Це відео не доступне.
Перепрошуємо.
What's In My Paracord Toolkit? | OVERVIEW
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 18 сер 2024
КОМЕНТАРІ • 109
Наступне
Автоматичне відтворення
DIY Paracord JigDIY Master
Переглядів 52 тис.
Nylon Vs. Polyester Paracord | KNOW THE DIFFERENCE!The Weavers of Eternity Paracord
Переглядів 76 тис.
Stop Wasting Your 550 Paracord and Start Using BanklineSTOKERMATIC
Переглядів 118 тис.
⚡️ "Пятки сверкали" аж до КУРСКА! "Кадыровцы" БЕЖАЛИ, оголив фронт!FREEДOM. LIVE
Переглядів 1,1 млн
Replacing a valve on a full water tank! 🫣💦 - 🎥 the_ladyplumberUNILAD
Переглядів 140 млн
Путин о боях в Курской области: Главное - выдавить противникаAKIpress news
Переглядів 1,5 млн
Державний Прапор України підняли на КУРЩИНІ в рф😍🇺🇦💪🏻 #курськ #прапорукраїни #рф #війна #наступТелеканал Конкурент TV - новини Луцька та Волині
Переглядів 432 тис.
Marlinspike VS Fid | DragonSpikes REVIEW | Paracord Knot ToolsThe Weavers of Eternity Paracord
Переглядів 25 тис.
This KNOT Is NOT ILLEGAL! (FOLLOW UP)The Weavers of Eternity Paracord
Переглядів 31 тис.
The 5 Kinds of Paracord Tools You NeedParacord Planet
Переглядів 60 тис.
Essential paracord tools- my basic kitParacord guild
Переглядів 19 тис.
Understanding and Using Paracord Bracelet JigsParacord Planet
Переглядів 47 тис.
HOW TO MAKE PLUCKY FALLS KNOT PARACORD BRACELET, EASY PARACORD TUTORIAL, DIY.THREE BRCLT
Переглядів 122 тис.
Knit paracord lanyardParacord guild
Переглядів 74 тис.
This AWESOME TUTORIAL will show you how to make VIPER Paracord BraceletPulseras Paracord
Переглядів 25 тис.
101 Uses of Paracord - Survival, Homesteading and ZombiesOmegaGear
Переглядів 972 тис.
Running With Bigger And Bigger FeastablesMrBeast
Переглядів 95 млн
🔥 Уся правда про українську СУДЖУЗе Інтерв'юер
Переглядів 335 тис.
Бутылка Air Up обмани мозг вкусомКостя Павлов
Переглядів 2 млн
ЛЕТНИЙ ДЕНЬ ТВОЕГО ДЕТСТВАSIDELNIKOVVV
Переглядів 1,6 млн
아이스크림으로 진짜 친구 구별하는법진영민yeongmin
Переглядів 10 млн
Обман ради папы #юмор #топКостя Павлов
Переглядів 4 млн
KLAVDIA PETRIVNA, МАША КОНДРАТЕНКО - ЇДЕ ДАХ (OFFICIAL VIDEO)Klavdia Petrivna
Переглядів 896 тис.
Битва умов. ❤️ПІДПИШИСЬ! Андрій Попик. чат рулетка.Андрій Попик чат рулетка
Переглядів 470 тис.
THANK YOU FOR WATCHING!
Don’t forget to SUBSCRIBE ▶ goo.gl/64NjJm
WOE recommended paracord supplies and products ▶ goo.gl/ZgnDpa (affiliate)
Support on Patreon for exclusive videos and Discord ▶ goo.gl/TV8jos
Follow on Instagram ▶ instagram.com/weaversofeternity/
Follow on Pinterest ▶ www.pinterest.ca/weaverseternity/
Like on Facebook ▶ goo.gl/qRmxAD
Merchandise Now Available
▶ teespring.com/stores/weaversofeternity
I would like to know. What would the COST be for such a pouch, sir?
I would like to know. What would the COST be for such a pouch, sir?
youtube.com/@dspikes316?si=Gz3qGlpAoNYeddl2 I'm now on UA-cam as well Tim
I love the honesty about the scissors. We all have things in our various kits that we know are a little bit overkill, tacticool or maybe “boutique”. Reminds me of my main lock picking kit.
My kit has evolved at least three times over due to how I have aged. My prototype setup consisted of:
* Grocery store bamboo chopsticks ( both as fids and as home made knitting/ crochet hooks when notched using micro files).
* bic lighter
* Pocket knife ( swiss variety)
* key rings ( for portable attachment points used while weaving or braiding).
V1.0:
* pocket knife ( single blade)
* 1 set of bamboo chopsticks ( one as a hook, one as a fid)
* bic lighter
* 1 net shuttle/ weaving sword daisho ( 11 inch and 5 inch long)
V2.0 ( current optimized load):
* 2 nylon construction belt pouches ( black)
* 2 Marlins spikes ( 1 aluminum w/ lacing needles, 1 stainless steel. Both models are shown in video from jigproshop, just in black and silver)
* 13 tapestry needles and 1 leather working needle ( housed in silver marline spike. Tapastry needles bought at local Kroger market place, leather lacing needle bought at Tandy's leather supply.)
* 2 key rings ( attached to marline spikes)
* 2 different size aluminum crochet hooks ( bought at walmart)
* 1 pocket knife ( single blade)
* 1 electronic lighter ( aka: my pocket sized plasma cutter)
* 1 stainless steel solid welded O ring ( for lashing point and counterweight while braiding, bought at walmart)
* 1 8 inch wooden hand carved net weaving shuttle ( doubles as weaving sword)
* 1 set of hand carved 6 inch mini drop spindles ( for making small gauge string into cordage and to act as bobbins).
Granted, some of this isnt used for paracord, but the vast majority of all equipment listed that I use basically is for any type of handmade rope making, macrame, or knotwork needs. All of my current load out fits snugly in two belt pouches and is quite lightweight, so I can basically carry it anywhere I need to with no issue. Hope this helps out people who are looking to get into the craft.
Terrific. Thanks for writing that up.
Onde posso comprar
Onde posso comprar esse jogo
@@valdomirpinto8041, 90% of the stuff I picked up can be bought or found in hardware, grocery stores and general stores. The other 5% is hand fabricated and the last stuff like the marline spikes is found online at jigproshop, and Tandy's leather working website. Hope that helps.
I took your advice about getting the pouch, and it’s been very helpful- thanks.
I have pretty much the tools that you have, but I have a few extras as well.
I keep 2-3 snack-size ziploc bags for Paracord scraps, rubber bands, and anything else I may need to keep in the left pocket.
I keep a pack of “ouchless” hair bands that I use to make stretchy bracelets in the right pocket, as well as a small bag of extra fids, tweezers, and a metal tool.
I also keep a short piece of cord just for knotting practice, as I have been doing Paracord for
Sounds like you've got a solid kit going there! Glad it was helpful and I hope you keep going! Thanks for sharing this with me 🙏
@@TheWeaversofEternity 👍
Thanks for the video, this helped me get organized. I went with Maxpedition Fatty Pocket Organizer as it seemed to be a bit more rugged.
Initially when I got a hank of paracord from REI (to pad out the order), I was thinking of using it for emergency rigging and similar tasks. But watching you and other UA-camrs make amazing stuff out of this has inspired me to try some of these projects out for myself.
I find a pair of lightweight grippy work gloves useful as well. Nice kit
A few months ago I bought a parakeet kit with I included a marlin spike, a pouch, some lacing needles and a few metal (clay) sculpting tools and flat lacing needles. The last two I initially thought I wouldn't use them a lot. But I have used them quite a lot. Especially the flat needles. They are sometimes easier to fit through the small paracord holes
A very tidy kit Tim, I think I need something like this, which would force me to go back to basics. My full kit takes up two washing machine tabs boxes that weigh close to 12 lbs and I have to tip them out to find anything. Great post ! ✌❤ Bob.
I'm totally tuned for full review very soon I'm totally tuned for full review very soon.
ROFL.... I wondered if someone would "mention" that little editing slip up of the double statement.... 😆
Yeah Tim as I dont have a knotters tool I use a simple sewing thimble. The knurled head does a great job of finishing my burning and singeing operations. My reason for buying was cost alone, the thimble was equivalent to $1.00 US, whereas the knotters tool was $20.00 US . My go to scissors are electricians scissors $6.00 US ✌❤ Bob.
I like my siscor-type cat claw cutters for cutting cord. They are small, inexpensive, and prevent fraying of cord.
I love your setup for this! Very organized and it’s a brilliant usage for that type of edc pouch.
You are the reason I use medical shears like the ones you use. Was looking for something that makes a clean cut, and they fit the bill perfectly. Was using braid fishing line ones before, but they have very small finger holes and a inconsistent cut.
Thank you for putting these videos out. I would have not thought to use them otherwise.
Yes the matching OD pouch and matching scissors does look cool.
This kit would have been nice to have when I was still in the Navy back in the 80s. I would add a couple of knives and sharpening stones along with waxed thread for whipping the ends of line and rope. Edit: almost forgot the sail needles and thimbles.
The only two things I use that aren’t in your pack are a couple of traditional marlinspike pocket folder knives, one for at home, the other stays on my belt for EDC. I’ve had two of the aluminum marlinspike “knotters tools” for a few years and didn’t know until now that they now make this stainless steel “II” version, one of which is now on its way. Just the marlinspike, into which I’ll put the lacing needles from my EDC aluminum and carry the SS one instead. Thanks, man!
i personally use:
- an arc lighter (to cut and seal some paracord)
- paracord needles
- center punch (as a marlin spike)
- knipex mini pliers
- klein electrician shears (small and compact one)
besides the paracord needles everything else has a use outside of wrapping paracord
Cool beans, Tim! I'm gonna need that tactical pouch for sure. My kit is typically (2) hemostats, (1) Marlinspike, (2) each of (3) sizes of lacing needles, (1) scissors & (1) butane torch & (1) flexible tape. I think I'm going to look into the Iroda torch for more precision. Cheers!
Glad you liked the video! You kit sounds solid to me so far. But yeah a nice pouch to keep everything together has really made my life easier instead of having to look for things all the time. Thanks for stopping by and commenting as always!
Love the hemistats. Have three different ones that come in handy for all kinds of projects.
I keep my grill lighter, scissors, and needle-nose pliers in a plain zipper pouch bag. I need to get a marlinspike, fid, and lacing needles one of these days.
The only thing really "special" in my kit are the type of shears I use. I grabbed a pair of foot trimmer shears from the veterinary section of Tractor Supply and I chose them for a couple reasons. First that they're not like scissors so there's no finger and thumb holes to fight with when I only have the one hand available. The handles are are also spring assisted so they quickly pop back open after making a cut. Finally, the blades. They're meant to cut through sheep hooves so the blades are very hard to hold an edge well and they're very sharp. All in all, these shears might be overkill for cutting paracord but all the little things combine to make them a dream for the task.
Same shears, but mine are black.... LOVE them... super sharp and cut Paracord cleanly. I hated it when I'd cut Paracord and the ends would not cut cleanly. Those bandage shears solved that problem! They are what EMT's, Paramedics and ER staff use to cut off clothing or bandages. They have to be super sharp to be able to do that out In The field. I have a similar bag, but mine is a bit bigger. I wanted something large enough to hold my can of butane fuel as well as my large butane lighter. I have since downgraded my lighter to one that fits in the palm of my hand better and it also extinguishes the flame as soon as I let go of the trigger. Finally got some hemostats to replace the needle nosed pliers I was using. The only thing I do not have is one of those brass fids that you've got. As much was I would like to have a set of those, they are probably a bit on the expensive side....
There are 2 tools I find essential for paracord work and both will fit fine in your handy case. The first is a set of silicone finger cots. The link below will show a set for about $5 on Amazon. $ sets of 3 different sizes which fit all your fingers. I use only 2 - one on my Index finger and one on my thumb. Their melting temp is 600 DegF which is higher than 550 Nylon that melts at 450 Deg. These allow you to melt cut ends of paracord while at the same time forming the tip conically so they will thread quickly and solidly into a lacing needle / FID. These finger protectors also allow you to create a flat tip or smooth tip of a melted piece of paracord. Finally these cots allow you to do a beautiful job at joining / melting together two different pieces of paracord by using the same two fingers to blend the ends and rotate the fingers to finish and smooth the joint so it is the same diameter as a single piece of paracord and the joint is almost invisible. While you get a lot of these silicone finger cotas / caps / protectors for $5, I am still using the very first two out of the package and after about 10,000 uses they are still as good as new. MOST IMPORTANTLY, I have never burned my fingers or any other body part. Will describe my next tool in a separate comment to follow.
www.amazon.com/Silicone-Protection-Protectors-Resistant-Sleeves/dp/B07QGT6WNF/ref=sr_1_16?dchild=1&keywords=silicone+finger+cots&qid=1616692876&sr=8-16
Well, OK, I have another tool to recommend, But it won't fit into your tool case, Tim, but might be useful to consider.
IRODA Torch Model 220 (Not 200 and not 230). Meant to use of your work surface so you can use both hands to melt / heat your paracord. Has a air valve in addition to butane fuel valve so it can run at a very low temperature for controlled slow melt / heat that allows you to get into tight spaces and perform paracord "microsurgery". Has just the right type of safety features.
Cheers, Murray
My kit is pretty basic: currently a Knotter's Tool (with lacing needles), a smoothing tool, and a few disposable lighters, all kept in a Plano stowaway tackle box. I need to get a 25-foot tape measure instead of a 100-foot one. My cutting tools are 58mm Victorinox Swiss Army knives, which are on a neck lanyard when I'm working with paracord.
Pouch = Vanquest Gear Every Day Carry Maximizer Slim - not the best layout of loops & such for this kind of gear but I had it laying around not being used.
Same aluminum knotter's tool with the 3 fids inside.
My hemostats are from the fishing dept at my local WalMart, so they aren't as small as yours, but the finger holes are a little bigger.
Similar tape measure.
Sucky cheap scissors- I'll likely be upgrading to a pair similar to yours soon.
Smoothing tool from Bored Paracord.
2 torch-style lighters - 1 I use if I only need it for a quick melt b/c the metal under the plunger gets hot fast, one that stays cooler longer but the flame control mechanism sucks so I have to watch burning myself if I have to turn it at all.
Threader tool from craft store that I tried before I got the knotter's tool & fids.
Couple of extra fids (1 550 size & 1 microcord size).
Split ring pliers/tool - no so much specifically for paracord projects but it fits in the pouch quite well.
And for some strange reason, a spring-loaded key-biner - I think this is left from when I used the pouch before as a backpack organizer pouch.
Things I'm planning to add: tucking tool, bent nose pliers, better scissors, better torch if I find one I like that doesn't burn me, silicone finger cots from Murray's suggestion & maybe his wire cutter suggestion.
I have both the aluminum and stainless steel version of that first marlinspike. They're both nice, but I definitely like the stainless one better.
Why? Weight, I guess?
@@SamGGreenberg It's weightier, better feel to the finish(anodizing vs polished stainless), the spike is more pointy so you can get into the weave better.
The aluminum ones are very soft compared to steel and the pointed tips bend very easily, almost like copper wire. My aluminum one was bent after just a few mins of use and it’s very difficult to properly straighten it snd keep it straight. The weight of steel won’t be a problem for most people. The cost may be higher.
The only extra thing I have is electrical tape. I sometimes use it on the end of cord when I leave a tail on and want a shoe lace effect. rarely used but I have it in my pouch (maxpedition fatty)
Just starting out. So far I’ve made 8 camera straps and five bracelets. Have only used scissors, lighter, and some twizzers. I would like to pick up a knotters tool. Seems useful. Thanks for the vids!
That's great to hear! You definitely don't NEED a ton of tools for this hobby, but there are some that definitely make things easier. You're welcome and keep going!
I got the same marlin spike yesterday in a different color (black), it's pretty good.
Found the tool list, thanks
Very nice kit 💕 I only use scissors, lighter, and forceps!
I am surprised how many of the things I have that are the same.
Same!
Please help, need a list to buy all these cool tools and case. Thanks
I need that
I think it's a cool lil kit.
Your have amazing videos and I have learned so much from you.. Thank you so much
I’m getting back into this after years ago. Just curious, I’ve seen you use a wooden jig in a couple videos. Where did you get it or did you make it?
I got that one from Mr. Coop. If you just google Mr Coop's Crafty Corner, you'll find his site. The only way I modified mine was staining it.
2:24 he made and sent these to me to check out so I will be doing a full review of these very soon.
Echo? I am enjoying learning how to knot with paracord.
Do you have a video of how you made those zipper pulls?
Nice good job
Hi Tim, what knotters tool would you prefer - red or made of stainless steel?
I prefer stainless as it's stronger and less likely to bend at the very tip of the spike.
@@TheWeaversofEternity Thanks for your answer! Were there any situations where your red knotters tool was bent?
Great Tim!!
We're can i buy the tools kit
The end of a fish stringer its great if you don't have paracord needles
very nice and useful tool kit! where did you get those scissors ✂️?
Thanks Roxanne, I've got a link for those in the description box.
How can I get it And how much is it?
Nice man awesome vid
Dónde y cómo puedo adquirir uno?
The shears in the video have the carabiner built into the thumb grip, but the link points to a different pair. Are the ones you have in the video no longer available?
Yeah unfortunately I couldn't find a link to them for Amazon US as I bought them on Amazon CA. You could always try finding them through Amazon CA and see if they will ship to the States.
@@TheWeaversofEternity Got it. Thanks.
It so neat
Very, Very nice ✌
How do i get the ket and how much do you want for it
There are links for where to get all of these tools and kit in the description box.
2:15 said it twice? 🤔
Where would I get the storage kit¿
The storage pouch link is amzn.to/2PoRRZx . There is no complete kit. The tools need to be purchased individually. There are some links at the top of this page.
Cheers, Murray
At 2:14 you repeated yourself twice lol
🤷♂️
That is so cool
what is the total price, sorry this would be a big help for those starting out
Links in the description, work it out for us. Include shipping.
Thanks!
@@stevenkelby2169 YW :)
@@cornbreadfedkirkpatrick9647 😂 🍻
Muy bueno
Love these videos
Набор супер!!!
So you don't sell these kits for us starting out?? OK, who does?? Anyone know??
No, I do not sell these. I put this kit together from various sources. I have links for all products mentioned in the description box.
2:13
You said it twice)
i love paracord planet. but their marlin spike (the one you show here) is horrible IMO. it was always coming unscrewed so i just went on amazon and got a solid brass one.
I have that issue as well with it coming unscrewed. What you can do is get some teflon tape, the kind used for plumbing, and wrap it around the threads of the spike where it unscrews and that should help it stay screwed together.
@@TheWeaversofEternity thats a great idea. i already threw it away though lol
Which is the one from PARACORD planet? The silver one? Red one? I want to get started with PARACORDing but maybe I can't find things here in Japan. They have Marlin spikes on Amazon but made in China😡🤬 ...I wish the quality. Any recommendations for first timer?
All your paracord pain in one video pls
I just discovered a glitch in the matrix 2:13
GG
Excelente
😍❤👍
Uh… I must be in the matrix! At 02:14 he sayshe’ll be checking these out and will make a full review. Then five seconds later at 02:19 he says the exact same thing!! If we remember what happened to Keanu Reeves when he mentioned seeing the black cat go by the door two times, he was told that one of the agents had just entered “the Matrix” sending a ripple in the computerized imagery. Wha?
You need to review your footage bro before you release it to the UA-cam universe. Or maybe use one of them fancy tools to undo the knot in your video tape and snip it out with your cutters then everything will be right again/// 😏🔧
جميل جدا
Can you send me one free
Yeah Tim as I dont have a knotters tool I use a simple sewing thimble. The knurled head does a great job of finishing my burning and singeing operations. My reason for buying was cost alone, the thimble was equivalent to $1.00 US, whereas the knotters tool was $20.00 US . My go to scissors are electricians scissors $6.00 US ✌❤ Bob.