xr200r shock service
Вставка
- Опубліковано 25 кві 2017
- Rear shock service including seal, upper bearing, and bump stop replacement. Purpose of video is to go over some of the main points, and what I experienced on my first rebuild. Any positive comments are appreciated, Thanks!
was hoping for part 2 but no more! why!? Thanks for posting this!
buenas tardes líder dónde puedo conseguir el reemplazo de mi amortiguador desde República Dominicana gracias
Great video, thanks for the info. Say, you'd make a great dental tech !!!!
Are you a hygienist?
yes, a hairy one
lets go riding sometime
Did you have any issues getting the damper rod out? I cant seem to get it to come out. Both circlips are out, but it feels/sounds like its getting stuck on something.
What is the torque spec for the nut that holds the Piston assembly?
How did the 3wt oil work for you?Thankyou
Men you should assembly the gaz tank with the shock and put gaz tank upper. Full the shock and the tank completely with suspension fluid and move the shock slowly until all bubble go out. Let rest the shock some hours and insert the nitrogen chamber in the tank pushing all the excessive oil by the nitrogen chamber out just enough to put the clips inside. Then full the nitrogen...
clamp bottom end softly in a vise, place a large adjustable wrench on upper end and tap upwards.
Awesome man!!! Thanks a lot! Now I can sleep through the night. What weight shock oil did you use??
I used 3wt shock oil
Mobile 1 atf
I did my XR250R that had this identical shock (the old one was shot) and I used Maxima 7wt
wht is the measurement eye too eye 15"? anyone herd you can use an 85 shock on an 83???
I believe it’s 13.25” kind of an odd size. Early xr200r bikes had a rebuildable shock. In ‘92 I think they went to a non-rebuildable junk shock and reduced the travel a little over an inch.
that isnt xr200r shock.. they dont include nitro bottle
xr 200r have reservoir, xr200 has no reservoir.
1984 xr200
The year matters anything 92 and up doesn't have a nitro bottle