Because essentially it's a modern BMW Unit. Designed cheaply and without any form of tolerance for timing chain slack and with weak components. The engine is basically the pretty strong and reliable PSA TU10 block and piston's mated to a BMW engineered cylinder head and valve train. When working correctly it's a great unit ..but more often or not they don't. Vanos issues, chain tensioners etc etc. It's easy for BMW fanboys to apportion the blame on PSA but when in actual fact it's all the BMW developed componentry that go south in these units - which is very evident when you strip one down.
I can totally agree I had a 1.4 Citroen c3 with the 90hp engine and the cylinder head failed after 3 years and 27000 miles I had the rattling as well on mine and was told by Citroen both issues were common After replacement I had no issues It was such a disappointing engine after my first c3 which had the older PSA 75hp engine
It’s sad to think that BMW used to build some of the best engines ever put into production cars. Most of the stuff they’ve designed in the past 20 years is absolute junk. Failing at low mileages with high mileage issues (big end bearings, timing chains etc)
Owned my Citroen DS3 from brand new since 2016. 121kw Euro 6 THP 1.6 engine which has just done 77,000 km. Currently I have it going through a stage 4 performance upgrade. The DS3 is the best car I’ve ever owned. You need to clean the valves every 30,000 km as it’s direct injection. Keep it serviced, and it shouldn’t have a problem. Timing chain issues were eradicated with the release of the euro 6 engine as psa lengthened the tensioner. If you use a non factory tensioner it won’t have this revision - so don’t cheap out on parts and always fit genuine. The rattle at the start is how the engine is until it’s warm. Sometimes it does it, sometimes it does not. After 7 years I haven’t had a break down, it doesn’t eat oil, and it consistently pulls hard to redline. Soon it will have 300 hp. Can’t wait!
@@ChopsGarage like I said, the noise has come and gone only on start up ever since I’ve owned it. Once the engine is warm it never does it. I’ve only had a good experience with Citroen and DS, then again I do service and look after the car meticulously. I also went down the rabbit hole of trying to figure out this noise thinking it was the chain, but If the chain and guides are flogged out the noise is completely different and not good. Will watch and listen to the video tonight. Cheers 👍
I had one of these a 2010, and had it for almost 5 years. I used to get a rattle at start up, especially after sitting, until oil pressure built up. Turned out it was the cam chain tensioner. A few times it unscrewed itself and then leaked oil all over the back of the engine. Replacing the tensioner helped, but id never buy one again.
I have a c4 Picasso with 1.6 thp engine and the car is shaking when it is at idle position. Dealer cleaned the valves replaced oil with 10w60 but this shaking problem is still there and annoying.I think your solution might solve my problem Thanks!
They are absolute junk. It's the BMW/PSA joint project, the 'Prince' engine of doom. The standard ones are bad enough; oval bores, ring wear, timing chain stretch, guides breaking, oil leaks etc etc etc. The turbo ones are much worse; high pressure fuel pump, inlet ports coking up and so on. If the brake vacuum pump seizes, it stops the camshaft dead and the timing chain rips the vanos gear clean off. It's very similar to the MINI unit. Hateful rubbish.
Trading up to a Morgan sounds like a fun series. Probably need to flip them quick to maintain interest and what happens if one of the buys is a "Look whats back in again."
I own a DS 3 1.6THP and mine used to idle rough for a while and then it just stopped doing it and it only occasionally does it. It's more than likely just the engine being sat for a while. Some engines idle a lot louder and rougher than the THP when it's cold. My advice would be to just drive the car and enjoy it, it's nothing to worry about mate 👍
Hello! I had the same DS3, a year or two older, and I had big engine issues. Very similar to the issues you had. Car was brand new and under warranty. Spent around 6 months in and out of dealer. Eventually they replaced the engine…
We had a 2011 1.6thp ds3. It was a bit of a nightmare, coked up valves, coil pack issues and rough erratic idle. After 6 long months Citroën finally solved the issue by putting a new high pressure fuel pump on it. Was perfect after that, never missed beat but we sold it as i couldn't stomach owning one out of warranty.
Could the issue be the battery? My wife's 5 year old Toyota was running a bit rough on occasions when starting up, usually when weather was cold. Stuck a new battery in and it's been fine since..
Most of the issues were fixed with the EP6FDT, the older EP6CDT engines had the issues which that DS3 has (150/155CV engines), the FDT came out with the facelift and switch to E6, , but It's best to give it the full timing chain replacement with the updated parts also checking the valves as they notorious for heavy coking from the PCV. PSA/Stelantis are still using the FDT version and there's not been many complaints about it.
Gotta agree, got a ds3 facelift with the fdt, 55k miles never had an issue, never had an engine light, no timing chain noise, very fun to drive and efficient, with the right maintenance this is actually an amazing engine
If oil not changed every 5000 ish miles or gets slightly low the timing chain tensioner on these can cause issues ..also these engines dont like ethanol ...
The DS3 -Trade it out. You've got the idea in your head that there's something wrong with it, you're never going to be confident retailing it, no matter how much tinkering you do or get Moore's do to it, so trade it, get rid of it & move on.
Hello, Ive got a fair bit of experince with these engines both mini and citroen and they can be an utter nightmare. My advise would be to check the oil pressure from cold as well as hot. If its not right then just get rid otherwise it could turn into a massive can of worms. Low oil pressure will cause uneven idle as well as chain rattle and not always have any fault codes. Common oil pressure fault codes are vanos or mixture related. Hope this helps.
They're good when they work. Their issues are well understood now, so with the right fixes and maintenance they're not that bad, but still, I wouldn't own one personally. These are also in second gen Minis which is where I know them from.
@@MrManBuzz Yeah I don't think I'd have another one. The worst thing about PSA cars in my opinion is the stupid economy mode crap - I don't want my car dictating what I do, it's my slave not the other way round.
Always felt Mike Brewer’s Trading Up was a little too stage managed, with the cars he buys and sells being carefully researched to allow an easy fix and turnaround. So I’d be really interested in seeing someone do it for real. Best of luck, love the vids you do, I’m not in the trade so always a fascinating to see how it works.
I think the only way he's able to do it is getting free parts and probably free cars and just bases them on their value when really he puts no money in
If you have enough margin to just trade it off non retail would be best in my opinion. Nullify your liability especially when your in two minds yourself.
Where to start with the THP engine... The rough idle at startup could be caused by a slightly leaky hydraulic valve lifter. If that particular valve is open when the engine is stopped, the oil will leak out of the lifter over several hours, and when the engine is restarted, that cylinder will have no compression until the oil pressure is up and the valve lifter has refilled itself, which takes several seconds. If you sit one of these engines for a few weeks (even a good one) they have a rough idle for a while at the next start. This could have been caused by a previous delayed oil change and dirty oil, but probably not worth fixing. If the fault code is for over-boost or super-knock, then the problem is likely the atmospheric filter for the boost control valve. This is located on a plastic tube that sticks up just rear of the engine top cover at the gearbox end. The filter has a rubber cap that shrinks over time and restricts the airflow, so the turbo control valve can't dump vacuum fast enough, causing the over-boost fault. Just remove the rubber cap from the little filter (leaving the filter in place) and that code should not come back. It is not unusual to be able to hear the dump valve operating if you have the window open. Just check that the air pipe into the turbo is tight and that the 2 breather pipes that feed into that are also in-place.
James that's sounds like a very interesting plan Trading up to a Morgan would love to see that on your channel in my opinion your channel is one of the most interesting automotive channels on UA-cam. Keep the good work up I look forward to watching your next episode.
I have a BMW 320 (2200cc) 6 cylinder m coupe from 2005. Had it 6 years now has 95k on clock and its fine . Sounds amazing . But it may be going due to having a replacement. I also have a 2010 2.0 dci Qashqai which we have had from new , it's done 175 k and still runs great , it's replacement is still largely unused since November. A Kia sportage diesel mild hybrid which is great too
I'm considering of buying a 2016 with 96K kilometers on it. No idea if engine was replaced or not, but considering the car been drive for some quite time and probably passed all the "warrenty problems" that would have popped up through the years... Would you guys recommend it? I'm currently driving a 2017 Clio with 0.9 engine which is extremely reliable as it seems but even after stage 1 it makes merely 130HP and I want something more powerful and more fun.
Like the idea of 'Projects' like the VW Up as it will provide the channel with more variety of content, especially if you do the cash-trading to get a Morgan. The only thing is being realistic about the actual profits of the trades, as other channels have done this and bury reality of costs, overheads and labour with a lot of hype to produce somewhat fake results just to make themselves look good ... Anyway, good to see that business seems to be on a positive trend.
I will try again since my last post was lambasted by trolls. Citreon don't have the best of reputations when it comes to faults that are hard to find. They remind me of Alfa Romeo's unless you are very lucky and buy a good one you will never buy another. And i am speaking from personal experience of both makes.
I have the same engine with almost 160.000 kms, no problems, no noise, no oil consumption, and it tracks a big boat (C4 Grand Picasso), the thing it needs is to : - replace the timing chain+ tensioner every 80.000-100.000 kms - have the oil + filters replaced every 10.000-12.000 kms - use clean petrol type (SP98 preferred - SP95 tolerated) - clean engine from carbon build once per 30.000 kms maybe make the engine live better (preventive actions) : - replace the turbo wastegate (cheap piece) one per a while (I would say 100.000 kms) - replace the PCV valve one per a while (easy to replace) - STOP the start-stop function as it can damage the Turbo. I hope it helps, this engine is very nice if we take decent care of it and
Its a quick little car mate, my sons g/f got one but the problems started 1 week after buying it when the oil light came on, last mot listed an oil leak but not dripping on the floor .weve cured the cracked plastic cam cover ( that was the annoying oil misting leak) its had a st/steel scorpion cat back exhaust fitted. Chomps oil at a horrendous rate , approx 1 ltr per 450-500 miles, no’1 plug tip ceramic missing ( iridium plugs too) replaced 1 plug only as only 55k and all plugs plugs show oil fouling cos of blow by. Now gets knock codes ( inlet valves coking up) next visit here is check Pcv, change oil filter ( cos theyve hidden it away for an easy user change) and assess the blow by into the turbo inlet…. Need to see it cold start and follow it to assess blue smoke…. It’s defo burning oil cos there was loadsa carbon crud on the tailpipe before it was changed. I’ll see that showing again likely as it was a few weeks ago.Terraclean guy reckons his gear wont fix the cruddy inlets. Need to isolate if its rings/bore or stem seals worn out next…. Nice enough cheap car but engine is a pile of cack.
I loved my 208 GTi with the same engine... I serviced it regularly and maintained it well... 173K on its original engine and turbo... its a good engine if its maintained properly but most people don't look after cars as they should
Totally agree with this. Thought I feel manufacturers and dealers are to blame. 20k service intervals to me seems crazy. Personally I do 8k intervals full which some may see as a tad overkill however has proven my car over the past 3 years has done 70k without any issues.
@@hal752 8k is definitely not overkill. I service every 5k on my Clio RS, and every 3 for my Mazda 1.6d as the oil feed pipes very easily clog up and kill the turbo. Think Mazda advise a 12k oil change, which is way off imo for these engines.
Not everyone has your ability unfortunately. A car should be designed with mechanically uneducated people in mind. Hence french cars are beyond a joke.
Had a friend who worked on Citroen cars and even supported the Citroen rally works team . he loved a true citroen and said they were brilliant but any joint ventures or as he called it " built for the value market" . His advice was get one new with a warranty and sell before 3 years , pass the trouble on .
Flying Wheels on UA-cam has done a similar series with £2,500 trading up, it’s a great watch and they get 100k+ views on some of the videos so they definitely have a demand
I have the non turbo DS3 1.6, from 2016 it has an excessively nosy top end chatter from cold, but it has done it for years. I have put over 30k miles on it with no issues at all apart from a couple of oil leaks one on the timing chain cover side and one on the gearbox side...a little annoying but it's French and from my experience they leak almost as bad as BMW's.
Have to say I've had mine for 18 months, 2015 1.2 puretech w/86k on the clock when I had it, FSH 5yrs dealer and 2 independent. I'm the 2nd owner from new and the 1st was a young woman , these cars are reliable BUT they are best as long as you change the oil twice a year, these engines are prone to carbon build up and hence oil burning and increased oil consumption, an oil change isn't expensive and if you do it yourself it's cheaper again
I have a DS3 1.4 Vti and get weird noises from it when I start it, thinking it might be the timing chain, could be there one second but not the next, seem to have a coolant leak as well as an oil leak and if got anywhere about 60 mph sound like it might explode from the sound.
Hi James trading up adventure sounds good, i noticed that on Qashqai the seats have a stripe effect after shampooing, this happened on my wifes Qashqai and no matter how much i re wet vac i can not get rid of the stripes, would be interested to know if you have same issue
You do know thoes engines drop the Cambelt into the oil and they go after around 30,000 miles and they're shite to the gallon an absolute avoid from me get the 1.6 diesel
It’s timing chain on these tbh seen these move on cams as no keyway on any pulley I work on Citroen and Peugeot daily can’t really say what’s wrong without physically seeing it could just need regular using
@@dodgydave4841The entire engine is shite thought if I'm honest. As James was saying it's got no performance and from my experience they the 1.6 turbos manage about 30 to the gallon. If you want decent fuel economy you need a non turbo 75bhp job which is painful
same as my DS3 2014 1.6 convertible sport , It is surely female ? Sometimes it starts fine , drives great , next day it starts like a broken washing machine. its a german BMW engine . we expect more
I think the 1.6 hdi is a better choice in these. The thp engine is from what I understand a wet belt. I think getting 100k out of the thp engine will require prompt servicing and the oil has to be spot on and biggest thing you need to get the thp engine to 100k is a miracle.
these are terrible cars withthe THP engine. I used to own the yellow and black "bee" colour and first thing I notice was the huge plume of white smoke on morning startups. One day it gave me the engine misfire warning. Apparently it needs the valves walnut blasting. I since got rid of it as the THP is the BMW expirimental engine.
I have a question I have a Citroen DS3 and it's making a funny noise but I get no code's or anything thing would you be able to help me if I post the video
Father in law has one of the price engine in a 308, none turbo version. Engine wise it's been fine apart from it occasionally throwing a emissions light.
Ive got the 1.6 diesel ds3, had it 5 years it's a 67 plate. Never had any issues with it at all, well im lying i had a leak in my footwell but got it sorted.
Isn't it the N52 engine in the Z4? A guy around the corner was trapped in his X5 as it went up in flames just this week. Almost a million recalled over a fault with the PCV system that can lead to an engine fire.
just about every car ever built has a following of some kind , find a forum where people like them and sell it on the forum and just be honest about it, I bet someone bites your arm off.
Leave it standing for a few days then start it up then run it about for a week if all good sell it for full money and keep it in the bank for when it fomes back lol if not then i dont know
James,just catching up on your videos now,been waiting ages and hoping that you would do a flipping up series for one dream car to keep,i think it would be great for content and you would have your dream car for a small initial investment
I'm wondering if the noise could be caused by the fuel-air mixture regulator making it run rough or a bad earth connection on the electronic stuff,I hope that you get to the bottom of this issue.
Yeah I'm into you trading up to what you aspire to. You have the skills and ethics to make this work for you, it will be another aspect to look forward to on your channel.
Wonder if the DS previous owner didn't use it much, hence surface rust on the cam and why it was running rough. A good blast usually does them a world of good and possibly why it's improving with use?
To declare that the DS3 engine is poorly designed, just because your car is not well maintained, is a childish act. Stop running around the garage like a child and take your car to a good mechanic to fix it.
Lol! Poor maintained? It has 100% fsh! Prehaps you need to stop typing faster than you research as speaking to any mechanic will confirm these die at low miles even fastidiously maintained lol
Because essentially it's a modern BMW Unit. Designed cheaply and without any form of tolerance for timing chain slack and with weak components. The engine is basically the pretty strong and reliable PSA TU10 block and piston's mated to a BMW engineered cylinder head and valve train. When working correctly it's a great unit ..but more often or not they don't. Vanos issues, chain tensioners etc etc.
It's easy for BMW fanboys to apportion the blame on PSA but when in actual fact it's all the BMW developed componentry that go south in these units - which is very evident when you strip one down.
I can totally agree I had a 1.4 Citroen c3 with the 90hp engine and the cylinder head failed after 3 years and 27000 miles I had the rattling as well on mine and was told by Citroen both issues were common
After replacement I had no issues
It was such a disappointing engine after my first c3 which had the older PSA 75hp engine
Thank the lord, someone who actually knows what they’re talking about! BMW scrap engines.
It’s sad to think that BMW used to build some of the best engines ever put into production cars. Most of the stuff they’ve designed in the past 20 years is absolute junk. Failing at low mileages with high mileage issues (big end bearings, timing chains etc)
BMW is atrocious.
@@limpet7r63 Living on past glories like so many German car manufacturers?
Owned my Citroen DS3 from brand new since 2016. 121kw Euro 6 THP 1.6 engine which has just done 77,000 km. Currently I have it going through a stage 4 performance upgrade. The DS3 is the best car I’ve ever owned. You need to clean the valves every 30,000 km as it’s direct injection. Keep it serviced, and it shouldn’t have a problem. Timing chain issues were eradicated with the release of the euro 6 engine as psa lengthened the tensioner. If you use a non factory tensioner it won’t have this revision - so don’t cheap out on parts and always fit genuine. The rattle at the start is how the engine is until it’s warm. Sometimes it does it, sometimes it does not. After 7 years I haven’t had a break down, it doesn’t eat oil, and it consistently pulls hard to redline. Soon it will have 300 hp. Can’t wait!
You think I should leave it alone then mate? My video tonight shows the noisier start up, be good to get your opinion on it
@@ChopsGarage like I said, the noise has come and gone only on start up ever since I’ve owned it. Once the engine is warm it never does it. I’ve only had a good experience with Citroen and DS, then again I do service and look after the car meticulously. I also went down the rabbit hole of trying to figure out this noise thinking it was the chain, but If the chain and guides are flogged out the noise is completely different and not good. Will watch and listen to the video tonight. Cheers 👍
How do you clean the valves then , 👍
Euro 6 that you have is refined engine, that ones don-t have problems as I know. Older versions are problematic.
I had one of these a 2010, and had it for almost 5 years. I used to get a rattle at start up, especially after sitting, until oil pressure built up. Turned out it was the cam chain tensioner. A few times it unscrewed itself and then leaked oil all over the back of the engine. Replacing the tensioner helped, but id never buy one again.
I was going to say something similar but you covered it 👍
I have a c4 Picasso with 1.6 thp engine and the car is shaking when it is at idle position. Dealer cleaned the valves replaced oil with 10w60 but this shaking problem is still there and annoying.I think your solution might solve my problem Thanks!
@@nburaq let me know how you get on. Good luck.
They are absolute junk. It's the BMW/PSA joint project, the 'Prince' engine of doom. The standard ones are bad enough; oval bores, ring wear, timing chain stretch, guides breaking, oil leaks etc etc etc. The turbo ones are much worse; high pressure fuel pump, inlet ports coking up and so on. If the brake vacuum pump seizes, it stops the camshaft dead and the timing chain rips the vanos gear clean off. It's very similar to the MINI unit. Hateful rubbish.
Apart from that they are ok 😂
I thought you were going to run out of space for one minute.....
Are there any symptoms of the vacuum pump problem? Haven't heard of many such catastrophic failures?
It only effects those made on any day ending in Y. 😉😊
@@danielthorpe4750 No. It's a rare fault but it does happen.
Trading up to a Morgan sounds like a fun series. Probably need to flip them quick to maintain interest and what happens if one of the buys is a "Look whats back in again."
Hi James, why not make the Citroen your “daily” for 2 weeks to give it a chance to prove itself before retailing it? 👍
Sounds like a wheeler dealer style trading up thing I would be intested to see how that works out.always enjoy you're videos keep up the good work.
Wow, trading up that money would be very interesting. Should be a great series of video's!
I own a DS 3 1.6THP and mine used to idle rough for a while and then it just stopped doing it and it only occasionally does it. It's more than likely just the engine being sat for a while. Some engines idle a lot louder and rougher than the THP when it's cold. My advice would be to just drive the car and enjoy it, it's nothing to worry about mate 👍
Hello! I had the same DS3, a year or two older, and I had big engine issues. Very similar to the issues you had. Car was brand new and under warranty. Spent around 6 months in and out of dealer. Eventually they replaced the engine…
We had a 2011 1.6thp ds3. It was a bit of a nightmare, coked up valves, coil pack issues and rough erratic idle. After 6 long months Citroën finally solved the issue by putting a new high pressure fuel pump on it. Was perfect after that, never missed beat but we sold it as i couldn't stomach owning one out of warranty.
Oh interesting
More than likely it's the start of the fuel pump showing signs of wear, can give intermittent idle issues such as this
Could the issue be the battery? My wife's 5 year old Toyota was running a bit rough on occasions when starting up, usually when weather was cold. Stuck a new battery in and it's been fine since..
I read it as "my 5 year old wife's toyota"
Thanks for the shout out again buddy , I really do love to pop in and annoy you 😀😀😀😀 don’t forget to subscribe guys lol 😂
Most of the issues were fixed with the EP6FDT, the older EP6CDT engines had the issues which that DS3 has (150/155CV engines), the FDT came out with the facelift and switch to E6, , but It's best to give it the full timing chain replacement with the updated parts also checking the valves as they notorious for heavy coking from the PCV. PSA/Stelantis are still using the FDT version and there's not been many complaints about it.
Yes there are, just wait for it.
Gotta agree, got a ds3 facelift with the fdt, 55k miles never had an issue, never had an engine light, no timing chain noise, very fun to drive and efficient, with the right maintenance this is actually an amazing engine
If oil not changed every 5000 ish miles or gets slightly low the timing chain tensioner on these can cause issues ..also these engines dont like ethanol ...
Do you mean they don't like E10? They are supposed to be ok with it?
The DS3 -Trade it out. You've got the idea in your head that there's something wrong with it, you're never going to be confident retailing it, no matter how much tinkering you do or get Moore's do to it, so trade it, get rid of it & move on.
Completely agree👍, it’s a headache waiting to happen 😞
It could be something like timing chain tensioner given that’s it’s intermittent.
Hello, Ive got a fair bit of experince with these engines both mini and citroen and they can be an utter nightmare. My advise would be to check the oil pressure from cold as well as hot. If its not right then just get rid otherwise it could turn into a massive can of worms. Low oil pressure will cause uneven idle as well as chain rattle and not always have any fault codes. Common oil pressure fault codes are vanos or mixture related. Hope this helps.
Hell yes, I’d love to see the ‘Trade Up’ to Morgan series. Be a good watch.
Bloody hell, not knowing much about their reliability I actually thought they were pretty good little hot hatches. Shows what I know 😂😂
Mine's been great, after I got the chain sorted and got it de-coked. Doesn't use any oil or coolant. It's not fun like the hot-hatches of old but hey.
They're good when they work. Their issues are well understood now, so with the right fixes and maintenance they're not that bad, but still, I wouldn't own one personally. These are also in second gen Minis which is where I know them from.
I think they are, provided you're willing to pay for the breakdowns! 😂
@@MrManBuzz Yeah I don't think I'd have another one. The worst thing about PSA cars in my opinion is the stupid economy mode crap - I don't want my car dictating what I do, it's my slave not the other way round.
Buy a diesel, it’s a proper Peugeot engine which is excellent… These 1.4 and 1.6 petrol are BMW designed and engineered engines
The trading up project seems a great idea, would love to see if you actually make it to a Morgan.
Always felt Mike Brewer’s Trading Up was a little too stage managed, with the cars he buys and sells being carefully researched to allow an easy fix and turnaround. So I’d be really interested in seeing someone do it for real. Best of luck, love the vids you do, I’m not in the trade so always a fascinating to see how it works.
I think the only way he's able to do it is getting free parts and probably free cars and just bases them on their value when really he puts no money in
If you have enough margin to just trade it off non retail would be best in my opinion. Nullify your liability especially when your in two minds yourself.
How bizarre, my mum has a 2013 never had an issue. Sending my love to it
SsshhH! 😀
Where to start with the THP engine...
The rough idle at startup could be caused by a slightly leaky hydraulic valve lifter. If that particular valve is open when the engine is stopped, the oil will leak out of the lifter over several hours, and when the engine is restarted, that cylinder will have no compression until the oil pressure is up and the valve lifter has refilled itself, which takes several seconds. If you sit one of these engines for a few weeks (even a good one) they have a rough idle for a while at the next start. This could have been caused by a previous delayed oil change and dirty oil, but probably not worth fixing.
If the fault code is for over-boost or super-knock, then the problem is likely the atmospheric filter for the boost control valve. This is located on a plastic tube that sticks up just rear of the engine top cover at the gearbox end. The filter has a rubber cap that shrinks over time and restricts the airflow, so the turbo control valve can't dump vacuum fast enough, causing the over-boost fault. Just remove the rubber cap from the little filter (leaving the filter in place) and that code should not come back.
It is not unusual to be able to hear the dump valve operating if you have the window open. Just check that the air pipe into the turbo is tight and that the 2 breather pipes that feed into that are also in-place.
James that's sounds like a very interesting plan Trading up to a Morgan would love to see that on your channel in my opinion your channel is one of the most interesting automotive channels on UA-cam. Keep the good work up I look forward to watching your next episode.
An ex-girlfriend of mine had one, she was a bitch. The cars was ok though!
Best comment yet made my night was needing a smile
James... Half of your videos start off with "Look at what's back..." 😁 Oh the joys of older vehicles.
I got offered one for a pittance and still rejected. More trouble than they're ever worth.
Good idea with the Up James, definitely would be an interesting series 👍🏻
I have a BMW 320 (2200cc) 6 cylinder m coupe from 2005. Had it 6 years now has 95k on clock and its fine . Sounds amazing . But it may be going due to having a replacement. I also have a 2010 2.0 dci Qashqai which we have had from new , it's done 175 k and still runs great , it's replacement is still largely unused since November. A Kia sportage diesel mild hybrid which is great too
I'm considering of buying a 2016 with 96K kilometers on it. No idea if engine was replaced or not, but considering the car been drive for some quite time and probably passed all the "warrenty problems" that would have popped up through the years... Would you guys recommend it? I'm currently driving a 2017 Clio with 0.9 engine which is extremely reliable as it seems but even after stage 1 it makes merely 130HP and I want something more powerful and more fun.
Like the idea of 'Projects' like the VW Up as it will provide the channel with more variety of content, especially if you do the cash-trading to get a Morgan. The only thing is being realistic about the actual profits of the trades, as other channels have done this and bury reality of costs, overheads and labour with a lot of hype to produce somewhat fake results just to make themselves look good ...
Anyway, good to see that business seems to be on a positive trend.
I understand but I've 11 years with my ds3 still going strong
I will try again since my last post was lambasted by trolls.
Citreon don't have the best of reputations when it comes to faults that are hard to find.
They remind me of Alfa Romeo's unless you are very lucky and buy a good one
you will never buy another.
And i am speaking from personal experience of both makes.
I have the same engine with almost 160.000 kms, no problems, no noise, no oil consumption, and it tracks a big boat (C4 Grand Picasso), the thing it needs is to :
- replace the timing chain+ tensioner every 80.000-100.000 kms
- have the oil + filters replaced every 10.000-12.000 kms
- use clean petrol type (SP98 preferred - SP95 tolerated)
- clean engine from carbon build once per 30.000 kms maybe
make the engine live better (preventive actions) :
- replace the turbo wastegate (cheap piece) one per a while (I would say 100.000 kms)
- replace the PCV valve one per a while (easy to replace)
- STOP the start-stop function as it can damage the Turbo.
I hope it helps, this engine is very nice if we take decent care of it and
Its a quick little car mate, my sons g/f got one but the problems started 1 week after buying it when the oil light came on, last mot listed an oil leak but not dripping on the floor .weve cured the cracked plastic cam cover ( that was the annoying oil misting leak) its had a st/steel scorpion cat back exhaust fitted. Chomps oil at a horrendous rate , approx 1 ltr per 450-500 miles, no’1 plug tip ceramic missing ( iridium plugs too) replaced 1 plug only as only 55k and all plugs plugs show oil fouling cos of blow by. Now gets knock codes ( inlet valves coking up) next visit here is check Pcv, change oil filter ( cos theyve hidden it away for an easy user change) and assess the blow by into the turbo inlet…. Need to see it cold start and follow it to assess blue smoke…. It’s defo burning oil cos there was loadsa carbon crud on the tailpipe before it was changed. I’ll see that showing again likely as it was a few weeks ago.Terraclean guy reckons his gear wont fix the cruddy inlets. Need to isolate if its rings/bore or stem seals worn out next…. Nice enough cheap car but engine is a pile of cack.
Great idea to trade up to the Morgan James. Who do you use in Barnstaple to refurbish the alloys?
I loved my 208 GTi with the same engine... I serviced it regularly and maintained it well... 173K on its original engine and turbo... its a good engine if its maintained properly but most people don't look after cars as they should
Totally agree with this. Thought I feel manufacturers and dealers are to blame. 20k service intervals to me seems crazy. Personally I do 8k intervals full which some may see as a tad overkill however has proven my car over the past 3 years has done 70k without any issues.
@@hal752 8k is definitely not overkill. I service every 5k on my Clio RS, and every 3 for my Mazda 1.6d as the oil feed pipes very easily clog up and kill the turbo. Think Mazda advise a 12k oil change, which is way off imo for these engines.
Not everyone has your ability unfortunately. A car should be designed with mechanically uneducated people in mind. Hence french cars are beyond a joke.
@@hal752 Yep, always do this. 20k is stupid.
my 208gti ran beautifully
Had a friend who worked on Citroen cars and even supported the Citroen rally works team . he loved a true citroen and said they were brilliant but any joint ventures or as he called it " built for the value market" . His advice was get one new with a warranty and sell before 3 years , pass the trouble on .
Flying Wheels on UA-cam has done a similar series with £2,500 trading up, it’s a great watch and they get 100k+ views on some of the videos so they definitely have a demand
My cousin had the same car, super cool car but nightmare with electrics etc.
Yeah trade up to the Morgan sounds good and fun. Great updates and hope that DS3 gets sold soon as a great car just let down by its engine!!😀😀
I wouldn't touch any Citroën, Peugeot, BMW or mini with this engine. Its a ticking timebomb irrespective of mileage. Just pot luck.
I have the non turbo DS3 1.6, from 2016 it has an excessively nosy top end chatter from cold, but it has done it for years. I have put over 30k miles on it with no issues at all apart from a couple of oil leaks one on the timing chain cover side and one on the gearbox side...a little annoying but it's French and from my experience they leak almost as bad as BMW's.
Have to say I've had mine for 18 months, 2015 1.2 puretech w/86k on the clock when I had it, FSH 5yrs dealer and 2 independent. I'm the 2nd owner from new and the 1st was a young woman , these cars are reliable BUT they are best as long as you change the oil twice a year, these engines are prone to carbon build up and hence oil burning and increased oil consumption, an oil change isn't expensive and if you do it yourself it's cheaper again
I have a DS3 1.4 Vti and get weird noises from it when I start it, thinking it might be the timing chain, could be there one second but not the next, seem to have a coolant leak as well as an oil leak and if got anywhere about 60 mph sound like it might explode from the sound.
Hi James
trading up adventure sounds good, i noticed that on Qashqai the seats have a stripe effect after shampooing, this happened on my wifes Qashqai and no matter how much i re wet vac i can not get rid of the stripes, would be interested to know if you have same issue
You do know thoes engines drop the Cambelt into the oil and they go after around 30,000 miles and they're shite to the gallon an absolute avoid from me get the 1.6 diesel
It’s timing chain on these tbh seen these move on cams as no keyway on any pulley I work on Citroen and Peugeot daily can’t really say what’s wrong without physically seeing it could just need regular using
@@dodgydave4841The entire engine is shite thought if I'm honest. As James was saying it's got no performance and from my experience they the 1.6 turbos manage about 30 to the gallon. If you want decent fuel economy you need a non turbo 75bhp job which is painful
Sounds interesting your series idea 👍
Very Mike Breweresque
Pls don't use citroen and peugeot, this two models a lot of problems is the fuvking car. Waste time waste money.
Same engine as a mini cooper s and a peugeot 1.6 thp they are absolute Sh-t never touch one with a badge pole
same as my DS3 2014 1.6 convertible sport , It is surely female ? Sometimes it starts fine , drives great , next day it starts like a broken washing machine. its a german BMW engine . we expect more
I read the pre 2014 THP engines can suffer stretched Timing Belts&excessive oil consumption.
Brilliant idea , trade up the cash to £40k , I’ll be hooked
Yes, that would be very interesting. Fascinated to see how long that takes :)
If you are trading up to £40K in cash, don't forget to invest in a decent home alarm system !!!
Oh no won't be in cash
Just a quick question James,,do you use cold water with the pressure washer/snowfoam?
First of all it is bmw designed engine, PSA produced. The main problem came from BMW.
That trading up would be great to watch James, great selection of cars you have at present as well
I think the 1.6 hdi is a better choice in these. The thp engine is from what I understand a wet belt. I think getting 100k out of the thp engine will require prompt servicing and the oil has to be spot on and biggest thing you need to get the thp engine to 100k is a miracle.
these are terrible cars withthe THP engine. I used to own the yellow and black "bee" colour and first thing I notice was the huge plume of white smoke on morning startups. One day it gave me the engine misfire warning. Apparently it needs the valves walnut blasting. I since got rid of it as the THP is the BMW expirimental engine.
My dad's just bought one. I knew the engine had problems.
Trading up with an Up! Like it hope you get your Morgan I look forward to seeing how it goes. Good luck
I have a question I have a Citroen DS3 and it's making a funny noise but I get no code's or anything thing would you be able to help me if I post the video
Father in law has one of the price engine in a 308, none turbo version. Engine wise it's been fine apart from it occasionally throwing a emissions light.
Ive got the 1.6 diesel ds3, had it 5 years it's a 67 plate. Never had any issues with it at all, well im lying i had a leak in my footwell but got it sorted.
Isn't it the N52 engine in the Z4? A guy around the corner was trapped in his X5 as it went up in flames just this week. Almost a million recalled over a fault with the PCV system that can lead to an engine fire.
James, when you say wheel acid, what specific product do you use?
Try a Puretch 1.2.
I'm joking. Don't.
put a bottle of “ dry gas”. aka something to pull water out pf tank. ethanol blend gad is great and getting to much eater especially sitting
just about every car ever built has a following of some kind , find a forum where people like them and sell it on the forum and just be honest about it, I bet someone bites your arm off.
Leave it standing for a few days then start it up then run it about for a week if all good sell it for full money and keep it in the bank for when it fomes back lol if not then i dont know
Think you diluted the snow foam a bit too much mate, needs to be more foamy than that! ☃️
How come I've had 2 DS3 (diesels) - current one over 90,000 miles - no problems and drives like a dream. No road tax either
Because you have had 1. Law of averages , plus diesel not petrol
I think it’s the same engine as in the Mini Cooper S - total junk of an wngine
VW UP looks like a nice profitable turnaround James, I wouldn't worry anymore about the Citroën DS3 get it cleaned and up for sale.
These engines are very similar to the R56 Mini’s engine. They were piles of shit.
Such a beautiful car with lots of issues. It is like being married to a bipolar person 😂
An object lesson in how to create a garbage engine. I wouldn’t touch any vehicle with this engine in. It’s not if it will give issue it’s when.
James,just catching up on your videos now,been waiting ages and hoping that you would do a flipping up series for one dream car to keep,i think it would be great for content and you would have your dream car for a small initial investment
With the Citroen.... get "the wife" to WBAC it for a giggle.?
I dont get the videos headline. at all. turbo problem does every car get after a wile. 👎👎
Chasis mmmmmmm not the best on that age , I would really keep your money. Could turn into a money pit .
Sounds like an interesting trade up project.
It's a Citroën?
It's a crap car with the attitude of the people who made it! 😳
I'm wondering if the noise could be caused by the fuel-air mixture regulator making it run rough or a bad earth connection on the electronic stuff,I hope that you get to the bottom of this issue.
Yeah I'm into you trading up to what you aspire to. You have the skills and ethics to make this work for you, it will be another aspect to look forward to on your channel.
Oil and filter changes and just repeat every 5k
Just sell me those headlight for cheap, I'm in love with those
Wonder if the DS previous owner didn't use it much, hence surface rust on the cam and why it was running rough. A good blast usually does them a world of good and possibly why it's improving with use?
Thats one of my thoughts
The Morgan....free man...would be a good series 👌
Trading up could be interesting 🤔.
Turbo on the ds definite maybe.
Yes be interesting to see if you can flip the 2.5k to buy something special.
To declare that the DS3 engine is poorly designed, just because your car is not well maintained, is a childish act. Stop running around the garage like a child and take your car to a good mechanic to fix it.
Lol! Poor maintained? It has 100% fsh! Prehaps you need to stop typing faster than you research as speaking to any mechanic will confirm these die at low miles even fastidiously maintained lol
Register it in your name, and we buy any car it. If the price is right
Love the idea of a trading up series; that would make an interesting watch. Up! should be a good first car, she's a fancy one too!
Same problem with the gearbox in my Mercedes Vito van which I found out was made by Renault.
Great content again James 👍 if you leave that Micra much longer it will be a convertible 🤣