Thocky Budget Keyboard - Lucky65 Build & Sound Test

Поділитися
Вставка
  • Опубліковано 29 гру 2024

КОМЕНТАРІ • 125

  • @freekick042
    @freekick042 6 місяців тому +6

    clear spacebar is very interesting for that led position.

    • @itssamueltan
      @itssamueltan  6 місяців тому

      Yeah and I'm glad someone noticed 🤣 it's because you can use a split Spacebar as well.

  • @schmeglyomigy6174
    @schmeglyomigy6174 7 місяців тому +4

    Hi, I currently have a tester68 keyboard. I was thinking about swapping my switches and keys over to another board. I have gateron milky yellow switches. Would you recommend I swap it over to the GMK67 or Lucky65, or that I just stick with the Tester68? Or, if you have any other 60/65 keyboard recommendations, please let me know. Thanks in advance.

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Well the GMK67 is a great budget option. But if you have more budget to spend the Lucky65 is great too. Just depends on your budget

    • @schmeglyomigy6174
      @schmeglyomigy6174 7 місяців тому

      @@itssamueltan Ok thank you. If I am going for thock, does the Lucky65 have a better sound than the GMK67?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      @@schmeglyomigy6174 yes the Lucky65 sounds better imo

    • @schmeglyomigy6174
      @schmeglyomigy6174 7 місяців тому

      @@itssamueltan Ok appreciate it. Do you think the GMK67 sounds better than the Tester68?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      @@schmeglyomigy6174 definitely

  • @apeman157
    @apeman157 3 місяці тому +1

    would you recommend this over the hi75 in terms of build quality and sounds? i also heard the sound consistency is better than the hi75. i currently am using a gmk67 and would like to upgrade an alu board

    • @itssamueltan
      @itssamueltan  3 місяці тому

      The Lucky65 has been build quality, but they both sound pretty good

    • @apeman157
      @apeman157 3 місяці тому

      @@itssamueltan so which would you recommend more? I'm fine with either 65 or 75

    • @itssamueltan
      @itssamueltan  3 місяці тому

      @@apeman157 I would say the Lucky65 if you don't need a knob

  • @erictaboga485
    @erictaboga485 6 місяців тому +1

    Great video, I just wanted to ask if the keyboard supports screw-in stabilizers, or do you think they're not necessary? Thanks!

    • @itssamueltan
      @itssamueltan  6 місяців тому

      Hey thanks! The PCB doesn't support screw in stabs. But I think the included plate mounted ones get the job done

  • @_kailyn197
    @_kailyn197 8 місяців тому +2

    Im contemplating between getting this board and the monsgeek m7w. Which do you reccomend?

    • @itssamueltan
      @itssamueltan  8 місяців тому +1

      For me, I think the M7W feels more solid. But the Lucky 65 sounds way better.

    • @StierZerk
      @StierZerk 8 місяців тому +2

      hi. i owned a M7W purple. And surprisingly, it is good. But, the stock stabs for the M7W is really scratchy so you need retuned and relubed. Maybe do some holee mode also. I havent tried the lucky65 i wouldnt know in term of sound signature compared with this board. maybe as sam suggest, if you looking for sound preference, maybe this one is to go.

  • @sushiman56
    @sushiman56 7 місяців тому +2

    I'm thinking to get either this board or the LEOBOG Hi8. Which one do you think sounds better?

    • @itssamueltan
      @itssamueltan  7 місяців тому +1

      Hmm I they both sound great tbh. But the Lucky65 has better build quality.

  • @SoulBlade0
    @SoulBlade0 7 місяців тому +2

    Hello! Is it possible to put a white backlight on the keyboard? And the backlight is set through the software?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Hi, yes you should be able to just get it to white. You do it by adjusting the Lightning with the Fn key or with the software

  • @andremuller6964
    @andremuller6964 8 місяців тому +5

    How's the quality of the aluminium case, is it rough or more refined and smooth ?

    • @itssamueltan
      @itssamueltan  7 місяців тому +4

      It's refined and smooth with the Anodized coating. Only the weight is slightly rougher/not as smooth of a finish. But I think that is because mine is a pre production sample

  • @korezako3930
    @korezako3930 5 місяців тому +1

    Nice vid as always. I want to ask if i go to KL, where is the best place to look around mechanical keyboard? Also hoping you will review GMK61 because it's the one i'm interested to buy now. got bored with 65% lol.

    • @itssamueltan
      @itssamueltan  5 місяців тому +1

      Hey, on KL there's a few. You have Mecha MY and MKB.MY and even KeebsProject

    • @korezako3930
      @korezako3930 5 місяців тому

      @@itssamueltan Thank you so much for answering!

  • @matheaumichalak7537
    @matheaumichalak7537 6 місяців тому +1

    My spacebar is hanging up and does not return to the resting position. Open to suggestions. I've already attempted to reverse the spacebar and I've installed different switches. Should I be look to trim the stabilizer mounts, or inspect and re-lube? What's strange is the spacebar works perfectly fine when I flip the keyboard upside down and the typing surface faces the desktop surface.

    • @itssamueltan
      @itssamueltan  6 місяців тому

      Hey I think the lube on the Spacebar stabilisers is too much, you can try cleaning the lube from the stabs and try again

    • @iDislikeEditThanksForTheLikes
      @iDislikeEditThanksForTheLikes 6 місяців тому

      its getting stuck on something. might be the poron foam under the plate is dislodged and hitting the stab wire? or did you mod your stabs with holee and the bandaid piece got dislodged? or maybe the stab wire is bent in a weird angle and caused it to get stuck?

  • @jimmyhopkins1
    @jimmyhopkins1 6 місяців тому +1

    Hiya what screwhead did you use to take the keyboard apart thanks .

    • @itssamueltan
      @itssamueltan  6 місяців тому

      It was an Allen key, i don't remember the size tho 🥲

  • @Rei-wc1mb
    @Rei-wc1mb 2 місяці тому +1

    Hi, does the version 2 of this keyboard supports a stepped capslock?

    • @itssamueltan
      @itssamueltan  2 місяці тому

      Yes

    • @Rei-wc1mb
      @Rei-wc1mb 2 місяці тому

      @@itssamueltan how?

    • @Rei-wc1mb
      @Rei-wc1mb 2 місяці тому

      @@itssamueltan i cant move my switches onto the leftside of the socket

    • @itssamueltan
      @itssamueltan  2 місяці тому

      @@Rei-wc1mb try changing the orientation

  • @alin543
    @alin543 7 місяців тому +3

    great review! i have the sugar65, do you think i should get this as well? i am thinking of getting it but if it sounds and feels 90% similar to the sugar65 then maybe i'll consider other options

    • @itssamueltan
      @itssamueltan  7 місяців тому +1

      Hmm I think they sound similar? But not the same

  • @Xander_t
    @Xander_t 7 місяців тому +1

    just got my lucky65, but i cant help but feel the sk71 is still better. The only board that goes blow for blow with it has got to be the rainy 75

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Hmm maybe the SK71 feels more refined? But I think the Rainy75 is above the SK71 tho

    • @Xander_t
      @Xander_t 7 місяців тому

      @@itssamueltan yea for sure, i guess what i was trying to say is if anyone is looking for a budget board the sk71 is the way to go. The rainy 75 isnt $90 anymore either. Once they realized what they had they raised the price. The standard version i think is like $125 before shipping and tax.

  • @kienvu3624
    @kienvu3624 7 місяців тому +1

    HI Tan! I just connect this kit to PC, open software but no devices. Can you please give any advices ? thanks

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Is it connected through the wire?

    • @kienvu3624
      @kienvu3624 7 місяців тому

      @@itssamueltan yes I did. The keyboard connected and use normally,. But when open software, no device :(

    • @kienvu3624
      @kienvu3624 7 місяців тому +3

      Finally fixed by pressing Fn + Tab to switch to wire mode 😁

  • @yato7786
    @yato7786 2 місяці тому +1

    can you help me out the software can't detect my keyboard

    • @itssamueltan
      @itssamueltan  2 місяці тому +1

      Is it connected via cable? Or wired?

    • @yato7786
      @yato7786 2 місяці тому

      @@itssamueltan it's wired

    • @yato7786
      @yato7786 2 місяці тому

      @@itssamueltan I really waaant the number keys to be juust function keeys

    • @itssamueltan
      @itssamueltan  2 місяці тому +1

      @@yato7786 hmm where did you get your keyboard?

    • @yato7786
      @yato7786 2 місяці тому

      @@itssamueltan wait I'll send the link it's from shoppeee

  • @SwiftyProdz1
    @SwiftyProdz1 8 місяців тому +1

    Do you think this or the sugar65 is better?

    • @itssamueltan
      @itssamueltan  8 місяців тому +1

      Well honestly, they are both from Weikav and are very similar. I would say just go with what you like in your budget.

    • @SwiftyProdz1
      @SwiftyProdz1 8 місяців тому +1

      @@itssamueltan k thanks

    • @itssamueltan
      @itssamueltan  8 місяців тому

      @@SwiftyProdz1 welcome!

  • @EChere
    @EChere 6 місяців тому +1

    Have you tested the 2.4ghz mode on lucky65 it doesn’t seem to work for me

    • @itssamueltan
      @itssamueltan  6 місяців тому +1

      Have u paired it with the dongle?

    • @EChere
      @EChere 6 місяців тому

      @@itssamueltan Yeah I did, I also followed the manual by pressing fn + r to pair it but it only blinks in white.

    • @itssamueltan
      @itssamueltan  6 місяців тому +1

      @@EChere try holding it for a few seconds

    • @EChere
      @EChere 6 місяців тому

      @@itssamueltan still doesn’t work, it recognized as a lucky65 dongle but it doesn’t pair to it I do see some post with the same problems so I came to ask you about it

    • @itssamueltan
      @itssamueltan  6 місяців тому

      @@EChere u might need to download the software, and try formatting the keyboard

  • @_seoldam
    @_seoldam 6 місяців тому +1

    I have a problem where the spacebar scratches on the case itself. :v

    • @itssamueltan
      @itssamueltan  6 місяців тому

      Maybe the alignment of the PCB and Plate is off? You can try opening the keyboard and repositioning it

    • @_seoldam
      @_seoldam 6 місяців тому

      @@itssamueltan I already did. Idk how to fix this one.

    • @_seoldam
      @_seoldam 6 місяців тому

      @@itssamueltan if the alignment of pcb is off, how did the switch is properly inserted?

    • @itssamueltan
      @itssamueltan  6 місяців тому

      @@_seoldam maybe the gaskets are not in the proper mounts? Or you can try contacting them to get a new unit if the issue can't be fixed

    • @_seoldam
      @_seoldam 6 місяців тому

      @@itssamueltan Hi, what do u mean by not in the proper mounts?

  • @dariushyarmahmoodi2406
    @dariushyarmahmoodi2406 7 місяців тому +1

    How is this compared to the womier sk 71?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      This feels better quality and sounds poppier to me

  • @Oveey
    @Oveey 5 місяців тому +1

    is it better than the hi75?

    • @itssamueltan
      @itssamueltan  5 місяців тому

      Materials and quality wise, yeah

    • @Oveey
      @Oveey 5 місяців тому

      @@itssamueltan my hi75 sounds very bad I don’t know why but I also have a qk65 v2

  • @Kinshiiki
    @Kinshiiki 7 місяців тому +1

    Is this good for gaming ?

    • @itssamueltan
      @itssamueltan  7 місяців тому +1

      Well yea

    • @ZeroChoices
      @ZeroChoices 7 місяців тому +1

      aula f75 is a plastic board that is good for gaming considering its latency
      the leobog hi75 also has good latency too, but the aluminum finish wont be as good as this

  • @maxchopin409
    @maxchopin409 7 місяців тому

    Dude I've got a problem. It came today and I installed their software but I can't can't change the mapping of certain keys. Most of the keys don't want to be changed in their app while others do. I can't change FN to be alt or alt to be FN but also I can't change most of normal keys. Any suggestions?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Hmm I'm not sure on this tbh, mine works fine by just remapping it in the software. Maybe you can try emailing/contacting their customer support?

    • @maxchopin409
      @maxchopin409 7 місяців тому

      @@itssamueltan yeah just did. So you remapped every key easily however you wanted?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      @@maxchopin409 I haven't tried every key, just the keys on right like the Delete and Pgup

    • @maxchopin409
      @maxchopin409 7 місяців тому

      @@itssamueltan nah I got fucked up unit. It doesn't even want to pair with 2.4gHz dongle. Shits blinking R all the time but doesn't pair

    • @itssamueltan
      @itssamueltan  7 місяців тому

      @@maxchopin409 dang, I think you might really have a defective unit

  • @harudt
    @harudt 7 місяців тому +1

    Does it support knob?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      Yes, but you will need to solder it on the PCB

  • @nikosp8401
    @nikosp8401 5 місяців тому +1

    Nice review, did you encounter any problem with the keyboard? Especially with the 2.4ghz and bluetooth functionality? Some people on reddit report that the wireless is pretty bad in this keyboard.
    Also, how is the keyboard compared to GMK67? (if you ever use GMK67)

    • @itssamueltan
      @itssamueltan  5 місяців тому

      The wireless functionality is okay, it just has to be closer to the dongle from my experience. As for the GMK67, I've done a video on it too, it's a great budget keyboard, but if you compare the two, I would prefer the Lucky65 because of the metal case.

  • @DiaMondx2
    @DiaMondx2 4 місяці тому +1

    nice video i might get this keyboard

  • @Vkopskiz
    @Vkopskiz 7 місяців тому +1

    Name of keycaps, please?

    • @itssamueltan
      @itssamueltan  7 місяців тому

      It's in the description and the video, Domikey WOB Obsidian

    • @Vkopskiz
      @Vkopskiz 7 місяців тому

      @@itssamueltan tks u very much!

  • @ucphu7848
    @ucphu7848 7 місяців тому +1

    How can i using this ~ key ? Please help me

    • @itssamueltan
      @itssamueltan  7 місяців тому

      You set it in the software or u can use Fn to activate it

    • @ucphu7848
      @ucphu7848 7 місяців тому

      @@itssamueltan With fn+esc = ~ but i can't not find for this ` character, can u help me

    • @eytfiftin
      @eytfiftin 7 місяців тому

      @@ucphu7848 Fn + Esc for me is ` while Fn + Shift + Esc is ~

    • @carzy1.0
      @carzy1.0 7 місяців тому

      ​@@ucphu7848try FN+shift+ key

  • @maxchopin409
    @maxchopin409 8 місяців тому +1

    Making such iconic mark and not giving the green color is a scam

    • @itssamueltan
      @itssamueltan  8 місяців тому

      Ikr! I initially wanted to ask for a green version but there isn't any available 🥲

    • @silentKeys20
      @silentKeys20 8 місяців тому +2

      And the box is GREEN too 😭

    • @itssamueltan
      @itssamueltan  8 місяців тому

      @@silentKeys20 just teasing us 🥲

  • @klutzkeebs
    @klutzkeebs 5 місяців тому +1

    anybody else have problem with the software?
    ]

    • @itssamueltan
      @itssamueltan  5 місяців тому

      Make sure it's connected with the wire

  • @Woahh-4k
    @Woahh-4k 6 місяців тому +1

    that space bar triggers me

    • @itssamueltan
      @itssamueltan  6 місяців тому

      It works tho I like it

    • @Woahh-4k
      @Woahh-4k 5 місяців тому

      @@itssamueltan lol do u what you want but does the position of that space bar affect how hard you need to press?

    • @itssamueltan
      @itssamueltan  5 місяців тому

      @@Woahh-4k it's just more ergonomic when gaming, the angle is better on the thumb

  • @LostinMIA
    @LostinMIA 8 місяців тому +7

    This board came out at about $30 6 months ago and now we're up to $80. Soon we will pass $100!

    • @ДеллиРассол
      @ДеллиРассол 8 місяців тому

      The Sugar65 you can get for 30

    • @itssamueltan
      @itssamueltan  8 місяців тому +1

      Well tbh, you can still get it around $30 from the OEM. Just like the Sugar65, you can find the OEM on Taobao

    • @itssamueltan
      @itssamueltan  8 місяців тому

      @@ДеллиРассол yea same by Weikav too

    • @LostinMIA
      @LostinMIA 8 місяців тому

      @@itssamueltan I just registered with Taobao and no..... this is what it says "WEIKRV SUGAR65 Mechanical Keyboard Kit Wired Gasket CNC FR4
      ¥684.1rise
      Starting from about USD 95.16"
      They didn't even spell the name Weikav correctly. There are no boards in that price range or even close for the USA. There pricing is actually higher then Aliexpress direct.

    • @edwinlim6652
      @edwinlim6652 8 місяців тому +2

      @@itssamueltan do you know where i can buy it for $30 on taobao? cant seem to find it

  • @thanhofficial4832
    @thanhofficial4832 6 місяців тому +1

    Nice for Rog Keris