Razor scooter troubleshooting guide and battery install
Вставка
- Опубліковано 17 лют 2018
- In this video I walkthrough how to troubleshoot problems that could be happening to your razor e100 e200 e300 scooter.
Here is a battery charger: amzn.to/2VJmacj
Here are the new batteries: amzn.to/2Hr3Z3D
Here is a new tensioner: amzn.to/2ECxBxd
Here is a new reset relay: amzn.to/2CtkzfE
Here is a new charger: amzn.to/2FcG7jB
Here is a new tire: amzn.to/2BDib9n
Here is a new throttle and control unit: amzn.to/2C4HBNX
Here is a new chain guard: amzn.to/2CuOUKu
Here is a wiring diagram: goo.gl/4WjRhU
Support the channel through my Patreon: / jrobling
Check out Merch on Amazon: www.amazon.com/shop/jrobling
or Teespring: teespring.com/stores/jrobling
Follow me on Twitter, Instagram, and Facebook
/ mrrobling
/ mrrobling
/ mrrobling
Check out every product that I review or I recommend in my videos here on amazon: www.amazon.com/shop/jrobling
My Gear:
Camera: amzn.to/36jsHBz
Phone: amzn.to/3oN0soe
Lens: amzn.to/3fXb9hT
Light kit: amzn.to/33q4zv4
LED lights: amzn.to/37kHsTV
Sound proofing: amzn.to/36eXvmK
Tripod: amzn.to/2J9txIp
Mini Tripod: amzn.to/3mjlSWa
Shotgun Mic: amzn.to/3qbL0jJ
Lav mic: amzn.to/3qbOB1i
Keywords: razor scooter battery charger test tester walkthrough problem diagnosis issues fix easy step by step wiring throttle ignition switch relay broken power move go push motor dead
#diy #scooter #troubleshooting - Наука та технологія
I'm 73 years old and have been an Instructor or Teacher most of my life. This is one of the best instructional videos on just about anything I have viewed. I wish all videos were as good. Thanks
i guess I'm kind of randomly asking but do anyone know a good website to watch new movies online ?
Coincidentally, I just said the same thing to him. I told him he should be a teacher. He is teacher material.
Are you a teacher? If not, you should be. Your teacher material. Excellent.
Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!Thanks this helped me fix my son's scooter, turns out it was the throttle and I can get it on Amazon for less than $20! Thanks man!
Good to have posting again!
Excellent ingenuity Josh!
Helped to fix mine, thank you so much! I also found mine by the garbage. Mine needed air in the tires and 2 new batteries.
Thanks this was a BIG HELP! ...with the electrical tape tip...
I used a 6.3m spade connector and it seems a little small to crimp...so i did the best i could and used a little electrical tape just to be safe!!
I hope this works!
Thanks again!!
*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
Balls to the walls man. Lol.
Useful lesson hands down. Im most definitely saving this video for future references. For any battery testing/electrical..,! Thx! 《Great for a resource to help son(s) , some friends & possibly my forgetfulness associated with short attention span at times. 》
poa...
only because i like to get str8 to it.. vid was even better at 1.75× speed! "respectfully" and only for an fyi for any1 w/adhd.
I found 3 of these 100 150 200 Im going to fix em then give em to the kids. I actually was going to buy some from Walmart . I dodge that expense thanks a lot scooter guy.
can the brake circuit be disconnected and still have the motor spin?
When you pull the handbrake the circuit opens (which stops the motor). So, No; the plug either has to be connected, or you could jumper the leads to bypass the brake circuit.
Thanks so much 😁I’m figuring this all out it’s gita be my batteries . I also found mine outside somewhere . 👍🏽
Thank you for your explanation, great job now I will work on my daughters scooter
Spot on, great informative vid
Same aswell
I just found a Razor E200 scooter at our Landfill Transfer Station's swap shack for free. It doesn't seem to have any power. I searched online and came across your videos. Very informative step by step troubleshooting with easy to understand terminology. Looking forward to my first attempt at diagnosis the scooter treasure. It didn't have a charger so I may start by attempting to charge the batteries like you described. Thank you.
I read online that the scooter must be going 3 mph to allow it to actually start using the motor. This is a built in safety feature.
This is not a feature in this model
Did you spin the rear wheel first? These have a Soft Start that requires the scooter start rolling forward manually, then the motor kicks in. The first models threw kids off, ran into walls, etc. So they changed it to only activate once it's rolling. Many don't know about that.
Newer models do, this one didn't
Good to know! 👍🏼
Good Video thanks for posting this
Thanks 🙏 bro good scooter is fix
Nice explanation... Thnx 4 posting
Love this video - struggling a bit because it looks like this is the second battery and the last time the person took too much off the wires.
Do you think changing the battery to different one to last long and more miles on a full charge is possible? Like lithium battery? If yes can you do a video to show what is needed?
Or just directions please
I have an E150, do you know if this video is accurate to that model as well? I'm having trouble finding troubleshooting information for it.
Score! Awesome find!
Is it ok to just take the batteries out and replace
fabulous video...i did all tests...mine had a bad breaker switch...cheap fix..
Hey im just a kid and i dont know what of good battery i should get for my e100 cause well im trying to repair and im makeing progress but can you work on a e100 if you find one and if you do get a new battery can you put it in the links below thankyou
amzn.to/2NR16Mx That is the batteries for the e100
How low a voltage will the scooter run on? I have an electric dirt bike which the batteries tested slightly low (about 11.4V), and it would not run at all (even after charging all night) until I replaced the battery. Now I have this 24V Razor scooter that won’t run, and equally the batteries test around 11.4V (even after charging). All switches, motor, and breaker test good. And the voltage drops about 0.5V when you press the trigger, but no voltage is going to the motor. And I have replaced the power unit with a brand new one.
I know the only thing left is the batteries, but I would like to know for sure if there is a minimum voltage the unit will run on? (I hate to just “shotgun” troubleshoot things) 🤨
The scooter can run a longer time with two 12 volt 9 ah or higer batteries. So you can go for like 35 ah or 100 ah? Or ir is too much power for the scooter?
Size and weight when dealing with sealed lead acid batteries.
One question. Why does my battery have a Fuse ? a black little box with a fuse inside. Razor Pocket Mod 7Ah battery with a wire that connects to a black box with fuse in it. well two wires that has a fuse box connect to the wires. and the other two wires go to the Battery connector or what u call it. So 4 wires total from those Two 12volts battery. Why do some scooters have the fuse?
Will the batteries charge if the controller isn't working? Will it run if it's plugged to the wall? Mine doesn't charge and idk if that's the reason it won't run so I plugged it and twisted the handle slowly till I had twisted it all the way and it didn't move. Help!!! I don't want to their it away or spend allot to fix it otherwise not worth it but yeah mine only turns while it's plugged
I bought a used scooter and it take 2 12v batteries. It seems to drain the battery very quickly. I bought the 2 batteries on fb she says they are new. I just go down hill at my job parking lot just to clear my mind. I let gravity do all the work yet I can see the battery dies fast less then 5mins give or take again going down hill. What could a common problem be? The batteries?
What if your charging Port on the scooter is a three prong plug instead of the charging port that goes with the scooter will it still work
Thanyou you help me a lot nice información 👍
WOW!!! When I watch a video and feel that it was a good informative video I will almost always give it a thumbs up, but to be honest have never taken the time to leave any kind of comment, but this video is BY FAR the most informative well put together video on fixing something that I have EVER come across here on UA-cam! You did an absolutely amazing job explaining in detail on how to check, fix, repair or if need be how to replace anything and everything on this Razor E200. Really really good job! I just subscribed to your channel and look forward to checking out what other videos you have posted. Clearly you know how to fix probably anything and if you don’t know how to do it you clearly stated on here you do the research and figure it out before passing the info on to us. I love that!
Wow ❤ thanks brother 😊
does the kickstand have a cutout switch?
You can jump that brake sensor to close the circuit and disable it for testing purposes.
That's what I did on mine (also found next to a trash can).
How do you jump a break
@@jerahflore2866 just unplug it
Will it run with the brake unplugged ?
Do you have to charge for 12 hours in a row? I bought one used yesterday and charged if for 9 hours, but I was weary of leaving it on charge overnight. Do I need to charge for another 12 hours or just another 3 or so?
Hey bud! Yes initially the first charge you want to charge for at least 12 to 24 hours but it will not hurt the scooter if you leave it plugged in, the charger has a built in overcharge protection on it so you are good to go on that, hope that helps
does need a 24v charger or more?
Perfect, thank you so much...
Can i use an old 24v 2,5amp adapter to charge the e100 with?
the charger is suppose to be 24v 1.5 amp so it might be a little too much
Yes, the front tire has a built-in amp-govenor to protect the batteries from those kinds of scenarios, if the front tire deflates its letting you know that it's fully charged...I hope this helps, I once owned and ran my own electrical scootor/bike repair shop, before liability lawsuits, and complaints from disgruntled customers had me shut down...I now focuse my vastly superior electrical knowledge, and know how on rewiring log cabins at discount prices, with no warranty's and customers must agree to not sue me for any unforseen, and unfortunate natural electrical fires which I have no control over...Im also a life coach...
hi, picked up a e300,, had a battery with low voltage, i replaced both and it runs but seems slow, like 5mph, im 220lbs,,, should it run faster?
It should be more like 10 mph
How much amazon got the links can one be good thank bro video
My scooter turns on but when I pull the throttle it doesn’t make a clicking sound but when I plug in the charger then I pull the throttle it clicks so is it the battery or the controller
I got new batteries, I tested the motor and it goes when I connect it to batteries, I got a new throttle and new controller. Still nothing. It makes like a clicking sound(I think in the controller new and old) when I press the throttle.
i have been using razor scooters for a long time now almost 3 years and i find the best one for older people is the e300 its also faster and holds more weight but i like to make mine custom with some spray paint and new throttle and key start and an led battery life light so i know when my battery is dieing.
How do u fix a Razor MX500 battery that won’t hold a charge
I'm probably late to the party, my model requires some speed before it powers by motor. Guess it saves getting thrown off the back from dead stop. Not sure this model's features
That is very good to know! 👍🏼
I found one by the dumpster and am trying to get it working. So I will try that. Thanks!
working on a e300. batteries seem to test good 24 v but the wheel can be stopped by hand. no power to pull but it spins. any thoughts?
That sounds like how my batteries were when I found the scooter, just weak old batteries. Possibly the motor is shot if the batteries are good
@@JRobling was just watching a vid on ' ghost reading ' where it will show 24 volts but no load , cold cranking power. I'm thinking this is the issue. They read good but actually are not.
@@BigAlWillis What video was it? Sounds like my problem too..
@@Andrew-je2pg too long ago to find the video. I was just watching a lot of scooter videos. If your wheel spins then its probably weak batteries.
I have a 300 and it’s doing the same thing I charged the batteries up still doesn’t move
Wow good presentation step by step. but but Why do u have to take the white little box off the old harness or wires. you're just transfering the Wires. you're making it look complicated by taking off the white small box thingy.
9:00 min is when he FINALLY touched wire to battery
How can you charge a 24v battery with a 12v charger, and brown wire is positive and blue is negitive....
How many miles can you go with this battery?
Could it be the fuse
Good video, BUT LOL the piece you soldered to the wire is a f2 to f2 terminal connector. I guess you can solder to it like that, but it is made to change the f2 terminal that was on the battery to an f1 if your wiring was f1 instead of f2. F1 is smaller than f2. Smaller batteries usually have the f1, bigger 12ah or higher have the f2, wider ones.
F2 to f1 connector. phone auto corrected
Love the part where he "gets the batteries out" and presto they are out....but in reality it is worse than towing a battleship with a raft to get out...
just installed new batteries on an e300s and let them charge for 16 hours before use since they were completely dead when they arrived..what happens now is the scooter runs but 10 seconds later it cuts off...hitting reset button works but it still cuts of after riding for 10 seconds...thought it was weight issue but im 185lbs and its rated for 220lbs..power button works and lights up charger seems fine..reset button works so im stumped..watched another video where the guy said it could be the batteries not pushing enough volts since his scooter was doing the same thing as mine...bought batteries from amazon..12volt 9 amp Weize battery...could the new batteries just be faulty..please advise..excellent video too
My motor the diver thing which makes the back wheel turn just keep spinning as soon as I turn my scooter on without me touching the throttlr
Bought mine new for the boys, one works fine, the other never worked. Turns on, nothing. 2 years now.
How do you figure them batteries are bad because the last time I check 11.45 volts is pretty dam close to being a fully charged 12v good battery
Voltage does not guarantee life, If a battery is weak it can still show 12v but can't hold load.
Can u put a lithium iron battery in scooter that originally had sla lead batterys in
Yes
I HAVE A RAZOR E150 SCOOTER. WILL IT INTERCHANGE WITH THE 100, 200, 300?
There are a few differences between the e100-e300. e100 require speed before the motor kicks in and the other dont so the circuit board is different, the brakes for the e100 are for the front and the e200 and 300 are for the rear so the set up is different there, e100-e300 have different wheel types, but the battery is the same for all types
THANK YOU FOR THE REPLY. THAT HELPS.
@@JRobling are you positive the e100s need to be kicked started first..just run with it THEN hit the throttle?
Is the fuse box really that important or can I just bypass it and use the scooter without a fuse. can anybody help? Thanks
Hey. Ino this video is really old, but im stuck on troubleshooting. Do you still help ypur subscribers with wiring? Thanks
Have a Razor electric quad 500, turn on turn throttle, just clicks.. how to fix ?
One thing we found was they're not designed to come on at a dead stop, they must first get on and push like a manual scooter while twisting the speed control on the right side. Once the motor is spinning at a factory set speed, then the battery control kicks in and it runs electrically. The first models started right away and threw kids off and ran into walls, etc. So they changed the controller to activate After it's already rolling. Try that first before replacing your controller.
Anyone having issues with a Core 90 not moving? I have a red light on the switch but when we kick off nothing happens.
It may be running slow because you're only using 12 volts from One battery
They won't move till you get it moving first does it make a click when you turn the throttle try turning the wheel as fast as you can then throttle.
That is the 100W motors that do that. The E200 is a 200W motor that has enough torque to start without a push.
the problem with these is if u have to replace the expensive batteries you may as well toss it in trash because ...these have little to no value...they sell for 20-30$ used in good working cond in my area and 2 batts cost about 40$...so dumping 40$ into an item thats worth at most 30$ doesnt make sense.
Works now?
I have e300 razor scooter I have changed the batteries but it's still not holding the charge
What i can Do if the box that is all That is not there
☆☆☆☆ ★ Thank You!
I found mine by a dumpster too 😂
You don't need to mark the connectors every connecotr is Unique Can't get it wrong
connectors are all unique to each other, their different
how tighten throttle
Why would one of my new batteries get hot when I charge them
My mother bought scooter at a pawn broker and it charges the light turns on and it runs for about 4 feet then like the power goes dull and begins to loose power ...can anyone help it does anyone ever run into this problem
You need to give it a little push
If power button is not coming on, could that be battery. Also my power button is loose.
It should light up . Bulb is dead, battery is dead or wires not making connection.
Has el video en español por favor
Go saying problem my do the click to the light on to don't stared
Y does it need 2 batteries?
thz
I like the part when he says it don't go nowhere
Brakes
De-pressed vs Pressed
Isn't pressed Is Pressed?
Is Not stopped Stopped
That's all you have to do
Necesito el cable de la batería
Tha problem you battery you fit it don't now what battery need for my it old Racer 2013
The voltage shows that the batteries are at a 10% State of Charge....they're dead, especially after charging them for days!!!🛴👎
Does any one know how to change the batteries on a 360 Xtreme adult scooter?
Plz get back at me!
My name is Mark.
Great video, easily could have made it under 10 mins though.
We bought the G- kids one a piece you have to get it going before the motor will engage , the Moyer won’t start until it’s in motion
s500 is slow , how increase speed
I found a scooter but missing a controller
Don’t you have to kickstart that