That looks good man! Now would be a good time to start working on the 24v VR-6. Then the car can be a VR-6 like miley just think,vento hatch back beat of both worlds. Oh and the hatch back will have to go "AIR RIDE"!!!!!!!! That will be sick. Let's go
I've always left the front tires on the ground as I cracked that top strut bolt. Never had it spin on me once threw my experience with parting mk3s and my mk3. Best of luck hopefully someone sees this
Yo Christian, I had that same problem with my scirocco where it would bog down after reving. Try to see if your ground is corroded. Mine ended up being my timing was too far advanced.
U should put a remus exhaust on it after it's fixed.... trust me , my dad had a full remus exhaust and it was loud ( also , don't judge me grammatically , I don't really speak english )
What happened to your intro?? Also what brand are those coilovers?? All you need now is a alignment. Check O2 oxygen sensor maybe. Cars ride height looks so much better tho. Good video as usual bro.
I would check the ignition switch and test with two wires to start the car. The switch only cost 15€ or less. Has the car the original alarm system? In German called DWA. This could also make problems like you have on the Savoy. If the DWA Control Modul has bad Soldering Points your car would randomly die.
C’mon man your not a noob. Release the hand brake, the car will settle
Hahaha I was waiting for your comment on that brov 😂😂😂 Chris is excited man
So much content on this channel 🔥🔥, big ups bro👌🏽
Lows!!! Looks great. Good luck getting running issue fixed.
Looks so good with the stock wheels on.
That's a nice height for the Savoy!!! Love it. Now it needs to act right...
Looking good 👍🏻 just hope it starts working soon.. That colour looks soooo good!
Cheers for this man, going to be swapping standard struts out for coilovers in the next few weeks :)
Love the ride height on the Savoy
Looks great lowered Bro!
Been waiting for this day🤓
your car seems to have a nice condition especially the paint!
That looks good man! Now would be a good time to start working on the 24v VR-6. Then the car can be a VR-6 like miley just think,vento hatch back beat of both worlds. Oh and the hatch back will have to go "AIR RIDE"!!!!!!!! That will be sick. Let's go
Nice hermano
Try to swap out the ecu and the cam sensor I have a friend who had the same issue and this fixed it.keep up the good vids
Mk3 gang gang gang gang gang gang gang gang
I've always left the front tires on the ground as I cracked that top strut bolt. Never had it spin on me once threw my experience with parting mk3s and my mk3. Best of luck hopefully someone sees this
I was thinking that would work and now when I install my own I will have confidence knowing that you once spoke these words.
Nice work, we also have install videos Thank you for the content
Yo Christian, I had that same problem with my scirocco where it would bog down after reving. Try to see if your ground is corroded. Mine ended up being my timing was too far advanced.
Looks cool
U should put a remus exhaust on it after it's fixed.... trust me , my dad had a full remus exhaust and it was loud ( also , don't judge me grammatically , I don't really speak english )
Lower front little bit and raise the back up a little ;)
00515 - camshaft position (hall) sensor (g40) 03-00 -no signal
What happened to your intro?? Also what brand are those coilovers?? All you need now is a alignment. Check O2 oxygen sensor maybe. Cars ride height looks so much better tho. Good video as usual bro.
Maybe air and fuel pressure needs to get recalibrated? I have and Mk2 8v and this was my issue
Hey, did u try the Temperature Sensor at the coolant flange?
Leave the hubcaps off, looks sick
Why dont you remove the helpersprings and the bumpstops? It will drive better and for more lows
Look awesome 👌😍
I would check the ignition switch and test with two wires to start the car. The switch only cost 15€ or less. Has the car the original alarm system? In German called DWA. This could also make problems like you have on the Savoy. If the DWA Control Modul has bad Soldering Points your car would randomly die.
I dont think is going to pass inspection in germany with those on because of tuv
Was thinking the same thing
I think the same, you gotta go JOM/TA Technix...
@@jaimeromano8786 Yes, or something that is tuv approved otherwise it won't pass I'am affraid
Let's see... But yeah, It might be hard to pass these Maxspeedingrods (I think they are...)
Test fit Miley’s wheels on the car again now that it’s low!
How much you want for those rims that you have in the golf?
What coil overs should I use?? I just bought a 98 VW Jetta Gt
does this guide also apply to the mk3 vr6 jetta?
Do you have a gap on the top mount ?
I want coil-overs sooooo badly 😞 does anyone have any for a mk3 that they no longer want/need? 🙂👍🏼
Heey check the O2 oxigen sensor
try to change 2 oil sensors. just try. they r cheap
Bilsteins were factory shocks?
Those are Bilstein OE B4 replacements.
add a lil background musiic broo
Круто
Fix your exhaust and Check how Low you can go and get approval by tüv or the police gonna impound your car
I've riding on Bilstein PSS9's 😂
strictly static gxng!!
@rowanmol_ig my car its my daily
Hi, ur problem is 99% ecu open it i had same mk3 and same problems i change all sensors,sparks, spark plugs and after all that i find water in ecu.
Your poes