Це відео не доступне.
Перепрошуємо.
Honda CR-V 2018 Subwoofer + Amp Install, Speaker Upgrade, Sound Deadening
Вставка
- Опубліковано 27 січ 2022
- Ultra high quality aftermarket speakers were upgraded into a 2018 Honda CR-V together with subwoofer and amplifier installation. A roll of sound deadening material were applied within the door panels to achieve a full-music immersion by eliminating rattles and vibrations that can cause unwanted cabin noise. Installation done at the customer's residence in Butuan City.
Focal Performance Access 165AS 2-way component speakers for front doors while Focal Performance Access 165AC coaxial speakers for the rear doors as well. Massive GTX 122 12 inch 750w RMS subwoofer in an L-ported stained plywood enclosure I have done a few months ago, and can be watched on this link - • How to Make L-Port Ply... is also put into the system. Subwoofer is powered and driven by Lightning Lab LLBA1500.1F 1500w RMS @ 1 Ohm full-bridge mono amplifier.
An active line output converter is installed within the headunit and tapped to the rear speaker channels for the subwoofer signal. High quality low resistance 5 meter RCA cable is used and tested using PAC TL-PTG2 speaker test tone generator.
Mini ANL fuse holder with a 150 ampere fuse is used in protecting the 4 gauge power cable. From now on, I will be using mini ANL fuses because they are compact and has higher build quality than any other fuse holders. Also they are super cool too.
I forgot to film the installation of subwoofer bass knob on the blank dashboard switch panels because it was getting dark and time is very limited but I managed to install the knob seamlessly on the blanking switch panel.
00:20 - Components to be used in the car audio upgrade.
00:40 - High quality line output converter for the stock headunit.
01:00 - Testing RCA cable using all-in-one car audio tester.
01:15 - LOC or line output converter is securely tied at the back of the stock headunit.
02:00 - How to fish power cable from engine bay through firewall of Honda CR-V.
02:15 - Removing Honda CR-V OEM door speakers.
02:35 - Applying sound deadening material within the door.
02:45 - Applying sound deadening material on the inner door panel covering the holes.
03:00 - Focal Access 165AC coaxial speakers and speaker foam rings.
03:20 - Drilling bolt holes for the aftermarket 6.5 inch speaker spacers.
03:35 - Stainless steel flange bolts and nuts.
04:10 - Secure the crossover network using cable tie and double sided tape.
04:30 - Sound testing coaxial speakers with foam ring installed.
05:10 - Mini ANL fuse holder mounted on the sturdy battery tray.
05:30 - Full range mono amplifier is installed under the back seat.
That is all for today's car audio install and again, I hope you all like the show and I hope you stay subscribed to my channel for more future car audio builds and installs. See you soon. Have a nice weekend!
The Philippine spirit is amazing. So happy to have you as an ally. God bless you all. Excellent build! Blessings from America
Welcome aboard!
Very nicely made box and beautiful clean installation, I wish you all the best🎶
Many thanks Tom 😎🧨🧯
NICE!
Good Work!
Thank you! Cheers!
awesome dude 👍 oem fit speaker spacer also work great and clean without modify a new hold. i use that oem spacer on my civic 2014. actually newer honda car use a same speaker and holder
Thanks. Yes i saw oem spacers for Hondas but it would take another 2 weeks to arrive so i started the project asap using standard spacers
I noticed that the hole of the new midbass on front door at the back is narrow than should be. It will create acoustic short circuit.
Amazing
Thanks Lemak
Miss you my friend
New video soon
good one sir
Thanks manyu
Naka pa Ganda Naman background music idle
Hello a great video perfect job 👍👍👍greetings from Germany 🇩🇪 👋👋👋 Kai 🙏🛠🔊🔊🔊🔊
Hello 👋
Very good.
thank you Dilson.
@@chrclmnky I would like to see a 2.1 home theater project. I'm from Brazil and I really like your videos and your dog. 😃
Graet
👍
Sir plz make a ported box for home 12inch subwoofer plz 🙏
ayos boss! Focal Nambawan!
Yisir nambir wan. 😅
@@chrclmnky kakabitan ko din ng Focal isa kong kotse next month
Your language almost same as ours. Peace from your neighbor
@@muhammadnajibridho3455 ok brother
@@muhammadnajibridho3455 really? where are you from brother?
top👍👍
Thanks tomy
This is kool I guess I’m back to the bass life wish me luck boys lol 😂
Yes we are in this together. 🤘👍
just did install in 2018 crv. everything works great when parked, but over about 6mph subwoofer plays solid with volume all the way down until i slow down. any ideas????
Must be the head unit doing a safe mode. There is a wire that must be connected to the ground in order to play music normal even when driving.
I remember it was a green wire or pink.
this sounds like the ANC noise cancellation system. I believe that must be disconnected - so you lose the ANC but it will stop the problem.
Hello, I want cabin dimensions for 2 massive tko-12 800rms, can you help me?
Sure. Email me. Info in about section of this channel. Thanks.
Hi can you make a casrom sub box project for me please? I would like to build it my self. I would like to have double L ported sub box
I got x2 12" oe subs 3700W RMS EACH
amp bassface db 1.6
Sure. Send me an email.
@@chrclmnky info_durus
@@chrclmnky @
@@chrclmnky o2
Bro your fucking house is beautiful!!
How I wish it's mine but customer's. 😭
@@chrclmnky I saw that in the description after I posted. Nice job anyway. I have a 2019 CRV Id like to hook up the stereo in. Thanks for posting!!
is there center tweater installtion for 2018 crv any wiring in the dash?
Hello, good question. I think there were no tweeter or any speakers in the middle of the dash.
@@chrclmnkybut there is space to install it?
@@chrclmnkyalso if I just replace the speaker without a amp will it sound better with the 2 way speakers cuz I already have a sub
This one has thenfactory amp? How did you bypass it?
No there wasn't. Headunit also has been upgraded.
do you have the wire diagram
Wiring is very basic no need for a diagram.
which wood better for box, plywood or mdf??
Same
Plywoodmarine type
Its the best quality here in Philippines 3/4inchthick marine
mdf is heavier and cheaper than plywood but its not as durable and the saw dusk is toxic so wear a mask when cutting. as for sound resonance the guys who compete in sound quality competition prefer mdf cuz its more dense but to normal people like us you wont hear a difference. for plywood make sure youre getting a good quality, little to no voids/ holes between the layers is what you want. if you have money to spend get russian baltic birch plywood
@@rowboyto156 Thankz rowboyto♥️
hi What is the Black box for the rca in the backthe stereo
Line output converter
boss davao ra ka boss?
Butuan City sir. Pwede ra pod ko mo lusob ug Davao anytime.
Boss ask ko lang po kung alin mas qualitys L.L.2xl or xmax 1000rms??? Salamat
Same lang
@@chrclmnky boss bibile kc ako ngaun pinamimilian ko kung alin mas mahal ang xmax1k.rms sa L.L.2xl alin kaya sa dalawa ang bibilhin ko wala bang pinag ka iba s specs?
Boss kung ikaw ang bibile alin ang pipiliin mong bilhin un 2xl? Or xmax?? Salamat boss dko makapagdecision e kung alin bibilhn ko
@@gilbertcruzada2899 nabili ko na silang dalawa
2XL - ua-cam.com/video/tPU4xA256ME/v-deo.html
boss maganda po ba yung targa na subwoofer slamat sa sagot
Hindi
@@chrclmnky anu po maganda recomended nyo na subwoofer
@@edgarrigos250 anything expensive
@@chrclmnky around 5k its ok thank you
@@chrclmnky infinity its ok
Waste of time video.
Ok