you all prolly dont care at all but does any of you know a method to get back into an Instagram account..? I was dumb forgot my password. I would love any assistance you can give me
@Delta Striper Slayer -- I went to 529 on my rock crawler it has 37 inch tires. It brought my power and torque probably right back down to stock performance, as well as the gas mileage
Jimmy Jet! Question, would you recommend a future gear ratio change on a 2015 4RUNNER SR5? As you know the stock ones lack power in the torque department and soon I’ll be putting 35’s on to start some “overlanding”. Your thoughts :) Ps MP sick Taco! Subscribing right now!
I have a 94 Land Cruiser and am looking at regearing. You mentioned that your Tacoma was searching for gears and downshifting a lot, my LC does the same thing with the 35's I am running (BFG). A lot of the people on I8Mud say that with 35's that 4.88 are best for the LC. But after talking to a local guy that does a lot of gear installs I have decided to go 5.29 and lockers on my LC. Watching your video just reaffirms my decision.
Hey Maxx, just wanted to thank you for putting out all of the great content over the years. After watching videos of yours, like this one inspired me to do upgrades to my 2016 Tacoma as well. This past weekend we made the trip over the pass( We live just West of Olympia) to have Just Differentials install some 5.29's in my truck. Couldn't be any happier or excited about the experience from those guys and how it turned out, the difference driving back over the pass was huge driving in 3rd and 4th gear on the way over the pass, to driving in 5th and 6th gear(I have the Manual) driving back over was so much more relaxing and less stressful feeling goes through you. SO thanks again and keep the videos rolling.
That was real. I remember when I got 5:29's. Same. Best part is they pay for themselves in gas. Im a lil bummed I can't go over 85 but for sure thats a good thing. Hope to see you out there one day. Cheers...
Nothing better than when you do something to your rig (and pay a bunch of $$ ) and it actually works and you can actually feel the difference. Happy for you.
Goals!!!!!!!!! Got a 17 TRD ORLB, Definitely modified my truck based off of yours. Bumpers are in the works, but this re-gearing seems like the next way to go. Awesome job Max👍🏼
I run 5.29 in my 100 series with 315s and LOVE them. Could not be happier. MPG went up. 14.7 from Tyler Texas to Colorado Springs. 75mph-85mph the whole way Holds OD gear uphill with no drama. With the 3.1:1 transfer case gears, I can take my feet off the gas and brake on steep descents and just crawl down the trail.
Hey Maxx, i find this video an eye opener and helpful. I was leaning towards the 4.88s for some time now and when i watched your video, it gave me a new perspective. I definitely do prefer the low end power as my current setup on my taco is getting heavier with all the mods i have done so far. i have a TRD-OFF ROAD manual transmission with 35s and some accessories on and i'm always shifting gears and definitely lacks the get-up and go that i miss when i first drove it off the lot. The 5.29 will definitely be my next major upgrade. Great video!! Keep them coming...
When changing axle gears ratios in a 4X4, the front and rear axle ratios must be the same ratio when operating in four-wheel drive. If the front and rear axles are different ratios, severe damage to the transfer case and other truck components will occur
Very good video, I took mine in this morning to get 5.29's, running 33's, but do haul a 14' trailer and UTV, plus back loaded, poor truck is screaming it's brains out. Can't wait to get it back.
I love my 5.29 gears in my 93 4 runner. But the shop that rebuilt my rear end was trying to talk me out of the 5.29 because the pinion gear has less area to contact the ring gear. They were pushing hard for the 4.88 gears. But with my lil 3.0 and 35 inch tires it works out perfect. It put it back to stock feeling power and my Speedo is right on with my 35's. The shop then showed me a 5.29 pinion gear that was sheared off. But way more power I het from,the 5.29. I put a 4.30 in just to try it out and can't even think about using 5 th gear. But breaking in the gears sucks. I just put an Eaton E locker in and new bearings and seals in the rear end. Still in break in mode. I live in Bellingham Wa so I might see you on the trails sometime.
This is a great Video! I have a 2017 stock. I feel even the stock struggling often. I use the ECT Power more than I should just because it feels so much better. I'd like to make this change in the future to the 5.29. Thanks Max! Good Info.
@@gordis951 315 /75-r16 Mickey Thompson MTZ's on 16X9 PC Alloys. 4.0 with a 5 speed manual transmission. G2 D44's front and rear with 30 spline chromoly axles, 4.88's and Detroit Truetracs.
Best way to explain a re-gear like you had done in your truck is if anyone has ever riden a mountain bike before. When you switch the gears as you pedal the bike and you can feel the difference in how hard you have to work. In a low gear yes your legs are moving faster but they are hardly trying inorder to get you to move. To high of a gear and your not doing to many rpm's, but you are having to push a lot harder then you normally would. That's just a good way to explain the difference if you have never experienced it in a vehicle before. It was for me anyway. K have a good day everyone!!
No need for a tune anymore! I just got the update (T-SB-0062-18) and it feels like a completely different truck! No hunting for gears or stumbling at takeoff. I HIGHLY recommend swing by the dealership for the free update. Only took about an hour.
Awsome views with the camera, awsome information thanks to you guys I learned something today😁 right on! Always a good fan of yours. Keep these awsome videos coming man your doing a great job
Me too... still debating. I was thinking that it really depends what you do to the truck. I heard 33s or less for tires you stick with 488. Anything more than that or extra weight and tow, you go 529. I keep hearing different things though. It’s like there is no really correct answer.
@@vietta3771 I know eh, I’ve heard the 5.29 won’t be too much and I’m scared of doing 4.88 and not being enough for the hills and towing but in scary 5.29 will be too much for 80% city driving
@@Rickwynne I’m in the same boat. I’m running 33s now. 285/75/16… No lift. Probably won’t. It gear hunts all over Dallas Fort Worth. When it’s windy… it’s worse! 15-16 average mpg and with the way gas prices are, it’s getting about the same as my buddies stock raptor …
@@vietta3771 I feel like I’m gonna go 5.29 cause I don’t need to be doing 130+ km/h on highways always. And will be nice for towing and all the hills. Fuel Mileage improved would be nice too, gas is outrageous
Fuel efficiency of the engine is different at different rpms and also at different throttle positions, so its crazy complicated to know the best rpm to run as driving conditions are very dynamic. Fuel efficiency is also affected by how the engine ecu is programmed. It isn’t always for maximum fuel economy due to power and emissions requirements. Gear ratio steps in the Tacoma 6spd auto are kind of strange and only Toyota could explain why they chose them as they don’t have even spread like a typical auto or manual. In addition, it seems that to protect the transmission, they program it to shift out of overdrive at a relatively low throttle position when requiring higher power delivery, especially at lower rpms where heat from loading/lugging it could affect its life. So regearing to get higher rpms allows the Tacoma to hold the gear longer as you will have more power available due to the higher rpms, but also, the programming of the shifting based on throttle position is allowing the transmission to hold the overdrive gears longer as the higher rpms mean less lugging. Generally lower rpms are more fuel efficient but only if you have enough power in the engine at those rpms and you are not being detrimental to other things, like heat and stress and emissions etc. If you run, more weight, more wind and rolling resistance, bigger tires etc, you need to over-correct the engine rpm to get more power and better throttle position which will effectively and generally give you better fuel economy than stock gearing for the same exact driving conditions.
I follow TW pretty much every day, and didn't see anything about 5.29's even being available at this time. 4.88 were the only option for 3rd gen Tacos as far as I could tell. I must have missed the chatter if there ever was any of the Nitro 5:29's availability. It's truly a liberating feeling once you change gears, huh? Back in the 90's, I had an F150 with the 5.0, and something like 27" tires. I jacked that truck to the moon with a 3" body lift + 6" suspension lift, and 36" Swampers. Ran it this way for a few months and then regeared from 3:55 to 4:56 and that truck came back to life with extra ummph to boot!
Thanks Marcus. I looks like it was just this summer that the 5.29 thread got started. It never popped up in my view when I clicked on "New Posts". So far it looks like just a handful of folks have been swapped to 5.29, but all are AT guys. Looking forward to hearing how it feels with the MT (like I have).
Thanks for the info. Video was good to watch. Not a bunch of jabber that wasn't related to the subject like some do. Keep it up. I'm from Lake Steven's so the area is very familiar.
I just bought a 2019 TRD Off Road, and this is the first vid (and subsequent comment section) that I actually felt like engaging. You being from the Northwest made it even better. It's been tough finding a place online to discuss these things in a civil manner without the pretentious douche bags coming out of the woodwork screaming "mall crawler!" if I don't install a certain type of tire haha. I have no idea what direction I'm going to take my mods in, but this is something I'm definitely going to be looking into at some point. Even on my test drive, I can already tell that as much as I loved the truck, some of the "searching for gears" statements in this vid certainly felt validated. With all the "research" Ive done thus far, I know some changes will need to be made if I'm going to get the full potential out of my truck. I appreciate the vid. It was entertaining and informative. Subbed.
@@Maxx.Powell Thanks! That's good to know. The truck is still in transit from the factory, so I'll definitely make sure to bring that up when it arrives.
Running 33's , Nitro 4.56 Gears, and Magnuson Supercharger, 2010 FJ, I am really enjoying the setup, Pulling a heavy Overland Teardrop, barely downshifts even going through the mountain passes. Very please with result.
Where are you on the job? I’m a LT in Portland Maine. 22 years on the job. I drive a ‘17 Tacoma with. 2” OME lift, front winch bumper and Warn winch. I haven’t noticed any drag yet, but I have 33’s. Might have to look into the 5.29.
All I hear from UA-camrs is Tacoma transmission searching for gears, I have a 2020 tacoma TRD. Just drove from Washington state to Moab Utah and back. Truck fully loaded and a rooftop tent approximately 750 pounds total. About 1150 with myself and family in the truck. I have rock sliders diamondback bed cover, and load bars. My truck was never searching for gears, never upshift and downshift in sporadically or any of that. It held strong over all the massive long uphill grades. The vast majority of the time the truck stayed in one gear and pulled over the mountains with no problem at all. So I just don’t know what people are talking about when it comes to the Tacoma transmission. I’ve had no issues or complaints so far, no upshifting and downshifting searching, hunting for gears. Simply have not experienced that at all.
@@Maxx.Powell thanks for mentioning that. I thought I was going crazy, like, am I the only tacoma owner who is not experiencing this? I think people might use "3rd Gen Tacomas a little to generically when discussing issues. I'm glad the re-gear worked out for you, seems like a huge difference. thanks for the reply, have a great day, and keep up the good work!
Max, first and foremost, your channel is awesome! It's given me tons of ideas for my taco as well. But I just finished watching your video that's on the cbi channel and as a fellow fireman down here in texas, I gotta ask. Where'd you get that notre dame fd shirt?! That thing is sick!
Thanks brother 😁. Although I'm not planning on putting armor or adding much weight to my truck, I'm sure I'll still benefit a lot from those 5.29 gears once they're installed 😎. Stoked that yours is running a whole lot better now 💪
Great video. Lots of misconceptions about gas mileage versus RPM. Every engine has a different power/torque vs rpm curve. When you map power/torque over a fuel consumption vs rpm you can see power efficiency over RPM. To get good fuel mileage you want to keep the engine in the RPM range that has the greatest power/torque efficiency. You derive the desired RPM from power/torque/fuel-consumption, not the other way around.
For daily driving 529 gears with 35 inch tires, is way over the top. If you wanted to increase your crawl ratio when going Offroad, you could have put in one of those dual transfer case mods. With both transfer case is in Lo you would have a crawl ratio around 200, but the truck would be way more drivable in hi, and 2 wheel drive.
@@Maxx.Powell that's surprising. I would think you would have some issues maintaining higher highway speeds without going into high RPMs. Especially if you drive a manual with its higher 6th speed gear ratio. In any case I'm glad it worked out for you. I'm on 33s, so I definitely won't go above 4.88. Maybe get a dual transfer case way down the road.
mo hawk The 6spd auto in the 3rd Gen Tacoma has a very high 5th and 6th gear. .69 and .58. With a stock unloaded truck this works well to keep low rpm’s as you do not require much power. With a modified truck, ie. heavier, more wind resistance, bigger tires and more rolling resistance, you need considerably more power. This means you need to run higher rpm to get that. It is just physics. Regearing to keep the same rpm as stock rig would not benefit the drivability or fuel economy. The transmission would just have to downshift to lower gears to get higher rpm’s and higher required power effectively losing a gear or two. There is a balance point and each vehicle and driving situation will differ. In the end more power costs more fuel, but getting to use all 6 gears allows the truck to always drive at the lowest rpm for the conditions and saves fuel compared to only having the use of 4 or 5 gears due to the wrong axle ratio for the conditions.
@@gregsheridan not considering the additional weight, and just going off tire size, and the drivetrain gearing ratios, to get back to stock RPMs with 35 inch tires, you would need a 4.56 differential gear. With 4.88 and 35, you would have some additional torque to handle the extra weight, but still stay relatively close to the stock RPMs. The problem is that people choose their gear ratios with a mistaken belief that it will give them more "power". Which it does not. All a regear does is determine how efficiently the crank shaft torque is translated to the torque at you tire. If you're regearing to get more power, you're doing the wrong mod, you need an engine mod for that. Of course you can go with an arbitrary large differential gear, but the cost of this is constantly running your engine at many hundreds RPM above what it was designed for. I can't see how this doesn't affect engine life, and to some extent drivability.
My 2021 tacoma sits on 33x 12.5. It don't hunt for gears and it runs great......no issues at all , alittle bump stear due to tire width. That's about it.
I just purchased the 5.29 Nitro gears and the master install kit... $900. I'm doing the install because most reputable shops want $750 per diff... So $1500 for labor.
I ran 4:88 on my first gen 2.7 with a manual transmission.....loved it with 35's a TJM from bumper and a custom rear with swing arm....it was def a huge improvement over the stock gears
Chip Schoff it would hold 70-80 on the interstate, but I never really drove it that much faster than that....I think if you Google i8aheep it'll show you some old photos of it maroon std cab with a swing out tire on the tailgate
I went from 2.73 gears to 4.10 gears in my mustang and it pulls hard af out of the hole. The best bang for your buck is gears hands down. My gas mileage stayed them same and sometimes worse but I’m on the throttle a lot more now. Top end didn’t kill me either.. I still went 152mph with 4.10 gears thanks to the 6 speed
@@FerRod2113 well mine do that too but it no fun when your spinning and not actually catching also if you have that high of gears and if you ever add boost you rev to damn fast to use it lol
I traded in my 2017 TRD 4x4 that I had for 10months because of the gearing. It wouldn't tow my boat with our hunting for gears not a huge boat either. Got a Tundra...no issues now. I didn't regear it because I didn't want to void the warranty
yes, more than like true. I figure I was only pulling 3000lbs or so that Atkinson function going from a 6 cy to 4 cy mode was super annoying and using the manual mode made my rpms super high.
Regearing will help power and mpg. Its something I should have done on my Jeep. I will do it for sure on the new Jeep when I do the tire upgrade. By the way, I saw your trailer parked at one of the Sand Flats Campgrounds the other day. I think it was Tuesday. I kept looking for your truck but never saw it.
Maxx Powell Yep, we ran fins n things. We always have to do it when in town. Its always fun.. I’m sorry too that i didnt get to meet you. I did run into a guy on Poison Spider Mesa that knew a guy that I know in Atlanta.. keep the video’s coming as I like watching your mods and adventures.
I know this is an old video but next time I would suggest buying a Manual truck. I have 4.56 on my with 305’(34.54’) and zero issues going 100+ and wheel in’ like a beast.
@Maxx Powell, Awesome video thanks for showing us your experience. I have a question though, where are your RPM's when doing 70mph? or 75mph? Thanks in advance.
Enjoyed the video. 2 months ago I got a 2018 Tacoma 4x4. I’m interested in doing the same thing. Where would I purchase the gears and when I take it to a shop about how much would a job like this cost. For me the searching for a gear thing is annoying. Any information you can pass on would be appreciated. Thanks
Maxx, thanks for the post. I have been frustrated with the sluggish response from the engine/transmission (6-spd auto) marriage in my 3rd Gen Taco. This is my third Taco in 10 years and certainly the most disappointing. I am wondering if you have documented your RPMs at highway speeds for 4th, 5th and 6th gears with the new 5.29s? I have a 2017 Taco Off Road and am curious to know the RPMs in each of the three highest gears at 60, 70 & 80 MPH. I do a lot of highway driving for work and find myself camping in 4th gear at 77-78 (in 70 MPH speed zones) around 3300 RPMs so that my truck doesn't continuously hunt for gears with terrain changes while also giving me some ability to get around folks sleeping in the fast lane. I have been looking for a solution for nearly a year and a half now and am wondering if 5.29s would be the right direction.
That was the perfect time to do ARB or Harrop lockers. Did Just Differentials recommend using a thicker weight gear oil? I would recommend using synthetic even for the break-in.
what if I have a manual transmission and plan to install 35 tires - should I go for the 4.88s or 5.29 will appreciate a response. This is a great video, thank yo.
That truck ride with the guy from nitro was very interesting to watch. Thanks for posting.
Agree
Jared is a great guy.
you all prolly dont care at all but does any of you know a method to get back into an Instagram account..?
I was dumb forgot my password. I would love any assistance you can give me
@Koda Harlan instablaster =)
When I went to 5.29 in my rock crawler it was a huge difference. Such a great difference. Glad you did this instead of getting another truck.
@Delta Striper Slayer -- I went to 529 on my rock crawler it has 37 inch tires. It brought my power and torque probably right back down to stock performance, as well as the gas mileage
Aftermarket axle set up since it's a rock crawler?
Jimmy Jet! Question, would you recommend a future gear ratio change on a 2015 4RUNNER SR5? As you know the stock ones lack power in the torque department and soon I’ll be putting 35’s on to start some “overlanding”. Your thoughts :)
Ps MP sick Taco! Subscribing right now!
lol dumb toyyoda guy. l
@@patrickgronemeyer3375
so, what do you drive?
8:29 you know he's a true gearhead. That smile says it all
I have a 94 Land Cruiser and am looking at regearing. You mentioned that your Tacoma was searching for gears and downshifting a lot, my LC does the same thing with the 35's I am running (BFG). A lot of the people on I8Mud say that with 35's that 4.88 are best for the LC. But after talking to a local guy that does a lot of gear installs I have decided to go 5.29 and lockers on my LC. Watching your video just reaffirms my decision.
Thanks stopping by the shop
jackelracer593 where is the shop located?
Pablo Reynoso cashmere WA
That mechanic is top shelf. I’ve seen him in other videos and he is amazing. I would love to have him re gear my truck.
Seems like a great group of guys. I like to see folks that take pride in their work.
Hey Maxx, just wanted to thank you for putting out all of the great content over the years. After watching videos of yours, like this one inspired me to do upgrades to my 2016 Tacoma as well. This past weekend we made the trip over the pass( We live just West of Olympia) to have Just Differentials install some 5.29's in my truck. Couldn't be any happier or excited about the experience from those guys and how it turned out, the difference driving back over the pass was huge driving in 3rd and 4th gear on the way over the pass, to driving in 5th and 6th gear(I have the Manual) driving back over was so much more relaxing and less stressful feeling goes through you. SO thanks again and keep the videos rolling.
Really glad to hear you enjoy the content man! Thanks for watching!
That was real. I remember when I got 5:29's. Same. Best part is they pay for themselves in gas. Im a lil bummed I can't go over 85 but for sure thats a good thing. Hope to see you out there one day. Cheers...
Can’t go over 85? What do you mean?
awesome video Max. I've been thinking about re-gearing my truck to the 4.88 but i think ill be doing the 5.29 now. keep up the awesome videos man!
Just did mine 👌 love it
Nothing better than when you do something to your rig (and pay a bunch of $$ ) and it actually works and you can actually feel the difference. Happy for you.
Great video. Just got my '15 Tacoma and am falling deeper and deeper into the community. This video was entertaining and helpful. Thank you.
Goals!!!!!!!!! Got a 17 TRD ORLB, Definitely modified my truck based off of yours. Bumpers are in the works, but this re-gearing seems like the next way to go. Awesome job Max👍🏼
Editing is getting so damn good man. Keep them coming!
I run 5.29 in my 100 series with 315s and LOVE them.
Could not be happier. MPG went up. 14.7 from Tyler Texas to Colorado Springs. 75mph-85mph the whole way
Holds OD gear uphill with no drama.
With the 3.1:1 transfer case gears, I can take my feet off the gas and brake on steep descents and just crawl down the trail.
Does it effect the overall speed on highways?
Your video content keeps on getting better and better bro! You seriously deserve more subs. Much love from Hawaii 🤙🏽
Hey Maxx, i find this video an eye opener and helpful. I was leaning towards the 4.88s for some time now and when i watched your video, it gave me a new perspective. I definitely do prefer the low end power as my current setup on my taco is getting heavier with all the mods i have done so far. i have a TRD-OFF ROAD manual transmission with 35s and some accessories on and i'm always shifting gears and definitely lacks the get-up and go that i miss when i first drove it off the lot. The 5.29 will definitely be my next major upgrade. Great video!! Keep them coming...
Man the mechanic on the test drive is passionate about what he does.
Toyota just needs to put the small v8 in this truck bottom line🙏
That would be awesome
why don't you do it. only cost about 10K for a 400HP motor
Yes v8 taco and diesel tundra.
Agreed the V6 are shit, it doesn’t have to be a race truck but a huge displacement V6 is doing the truck no favors
@@thenavigator5889 10k you drunk?
omg bro i loved american pie. its so awesome you got huge doing these awesome car reviews. much success
Great video once again, I’m probably watching them all out of order, but I’m watching!
Greetings from Australia. Love watching your family grow and the journey with the truck, keep up the good work!
Awesome man! I go that route all the time!!! Super good to see.
When changing axle gears ratios in a 4X4, the front and rear axle ratios must be the same ratio when operating in four-wheel drive. If the front and rear axles are different ratios, severe damage to the transfer case and other truck components will occur
no kidding. good message
Oleksii Silin Im sure they know it
Awesome improvement!! I am getting my 3rd gen 4runner regeared. Super pumped now!!
GREAT info. Helped me decide to regear before adding bigger tires and other gear.
Very good video, I took mine in this morning to get 5.29's, running 33's, but do haul a 14' trailer and UTV, plus back loaded, poor truck is screaming it's brains out. Can't wait to get it back.
@@Maxx.Powell Thanks !
I love my 5.29 gears in my 93 4 runner. But the shop that rebuilt my rear end was trying to talk me out of the 5.29 because the pinion gear has less area to contact the ring gear. They were pushing hard for the 4.88 gears. But with my lil 3.0 and 35 inch tires it works out perfect. It put it back to stock feeling power and my Speedo is right on with my 35's. The shop then showed me a 5.29 pinion gear that was sheared off. But way more power I het from,the 5.29. I put a 4.30 in just to try it out and can't even think about using 5 th gear. But breaking in the gears sucks. I just put an Eaton E locker in and new bearings and seals in the rear end. Still in break in mode. I live in Bellingham Wa so I might see you on the trails sometime.
This is a great Video! I have a 2017 stock. I feel even the stock struggling often. I use the ECT Power more than I should just because it feels so much better. I'd like to make this change in the future to the 5.29. Thanks Max! Good Info.
Blue14 I do the same thing. Going to upgrade to 33s and hoping just using ect all the time will be sufficient and I think it will
This video is the exact reason I went from stock 3.07's to 4.88's on my Jeep. Congrats on getting your performance back!
Scott
What engine/transmission and tire size are you running? I'm still stock on my LJ with 33"
@@gordis951 315 /75-r16 Mickey Thompson MTZ's on 16X9 PC Alloys. 4.0 with a 5 speed manual transmission. G2 D44's front and rear with 30 spline chromoly axles, 4.88's and Detroit Truetracs.
Best way to explain a re-gear like you had done in your truck is if anyone has ever riden a mountain bike before. When you switch the gears as you pedal the bike and you can feel the difference in how hard you have to work. In a low gear yes your legs are moving faster but they are hardly trying inorder to get you to move. To high of a gear and your not doing to many rpm's, but you are having to push a lot harder then you normally would. That's just a good way to explain the difference if you have never experienced it in a vehicle before. It was for me anyway. K have a good day everyone!!
This guy is living the life!
That is literally one of the best things about Toyota, the diff is so easy to work on.
Drop out third members are great
No need for a tune anymore! I just got the update (T-SB-0062-18) and it feels like a completely different truck! No hunting for gears or stumbling at takeoff. I HIGHLY recommend swing by the dealership for the free update. Only took about an hour.
Really? Is this a warranty option ?
Is this a update all Toyota dealership would offer for a 17 Tacoma?
Austin Bailey I did the same update. Does feel much better
Just wondering how much did it cost you?.. I need to save up. 😉😉
Awsome views with the camera, awsome information thanks to you guys I learned something today😁 right on! Always a good fan of yours. Keep these awsome videos coming man your doing a great job
Brilliant editing and great content. GO Army
I learned so much from this video. Thank You
Great video Maxx, keep up the good work. Looking forward to seeing the Moab trip.
Happy man right there congratulations
Great video! I’m about to get myself some nitro gears! Really debating between the 4.88 and 5.29 though.
Me too... still debating. I was thinking that it really depends what you do to the truck. I heard 33s or less for tires you stick with 488. Anything more than that or extra weight and tow, you go 529. I keep hearing different things though. It’s like there is no really correct answer.
@@vietta3771 I know eh, I’ve heard the 5.29 won’t be too much and I’m scared of doing 4.88 and not being enough for the hills and towing but in scary 5.29 will be too much for 80% city driving
@@Rickwynne I’m in the same boat. I’m running 33s now. 285/75/16… No lift. Probably won’t. It gear hunts all over Dallas Fort Worth. When it’s windy… it’s worse! 15-16 average mpg and with the way gas prices are, it’s getting about the same as my buddies stock raptor …
@@vietta3771 I feel like I’m gonna go 5.29 cause I don’t need to be doing 130+ km/h on highways always. And will be nice for towing and all the hills. Fuel
Mileage improved would be nice too, gas is outrageous
@@vietta3771 you end up doing a regear yet?
488's here; I completely agree. I wish 529's were available when I did my gears...
Same.. they came out almost immediately after I did my 4.88s
@@Chinese_Chicken what is making you change your decision? How come 488 wasn’t enough?
Cool truck bro. I had a 2nd gen and rocked the world with it.
I just installed a Magnusen Supercharger to my taco and DAMN its AWESOME now
How difficult was the install and where did you purchase it from?
the install was super easy took me and my son 5 hours@@ryanmcgivern1079
@@ryanmcgivern1079 Bought it from superchargers.com if I recall, I love my truck now
@@montemurray4513 is it stock gearing?
magnason superchaaaaaaaaarger changes everything, no gear change needed, best mod for the buck
Is there any videos on it? The few ive seen dont like it
@@Mycameron2323 have it bit change runs off from tundras
I had a 2007 WRX hawk eye in the same color it was so much fun. Miss that car.
Love this video! Thank you so much for sharing! This was exactly what i was looking for.
Great video, getting the right gear setup can make all the difference!
what was the total cost involved with the gearing
Fuel efficiency of the engine is different at different rpms and also at different throttle positions, so its crazy complicated to know the best rpm to run as driving conditions are very dynamic. Fuel efficiency is also affected by how the engine ecu is programmed. It isn’t always for maximum fuel economy due to power and emissions requirements. Gear ratio steps in the Tacoma 6spd auto are kind of strange and only Toyota could explain why they chose them as they don’t have even spread like a typical auto or manual. In addition, it seems that to protect the transmission, they program it to shift out of overdrive at a relatively low throttle position when requiring higher power delivery, especially at lower rpms where heat from loading/lugging it could affect its life. So regearing to get higher rpms allows the Tacoma to hold the gear longer as you will have more power available due to the higher rpms, but also, the programming of the shifting based on throttle position is allowing the transmission to hold the overdrive gears longer as the higher rpms mean less lugging.
Generally lower rpms are more fuel efficient but only if you have enough power in the engine at those rpms and you are not being detrimental to other things, like heat and stress and emissions etc. If you run, more weight, more wind and rolling resistance, bigger tires etc, you need to over-correct the engine rpm to get more power and better throttle position which will effectively and generally give you better fuel economy than stock gearing for the same exact driving conditions.
It would probably be best to let the dealer flash the ECU like a new truck. It has the ability to "learn" driving styles.
Truck sounds good and seems much more responsive. Good call.
I follow TW pretty much every day, and didn't see anything about 5.29's even being available at this time. 4.88 were the only option for 3rd gen Tacos as far as I could tell. I must have missed the chatter if there ever was any of the Nitro 5:29's availability.
It's truly a liberating feeling once you change gears, huh? Back in the 90's, I had an F150 with the 5.0, and something like 27" tires. I jacked that truck to the moon with a 3" body lift + 6" suspension lift, and 36" Swampers. Ran it this way for a few months and then regeared from 3:55 to 4:56 and that truck came back to life with extra ummph to boot!
There is a 5.29 thread on TW. They have been available for several months.
Thanks Marcus. I looks like it was just this summer that the 5.29 thread got started. It never popped up in my view when I clicked on "New Posts". So far it looks like just a handful of folks have been swapped to 5.29, but all are AT guys. Looking forward to hearing how it feels with the MT (like I have).
Thanks for the info. Video was good to watch. Not a bunch of jabber that wasn't related to the subject like some do. Keep it up. I'm from Lake Steven's so the area is very familiar.
Really helpful video man!!
Just experuencing the same problems with FJ, really considering regear it.
I just bought a 2019 TRD Off Road, and this is the first vid (and subsequent comment section) that I actually felt like engaging. You being from the Northwest made it even better. It's been tough finding a place online to discuss these things in a civil manner without the pretentious douche bags coming out of the woodwork screaming "mall crawler!" if I don't install a certain type of tire haha.
I have no idea what direction I'm going to take my mods in, but this is something I'm definitely going to be looking into at some point.
Even on my test drive, I can already tell that as much as I loved the truck, some of the "searching for gears" statements in this vid certainly felt validated. With all the "research" Ive done thus far, I know some changes will need to be made if I'm going to get the full potential out of my truck. I appreciate the vid. It was entertaining and informative. Subbed.
@@Maxx.Powell Thanks! That's good to know. The truck is still in transit from the factory, so I'll definitely make sure to bring that up when it arrives.
I have seen that mechanic in 2 videos. He is the Diff Master, and cool!
Lol the Diff master 🤣
Running 33's , Nitro 4.56 Gears, and Magnuson Supercharger, 2010 FJ, I am really enjoying the setup, Pulling a heavy Overland Teardrop, barely downshifts even going through the mountain passes. Very please with result.
Triad Expeditions that’s the perfect gear for 33s imho and experience.
Now with those gears the weight of a cap will be nothing, quality family truck mod right there 10/10 would recommend
Where are you on the job? I’m a LT in Portland Maine. 22 years on the job. I drive a ‘17 Tacoma with. 2” OME lift, front winch bumper and Warn winch. I haven’t noticed any drag yet, but I have 33’s. Might have to look into the 5.29.
How’s the MPG before the regear ? And after ?
I went from 14 to 17 w/4.88 gears in a 16 4Runner. 22-2300 rpm @ 60
Best question in comments, I wish it would get answered...
Answer????
@@ZacTexC what's your tire size, mods, typical terrain elevation like?
33 Toyo M/T 3” lift Fox 2.5, cold air intake n Borla exhaust. Denver
All I hear from UA-camrs is Tacoma transmission searching for gears, I have a 2020 tacoma TRD. Just drove from Washington state to Moab Utah and back. Truck fully loaded and a rooftop tent approximately 750 pounds total. About 1150 with myself and family in the truck. I have rock sliders diamondback bed cover, and load bars. My truck was never searching for gears, never upshift and downshift in sporadically or any of that. It held strong over all the massive long uphill grades. The vast majority of the time the truck stayed in one gear and pulled over the mountains with no problem at all. So I just don’t know what people are talking about when it comes to the Tacoma transmission. I’ve had no issues or complaints so far, no upshifting and downshifting searching, hunting for gears. Simply have not experienced that at all.
Being that you have a 2020 your ECU has updates alot of Tacomas on the road do not have. My 2016 Tacoma needed to be updated to fix this issue
@@Maxx.Powell thanks for mentioning that. I thought I was going crazy, like, am I the only tacoma owner who is not experiencing this? I think people might use "3rd Gen Tacomas a little to generically when discussing issues. I'm glad the re-gear worked out for you, seems like a huge difference. thanks for the reply, have a great day, and keep up the good work!
I appreciate your content.
Great video Maxx!!
Max, first and foremost, your channel is awesome! It's given me tons of ideas for my taco as well. But I just finished watching your video that's on the cbi channel and as a fellow fireman down here in texas, I gotta ask. Where'd you get that notre dame fd shirt?! That thing is sick!
Great video and super informative, i'll be regearing mine to the same ratio with nitro when I do my 8 inch suspension lift with 33's
Sounds like a bad ass build man🍻
Thanks brother 😁. Although I'm not planning on putting armor or adding much weight to my truck, I'm sure I'll still benefit a lot from those 5.29 gears once they're installed 😎. Stoked that yours is running a whole lot better now 💪
Did these gears help with the highway driving? Mine does that shit wear it feels like its pulsing or surging when accelerating especially inclines.
Great video bro!
Great video. Lots of misconceptions about gas mileage versus RPM. Every engine has a different power/torque vs rpm curve. When you map power/torque over a fuel consumption vs rpm you can see power efficiency over RPM. To get good fuel mileage you want to keep the engine in the RPM range that has the greatest power/torque efficiency. You derive the desired RPM from power/torque/fuel-consumption, not the other way around.
Great video, thanks for sharing the info.
For daily driving 529 gears with 35 inch tires, is way over the top. If you wanted to increase your crawl ratio when going Offroad, you could have put in one of those dual transfer case mods. With both transfer case is in Lo you would have a crawl ratio around 200, but the truck would be way more drivable in hi, and 2 wheel drive.
@@Maxx.Powell that's surprising. I would think you would have some issues maintaining higher highway speeds without going into high RPMs. Especially if you drive a manual with its higher 6th speed gear ratio. In any case I'm glad it worked out for you. I'm on 33s, so I definitely won't go above 4.88. Maybe get a dual transfer case way down the road.
mo hawk The 6spd auto in the 3rd Gen Tacoma has a very high 5th and 6th gear. .69 and .58. With a stock unloaded truck this works well to keep low rpm’s as you do not require much power. With a modified truck, ie. heavier, more wind resistance, bigger tires and more rolling resistance, you need considerably more power. This means you need to run higher rpm to get that. It is just physics. Regearing to keep the same rpm as stock rig would not benefit the drivability or fuel economy. The transmission would just have to downshift to lower gears to get higher rpm’s and higher required power effectively losing a gear or two. There is a balance point and each vehicle and driving situation will differ. In the end more power costs more fuel, but getting to use all 6 gears allows the truck to always drive at the lowest rpm for the conditions and saves fuel compared to only having the use of 4 or 5 gears due to the wrong axle ratio for the conditions.
@@gregsheridan not considering the additional weight, and just going off tire size, and the drivetrain gearing ratios, to get back to stock RPMs with 35 inch tires, you would need a 4.56 differential gear. With 4.88 and 35, you would have some additional torque to handle the extra weight, but still stay relatively close to the stock RPMs. The problem is that people choose their gear ratios with a mistaken belief that it will give them more "power". Which it does not. All a regear does is determine how efficiently the crank shaft torque is translated to the torque at you tire. If you're regearing to get more power, you're doing the wrong mod, you need an engine mod for that. Of course you can go with an arbitrary large differential gear, but the cost of this is constantly running your engine at many hundreds RPM above what it was designed for. I can't see how this doesn't affect engine life, and to some extent drivability.
My 2021 tacoma sits on 33x 12.5. It don't hunt for gears and it runs great......no issues at all , alittle bump stear due to tire width. That's about it.
"My name is Petie and I have gigantic balls."
How much did it cost to the regear done by those guys ?
@@峨眉峰-e7r no... Way too much... Other sources say 1500ish on high end.
@@brandonlifefamily8331 $1600 for the kit online, plus labor. (for 3rd gen tacoma)
@@峨眉峰-e7r its costly, but I would 100% trust these guys ,even tho I dont know them
I just purchased the 5.29 Nitro gears and the master install kit... $900. I'm doing the install because most reputable shops want $750 per diff... So $1500 for labor.
I’ve got 5:29’s in my Toyota with 35’s, it’s a little lower than stock ratios with the 31’s and it pulls great!
Would you go 5.29 or 4:88 when my manual 2019 Tacoma with 4.30 gears already. Great video and thank you 💯👍🏻
Maxx, Thanks for the info.
I ran 4:88 on my first gen 2.7 with a manual transmission.....loved it with 35's a TJM from bumper and a custom rear with swing arm....it was def a huge improvement over the stock gears
I've got a similar set up with 33s that I'm planning to regear. Did the 4:88s still have some amount of top end speed?
Chip Schoff it would hold 70-80 on the interstate, but I never really drove it that much faster than that....I think if you Google i8aheep it'll show you some old photos of it maroon std cab with a swing out tire on the tailgate
Hey max did you get front lockers?
Cost me about $2k to regear my jk and add a trutrac rear diff. Went to 4.56 from 3.21 with a 6 spd. Best mod I've done by far.
Hey Maxx, maybe a ECU flash by OVTuning?
I went from 2.73 gears to 4.10 gears in my mustang and it pulls hard af out of the hole. The best bang for your buck is gears hands down. My gas mileage stayed them same and sometimes worse but I’m on the throttle a lot more now. Top end didn’t kill me either.. I still went 152mph with 4.10 gears thanks to the 6 speed
What year mustang do you have because I top out at around 165ish with 3.31 and I have a 2014 gt
Andrew Bartholomew 2014 bro
@@FerRod2113 with lower gears your top speed would be higher
Andrew Bartholomew I know lol but those 4.10s rip like crazy from a dig. It barks the tires hard af going into second lol
@@FerRod2113 well mine do that too but it no fun when your spinning and not actually catching also if you have that high of gears and if you ever add boost you rev to damn fast to use it lol
I traded in my 2017 TRD 4x4 that I had for 10months because of the gearing. It wouldn't tow my boat with our hunting for gears not a huge boat either. Got a Tundra...no issues now. I didn't regear it because I didn't want to void the warranty
yes, more than like true. I figure I was only pulling 3000lbs or so that Atkinson function going from a 6 cy to 4 cy mode was super annoying and using the manual mode made my rpms super high.
U should of just Sent It !! when u pulled out of the shop ! lmao awesome
I cant wait to do this to mine and then also get the ovtune. my stock Tacomas going to be fast
After the break in period on my gears, I feel they smoothed out even more after towing my trailer after a 2 way 20 min trip. I recommend
Great vid bo
That's one sexy truck, if you ask me . I just got mine two months ago
Regearing will help power and mpg. Its something I should have done on my Jeep. I will do it for sure on the new Jeep when I do the tire upgrade. By the way, I saw your trailer parked at one of the Sand Flats Campgrounds the other day. I think it was Tuesday. I kept looking for your truck but never saw it.
Maxx Powell Yep, we ran fins n things. We always have to do it when in town. Its always fun.. I’m sorry too that i didnt get to meet you. I did run into a guy on Poison Spider Mesa that knew a guy that I know in Atlanta.. keep the video’s coming as I like watching your mods and adventures.
Dang. Thought he was gonna say that 4.88 is great, but 5.29 is devine!
I know this is an old video but next time I would suggest buying a Manual truck. I have 4.56 on my with 305’(34.54’) and zero issues going 100+ and wheel in’ like a beast.
hey man nice video can you tell me how much you spend and is it better on gas! thanks.
@Maxx Powell, Awesome video thanks for showing us your experience. I have a question though, where are your RPM's when doing 70mph? or 75mph?
Thanks in advance.
Enjoyed the video. 2 months ago I got a 2018 Tacoma 4x4. I’m interested in doing the same thing. Where would I purchase the gears and when I take it to a shop about how much would a job like this cost. For me the searching for a gear thing is annoying. Any information you can pass on would be appreciated. Thanks
This is like a $6000 install on a 4x4. I just got the Toyota Torque Overland tune, and it fixed the problem he was complaining about.
$500
Lolololol 😂
Dang cant believe you were here in cashmere if you ever need a ride let me know!!!!! I'd love to take my truck out and hit the hills around here!
Would love to see a full overview video of your build!
Maxx, thanks for the post. I have been frustrated with the sluggish response from the engine/transmission (6-spd auto) marriage in my 3rd Gen Taco. This is my third Taco in 10 years and certainly the most disappointing. I am wondering if you have documented your RPMs at highway speeds for 4th, 5th and 6th gears with the new 5.29s? I have a 2017 Taco Off Road and am curious to know the RPMs in each of the three highest gears at 60, 70 & 80 MPH. I do a lot of highway driving for work and find myself camping in 4th gear at 77-78 (in 70 MPH speed zones) around 3300 RPMs so that my truck doesn't continuously hunt for gears with terrain changes while also giving me some ability to get around folks sleeping in the fast lane. I have been looking for a solution for nearly a year and a half now and am wondering if 5.29s would be the right direction.
I am wondering the same thing. Would love to know as I’m about to do this to mine.
That was the perfect time to do ARB or Harrop lockers. Did Just Differentials recommend using a thicker weight gear oil? I would recommend using synthetic even for the break-in.
Good to know what you recommend, random commentor.
You now gotta give OV tune a shot.
Also, is he recommending 5.29 gear for any size tire? As long as you have a 3rd gen Tacoma? It seems like that is what he is saying.
I would say 33s and up with alot of armor will be good on 5.29s
Ir0nMaidan I have 33’s 10 ply and I think I want to go with the 5.29’s. Also I have an AT.
what if I have a manual transmission and plan to install 35 tires - should I go for the 4.88s or 5.29 will appreciate a response. This is a great video, thank yo.
That's amazing!