tanks don't like being stood up vertically like in the Prius. The sides bulge like crazy under the weight of the water. Just a heads up. Still super nice setups tho guys. Everyone thinks you need a huge van. You don't at all.
Thanks man! About the tank i put good amount of support on the bottom of that tank coz i know it will happen 😁 thank you again!
@@revibeautodetail I read these tanks need to be vented. How do I do that.
@roflips6314 I would guess you open the shut off valve for your fill side while using the pressure washer. But not sure how to vent while filling. The one in the prius had a vent but it was standing.
I'm designing a trunk setup for my 4Runner with a 40 gallon classAustoms tank stood vertically. Does your tank seem like it might break from being stood vertically or is it good to go?
@@PlayerUnknown05 its definitely not meant to be vertical. The side bowed out and the top was collapsing under the weight. I've turned mine horizontally now.
Nice neet work, I maybe in touch for a set up on a Rav4
I’m trying to put this set up in my 2018 Buick regal sportback
Do you not need a pump inbetween the tank and pressure washer? Does it just use gravity feed?
I have a question about the water tank. How do u keep it from pressurizing and exploding when using and filling. Do u just leave one of the valves open?
Starting working on a project using your design.... The conversion is actually smaller then the sedan. ... It'll be put in a mustang . I do however have some questions relating to the wiring and if there are any items NOT listed in the description. If you can get back as soon as possible it would be a great help!
Im new to all of this but how would you fill up wash buckets using this plumbing setup?
Awesome video
What was the size of the reducer
Very nice and simple setup. I love how minimal it is. I am thinking of doing this in my Honda Element SC. What type of wood did you use for the base?
3/4 plywood
Do you have links to the straps you used to secure the pressure washer and water tank? And those little silver screws that go into the wood for the straps. Thank you!
Can't find the hose converter anywhere. Only 3/8 appears ,any suggestion?
Great video I'm doing this build on my Corolla, quick question whats the size of the PVC reducer?
1/2
Awesome. How do you do the setup. Base on car models and how much is the cost for everything shipping and made of the equipment?
How does the tank vent when filling ?
Lovely Setup Bro ... Is this like a gravity fed system ... I can't see any pressure pump in between the water tank and the pressure washer ...
Yes it’s gravity fed.
Can you do a video on how you made the promotion sticker for your car please
What size of the bolt you used for the mounting of the power cord retractor?
How is the tank vented? The website shows not to have a pressurized line (such as a garden hose)?
Or how may I modify the tank to allow an opening where I can fill it up by just pouring water in through the top of the tank? Is that possible? Thank you!
Curious to know how much are you in it after buying all the parts and how much with the labor to put it all together out the door for someone
What size is the reducer ??
Gonna build this in a 05 Acura tl
Hi thanks for tutorial videos, are you able to put links for these items for home depot. Greatly appreciate it if you can
Do you have any problems with gravity feeding the pressure washer? Is there any recommendations on gravity feeding?
No never had an issue.
The Driver trippen
We’re can I find the 3/4 compressor jumper hose to M22 fittings at ? For the pressure washer reel ?
Can I swap out the Ryobi pressure washer for the Active 2.0 and will it still be compatible with the parts on your list
awesome video!
-What's the screw eyes size by any chance? I couldn't see it on the package and in Canada they don't sell it in packs of 2 unfortunately.
-What's the size of these 3 wooden pieces that hold the Water tank, please?
- How many Gorilla Black Spray did you use to paint this Plywood? :)
Hi mate, I was wondering what is the final height of the tank once set up ? I work out of a 2014 vw passat and have no room for messing around. The measurements of my boot(trunk) is Length 45inch width 40 and max height 18i.
BTW i love this set up, by far the cleanest I have come across in my years of doing this.
If you measure the thickness of the plywood plus the thickness of of the 2x4, assuming you add those, you can minus that from the avaliable height for your tank.
If you're going to build this you're going to have to figure stuff like this out. You have a good start though because you know the dimensions of your boot. I would double check your measurements though. Measuring from the lowest spot (such as a speaker going through the ceiling of the boot) and the narrowest spot (such as the wheel well that intrudes into the boot).
I’m sorry I may be slow but if we have a tank and a electric power washer like yours. We don’t need a generator or a machine powering the water ?
Love your setup! May I ask what material you used to mount all those reels and bottles? Is that wood?
3/4 plywood.
@@revibeautodetail salamat po
@@bakad7424 salamat!
Genuine question, who'd you go through for the shirt? I prefer a collard shirt and that one looks like it BREATHES.
What kind of pressure relief valve do you use on your tanks
1/2 pvc plugs
Who made the shirts? They look so sick!
Who made the shirts!!?
Where do you find this water tank in Canada??? Doesn’t anybody know
I have a quick question. I ordered the same tank. Instead of mounting it like the way you have it. Can i mount it on its side instead or would that be issues for the tank?
6 months with my tank sideways in my vehicle, no issues
How would you do a set up for winter
I did the exact thing with the air hose reel from harbor freight, hasn't given me any problems yet
Same here! 👌🏻
@@revibeautodetail how much you sell them if you can make one for me
Dm me on instagram.
@@revibeautodetail what you ig
For the last fitting is it 1/4 to 3/4 fitting because i can’t find it anywhere? Thank you
Que tipo de generador eléctrico utilizas?
Sup man you do an amazing job where you located ? I’m interested on a set up
Hey there man, im located in Bay Area. Hit me up on instagram @revibeautodetail.
Where can you get a flexzilla hose that connect the pressure washer reel to the pressure washer?!!
Using an air hose reel for a pressure washer. Are you not worried about rust???
👍🏾👍🏾
Just was wondering do you have business insurance as you started your business.
What size pvc reducer bushing?
What exactly is the reducer specs? I tried looking at my home depot here in Canada, and coming up blank. I have the water tank all set, just the reducer
Hey! I’m not seeing the links to the plumbing fittings
What about the other hole on the top right of the tank we just leave it open ?
trying to figure out the same thing @revibeautodetail