Explaining Dorman's OE FIX 4WD Hub Actuator Delete for Ford and Lincoln Pickups and SUVs
Вставка
- Опубліковано 1 жов 2019
- The internal diaphragm on certain Ford and Lincoln vacuum-activated hub actuators is highly failure-prone. This patented Dorman OE FIX replacement (600-405) restores 4WD while eliminating the problematic original functions for greater reliability. This video explains what makes this solution a smart fix for older vehicles.
Other features and benefits include:
Dependable solution - this unique hub locking actuator delete enables 4WD operation while disabling the failure-prone original vacuum function
Cost-effective fix - deleting need for troublesome vacuum saves future replacement cost and frustration
Patented design - exclusively engineered in the United States by highly trained automotive experts
Fully reversible - actuator includes vacuum caps for holding remnant lines and allow for restoring original function in future
This unique solution fits select vehicle models, including Ford Expedition 2015-03, Ford F-150 2015-04, and Lincoln Mark LT 2008-06, Lincoln Navigator 2015-03. To learn more, visit the product description page for this part: www.dormanproducts.com/p-1017... - Авто та транспорт
Wtf? You might wanna explain to people that means your front drive shaft and both axles will always be spinning ALL THE TIME. more wear and less gas mileage
Your front axles will be engaged at the hub, but they'll still spin free at the transfer case. You're probably looking at a little more wear on the axle seals and shaft joints, and maybe a slight drop in gas mileage. Then again, none of the vehicles that this kit fits are exactly known for their wonderful fuel economy.
@@DormanProducts DODGE BEEN THAT WAY FOR YRS...JEEPS..DAKOTA..RAM..MANY RUN FRONT AXLE ENGAGED..A SMALL PRICE TO PAY ON F150 ..OR YOU CAN BE REPLACING BEARINGS..AXLES..AND ACTUATOR AND BIG COST IN FUTURE... JUST REPLACED 6 MONTH OLD BEARING..ALL TEETH CHEWED OFF...THINK YOUR PRODUCT WAS GREAT SOLUTION TO SAVE FUTURE ISSUES..
@@Azhxd LOL..EVER DODGE..FORD OF OLD..RANGERS HAVE AXLES TURNING...SO I THINK NOT....LOOK AT FORD F150 IN 2000 ERA...AXLES DONT HAVE IWE...
@@southpawsgarage YEP! That's the way 4x4 should be! I understand why 2500 and up trucks use them. But my f-150 does not need that bs.
NOBODY MENTIONS RUINING THE FRONT TIRES!!! THATS THE WHOLE REASON THEY DISENGAGE!!! YOUR TIRES WILL GET CHOPPY AND NOISY AF!!!
I ordered 1 for my 2013 Ford F150... Cant wait to have it installed.. ☺️ Greetings from doha qatar ☺️
Can you tell me your review is it worth it for 4” lifted daily drive?
Nick bro impulse lives on hop all is well I miss them days Blue Jetta forever!
Found out my iwe was dead on an extremely snowy winter klondike camp out. Decided it won't happen again. Installed these with no problems. I really like the fact I can grease these moving parts. Guaranteed to be locked in now. No fuel mileage or turning issues. I do notice the extra vibration from the front drive shaft always turning but thats the point. Can't wait to really try it out.
Awesome. Happy to hear it.
Can’t wait to try these. I have replaced my iwes twice now within 5 years. The second time I disconnected my hose so they were always locked in and I knew my 4wd would work when I engaged it. I took my truck into the shop for some new wires ran for the abs and they noticed my hoses were unhooked on my iwes (which is what I wanted) so they plugged them back in and causing my iwes to be halfway engaged and ruining them again:/ I’d much rather have my front wheels always locked in then rely on the oem which I’ve seen fail not only on my truck but several other f150s
Is it possible to block the IWE of my ford expedition so that my front bars do not turn, since I have the 4x4 disconnected
Just ordered the set for my 2015 F150. Even with the vac line disconnected the stock IWE still pops under high loads. Time to fix it for good!
780brando i could not find these before to save my life and was convinced they didn’t exist!! How are these for you? So they allow you to choose auto or manual or is it one or the other and you have to remove the hub and reverse it
@@KollynJ Where were you trying to order them from? We can help you with that.
Did this fix the popping? I'm getting a loud ass pop under stress & can not figure it out.
@@MarcusMimo yes, the popping is the weak oem IWE slipping. Dumping them (stock iwes) for this dorman solution or the other one should make it quiet & always at the ready, as it ought to be. I've been happy with mine
Dorman - can you provide a summary on the benefits of this delete, over the RCV ring?
I can imagine being a closed system it prevents element exposure to the CV/hub, but unlike the RCV rings, I imagine it also has the ability to break in the same manner the OE part does?
That is a great question! Here is a link to some more information on this delete. www.dormanproducts.com/p-101732-600-405.aspx
If you need any further assistance or have any other questions please call Dorman Products Customer Service at 1-800-523-2492 or e-mail at CRDorman@Dormanproducts.com.
As a corollary to that, you may find this helpful, too. www.dormanproducts.com/pages/products/stories/hub-actuators.aspx
A vacuum leak is a little less worrisome when you just have locked hubs all the time. It functions like most people run manual-lock 4WD trucks in the winter. -Lem
Is yalls OE replacement version of the iwe had a wide contact section? Not the delete kit,yalls vacuum oe replacement yall sale. It would still be a bit of an upgrade if yall have a better/wider/stronger tooth engagement contact area. Please let me know what yalls differences are to oe ford.
Hello, great question! Part #600-105 is a direct replacement for the OEM part, no additional upgrades were made to this particular part. Thank you!
Dorman, I just got a pair of these IWE hub actuators installed. Question is, since now my axles are turning all the time do I need to replace the front differential fluid to extend the longevity of the internal components of the front differential?
Never a bad idea, certainly, but you also should be able to stick to the factory fluid replacement schedule if you choose. -Lem
@@DormanProducts going to ask a dumb question here, so the axles are locked to the hub in 2wd with this IWE delete setup (great concept!) While in 2WD does this mean that the front differential is now also turning gears at the same speed as the rear differential?
@@whitesr20 The front axles aren't under power until you kick in 4WD. -L.
Well I am just order this kit wondering what am I expecting with this kit when it comes to wear in the front differential, do I need to change the front differential oil often? Also what axels CV boots should I buy? To keep it for failing something else? thanks
I just asked this question as well. I am thinking it wouldn't hurt to drain and refill the front differential fluid.
The rear diff spins all the time, and there is no problems with it.
So after installing this kit you won’t have to connect the vacuum lines back into the new actuators? Thanks in Advance.
Hi Jorge! To your question- no you don't need to hook up that vacuum as it is blocked off. However we leave the hose end cast onto the hub actuator so you can reattach it there when you are ready to use it again and it is out of the way.
Wouldn't this also change your turn radius and add to tire wear?
Hey Jacob, no, the 4WD is not engaged, so it should not affect your turning radius or add tire wear.
Hi , i have enquire
I have ford 150 2017, ecopost, i have to much sound come from front tyres , the maintenance toald that to change Actuator,
There is permanent solutions?
Hello Khalfan, the 600-405 doesn't work on a 2017 model year F150 and unfortunately we don't have a part available for that year. I will let our product team know of your new product idea. Thank you!
Essentially a person could just disconnect the vacuum hoses to the actuators to have them engaged all the time then, no? Unless of course they are stuck in the disconnected position.
This idea makes sense, but we've never tried to use the OEM style vacuum actuator in a constantly locked position to see if it will hold up to every day conditions like we have designed and tested our OE Fix kit to do.
@@DormanProducts fair enough, thanks for the response.
I removed mine while doing the ball joints. Cleaned them up but don’t know what type of grease to use and how much. Can’t find that anyplace
Good question! The grease wants to be a high temp wheel bearing grease!
Installed this on my 2010 f-150 yesterday. Doesn’t drive any different whatsoever. Happy so far. My only issue is that I wish these came pre-greased or at least have batter instructions on how much grease to put in through the grease fitting. I would have a hard time imagining you can just pump her to the brim with grease. I ended up pre-greasing the part by hand before I installed and then put in another 3 pumps through the fitting. If someone else knows that i need more grease than that it would be nice to know.
Where can I find out how much grease, and how often to regrease
Hey Jeff, please reach out to our Tech Support team during the week with any specific troubleshooting questions. The number is 866-933-2911, and you can also send us a message here: www.dormanproducts.com/pages/forms/support.aspx
Will this fit 2016 models?
Hey Grant, sorry for late reply, you can get most up-to-date applications for this part here: www.dormanproducts.com/p-101732-600-405.aspx. As of this comment, looks like our research is showing this would not fit a 2016 model.
Will these work with auto 4wd t-case
Hi Adam, yes!
Will they fit on a 2018 3.5L F 150 ?
Hi Jason, great question! These are all the recommended parts that we offer for a 2018 Ford F-150. www.dormanproducts.com/gsearch.aspx?year=2018&make=Ford&model=F-150&origin=YMM
Can anyone verify if these work for 2016-20 trucks? I don’t see any reason why factory IWE hubs would be different
Hello! Unfortunately we do not list them fitting. We base our applications off of the OEM part numbers it would fit. Unfortunately that supersession stops at 2015 model year.
After installation I lost 2mpg. I drive approx. 500 - 1000 miles a week, so this is significant. Plus the added noise from the axles always being engaged is kind of annoying to me. After about 3000 miles on these Dormans, I'm switching back to OE.
Hey Bruce, sorry to hear that. This solution might not be for everyone, and it's good to know that going into it. Just FYI, we do also have a direct replacement that doesn't delete the vacuum functionality: www.dormanproducts.com/gsearch.aspx?type=oesearch&origin=oesearch&q=7L1Z-3C247-A
Does this mean 4x4 is always engaged?
Nope. The hubs spin the driveshafts, but 4x4 can be disengaged normally. -L.
Will this fit 2013 raptor??
Hey there, you can get detailed fitment info on our site: www.dormanproducts.com/p-101732-600-405.aspx
Yep that seems a good fix but there will be another issue - these trucks are 4wd, they are not intended to be awd all the time, so you will also get faster wear of front differential. Correct me if I am wrong
Hey George, no problem, common misperception (and probably not a good enough explanation on our part). Locking the hubs doesn't engage the 4WD. Here's an additional explanation on our website: static.dormanproducts.com/document/600-405_case-study.pdf
PUT SET OF THESE IN TRUCK FOR FRIEND AFTER REPLACING ACTUATOR AND BEARING 6 MONTHS AGO..AND DOING IT AGAIN TODAY AFTER EATING UP BEARING......AT 700 DOLLARS CANADIAN FOR BEARING HUB THE 300 FOR THIS KIT AND ELIMINATING FUTURE ISSUES IS NO BRAINER...WORKS AMAZING..CANT WAIT TO SEE WHAT FRIEND THINKS AFTER DAY IN THE MUD...HE IS OILFIELD OPERATOR AND ALWAYS IN NASTY PLACES..
That is awesome to hear that you are enjoying our kit! Thank you so much for your feedback!
for FUCK sakes guys THIS DOES NOT LOCK IT IN 4WD!!!!
FRONT DRIVE SHAFT NEEDS TO BE SPINNING THE DIF TO BE IN 4WD
2WD WILL BE FREE SPINNING AT THE T-CASE!!!
Uhhhh what about 4x4 with no lsd in the front
Good question, being an lsd does not affect the hub actuator delete kit!
Is it possible to block the IWE of my ford expedition so that my front bars do not turn, since I have the 4x4 disconnected
Hi Jorge, part # 600-405 locks the hubs continuously, removing the failure prone vacuum system from them, but unfortunately it will not do what you are looking it to do.