Toyota HiLux Subwoofer & Speaker Audio Upgrade DIY + INSTALL + BASS TEST
Вставка
- Опубліковано 19 жов 2024
- One hell of a massive car audio system upgrade done into a 2022 Toyota HiLux Conquest pickup truck with its stock OEM infotainment still fully intact. An extensive car audio system upgrade has been successfully installed into the stock OEM infotainment of this 2022 Toyota HiLux Conquest pickup truck.
Custom-made sealed subwoofer box that holds 2 pieces 8" 450w shallow-mount subwoofers, perfectly fits behind the seat at the crew cabin of 8th Gen Toyota HiLux.
For box measurements, here's the link to TinkerCad 3D object:
www.tinkercad....
KEY NOTES
1. Custom-made trapezoidal subwoofer box & amplifiers mounted behind the seat in crew cabin.
2. Brand-showcasing tweeter grill mounted, custom modification.
3. Brand-showcasing speaker woofer grill mounted. custom modification.
4. Original factory infotainment system is still in-tact and in use.
5. Component speaker crossover is neatly wired & sturdily mounted.
6. Toyota specific speaker spacer & 3M speaker foam ring.
7. Hantek oscilloscope is used to check polarity & gain levels.
8. Box is firmly bolted using factory embedding nuts within the cabin crew wall railing.
9. Dual 8" 450w RMS shallow mount subwoofer wired in 1 Ohm, just about right to draw 1000w off the amplifier.
AUDIO COMPONENTS:
Focal Access 165AS 6.5" component separate speakers
Focal Access 165AC 6.5" coaxial speakers
2 x Category 7 CSW-FL450 8 inch dual 4 Ohm shallow mount subwoofers
Category 7 CSA1000.1D 1000w RMS mono block amplifier
Category 7 CSA90.4D Class D 4 channel amplifier
Acoustipad Sound Deadening
Custom-made MDF trapezoidal sealed subwoofer box
Custom-made amp rack
You are always great.... Your neighbour who loves music system are very lucky.... ❤❤❤❤❤ from India, Tamil Nadu, Trichy ❤❤
Your explanation and visuals are both very clear and engaging. One day, I will definitely have you build a home theater for me. Keep making videos like this, I will always support you! 👏👏"
Thanks brother. 👍☀️
Another exceptional video. You are very good at what you do and inspire us to want to do it too. A hug from Brazil.
i watched the part 1 of this build with the truck's owner's(?) channel and i was asking for the part 2. here it goes then!
solid and neat build as usual! if only we could have an audition all the way. that 'kontra bida' hammer it is 🤐
great build. what is the internal volume for the enclosure?
Have you considered doing an underseat install using seat risers?
@@jazzzenadvincula1031 watch my other videos there are a bunch of seat riser type boxes
Hello a great job 👍👍👍perfect 👍👍👍greetings from Germany 🇩🇪👋👋👋Kai 🙏🍻
Thank you! Cheers!
what are the measurements of subwoofer box please reply
Nice🎉😊
🎉
Ka power kaau bai..
👍
Sneaker pimps. U should have let that one play!
Play it in the next video,,all the way through.
Thanks ,,,and
Great job 👍👍👍👍
I like too and I wish I could but UA-cam will drop the copyright hammer on the video as soon as I upload. 😥
Fine 🌹 #gurukul sir
@@GurukulSir yes
Hi Sir, how were you able to get RCA outputs from the head unit for your amplifiers? Thank you.
@@moxnatividad3821 hello, I used a line output converter
@@moxnatividad3821 i suggest the SoundQubed QLOC-5 5 ch line output converter
Can you tell how much was for the equipment?
which equipment?
👍👍
Good day po, san nyo po pinadaan ung supply patungonsa amplifier?
@@jerielde5994 right (passemger side) there is a grommet on the firewall you can fish the cable down to kick panel then on side gutters all the way to the back.
@@chrclmnky kasya po power cable or need mag drill? last ko chineck parang wala vacant e. huhuh check ko uli mamaya. thanks. for high output san kau kumuha ng connection?
@@jerielde5994 oo kasya naman po gauge 4 or even gauge 2. May rubber grommet po hanapin nyo nalang.
No need na mag drill. Tanggalin lang rubber grommet. Then gamitan ng lotion o anumang padulas para dali lang mag pa lusot ng kable.
@@chrclmnky sige maraming salamat po
Can you tell me the dimensions of the subwoofer box ?
I wanted to find a similar one here in Brazil, for my hilux
Hello Lukas, there is a link to the TinkerCad 3D schematics in the video description. You need to create an account and login to TinkerCad so you can start using it and seeing the dimensions. Use laptop or computer web browser to open TinkerCad.
@@chrclmnky Hi, thanks for helping me, I couldn't find the link.
@@LUKASSENA oh sh*t forgive me I forgot to put it...
Here's the 3D object to TinkerCad link: www.tinkercad.com/things/heYacXiroXA-hilux-2-x-8-subwoofer-sealed-box
Hi Sir Ask ko lang po Mag Kano po mag pa Assemble ng Speaker Dual 12" inches po
evening po, kindly inbox me on Facebook page @ChurchOfBass, thanks
hello bro can you please deisgn me box for toyota corolla 2016 sealed enclosure tune to 32 to 35hz the woofer is pioneer TSW3003D4 Rms rating 600 and peak 2000 watts
Sure
ALL u have listed
@@vigaba yes right in the video description. Thanks.
@@chrclmnky兄弟Thⅰs 8 ⅰnCh subwoofer什么價錢?
@@chrclmnky兄弟你试试用FAST&FURⅰOUS的CD版光碟的歌曲然後把那BASS按掣扭到最劲试试对低音炮😊
What is the name of the first song
sorry i forgot