Two part polyurethane waterproofing rubber coating

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • Sinomaco two part oil based polyurethane waterproof coating is a reactive curing two component high polymer waterproof coating consisting of A and B part. The part A is a kind of prepolymer prepared by polymerization of polyether resin and diisocyanate; and component B consists of vulcanizing agent, catalyst, resin, etc. Components A and B are mixed in a certain proportion, stirred evenly, coated and scraped on the bottom layer, and an integral and rubber elastic waterproof membrane will be formed after curing reaction.
    The A part is a polyurethane prepolymer in white color and the B part is the curing agent in black color. Upon applycation, both A and B components will be mixed according to a certain ratio, normally 1:2. then to be applied on the working surface of the construction buildings, and after reaction, it will cured into a continuous, flexible and seamless rubber waterproof layer in black color through reaction for waterproofing.
    Product Features
    ① The product has stable performance, good weather resistance, high solid content, and reliable waterproof performance;
    ② Strong adhesion, liquid construction, room temperature curing, convenient operation, short construction period;
    ③ Many other places It has excellent elongation and tensile strength.
    ④ Has excellent low temperature resistance.
    Application Scope
    ① Different types of underground waterproofing, waterproofing for basement floor, inner wall, outer wall, nurse wall, tunnel etc.
    ② Roofing system waterproofing, bathroom waterproofing, kitchen waterproofing, balcony waterproofing, iAny sink or tank waterproofing, wall pipe, drainage, etc.
    ③ Many other places;
    Packaging & Storage
    60kg/set(A part 20kg/pail, B part 20kg * 2pails)
    Room temperature storage in 9-12 months
    Reference Dosage
    The amount of 1.0mm thick coating film prepared according to the weight ratio of A: B = 1: 2 is approximately: 1.3 ~ 1.5Kg / m² (if special parts are to be waterproofed, you can add a release fiber cloth or Spinning.)

КОМЕНТАРІ • 3

  • @chessPrabu
    @chessPrabu 3 місяці тому

    What sorayer hae to be used for this application?

  • @sinomacowaterproofing
    @sinomacowaterproofing  8 місяців тому

    Kindly contact us with
    WhatsApp: +86 151 0697 1219
    Email us:info@sinomaco.com
    Http//: www.sinomaco.com