Got to be honest I had the Fusion 2 for over 2 years and all that happened was one of the replaceable sticks broke, i replaced it with one of the spare ones but i contacted Power A about it to see if i could get a new thumb stick and they sent me a new Controller, i never used the rear paddles they were awful. So now i Fusion 3 (3 months ) and its been great so far considering the amount of times my sons Elite controller has had repairs due to stick drift. So Power A Is pretty good for me.
My Fusion 3 is still working awesome. 0 issues. I play Fortnite almost everyday after work. Weekends I play a few others when I have time. A lot of use and so far, best Sub $100 controller I've bought
@@johnsysays The back buttons are just clicky like regular buttons. No issues. The trigger stops for me work better on the middle settings. They feel shorter on the third setting but in game the middle setting is quicker.
@@aa-kz7hc one is coming for Xbox, but I'm not allowed to say anything more than that 👀 I didn't sign a contract, but they asked me not to say anything about it lol. Keep an eye out though! Should be around soon
@vCuda wait wait wait you're telling me that a wolverine v2 pro is coming to xbox??? Because I just bought a v2 chroma, I'll return this thing right now and wait hahaha
Just got mines today and it feels great. Easy to swap out analog sticks due to the faceplate, four button mapping and it's super light when compared to a regular series controller.
I had been gaming on a basic AF (non enhanced/back button) PowerA wired controller for my oldie Xbox One S, and it surprisingly lasted throughout most of the pandemic (COD MW 2019-MWII 2022) with many hours of extensive game time before it inevitably succumbed to the stick drift grim reaper. I initially disassembled it and tried to fix or potentially mod, but inevitably my ASPD derived short attention span opted for saving it as a later "procrastination project". ¯\_(ツ)_/¯ Potentially revealing my Gen-Z age somewhat here, but I definitely have some fond memories (albeit short lived due to build QC) of a somewhat obscure and now fairly rare Modern Warfare 2/Xbox licensed wired Mad Catz 360 controller that had limited assignable back buttons. Back then tho? (get of my lawn Ha!) Such off shelf controller options where practically & conceptually unheard of! I used to sprint around maps like Terminal as if I were some freakishly stab happy tweaker via TAC-Knife and pistol loadout! Bwahaha! Anyway, being as it was a Mad Catz product? The permanently attached braided cable eventually developed an open circuit right at the top of the controller. Killing it. Within less than a year if I remember correctly? Anyway, now that my 9yr old is now a cross platform COD squad mate? I've been legitimately hankering getting a decent quality/affordable "Pro" controller, and I got to give many thanks and respect for you and Gamer Heaven's content, as it's been invaluably helpful! Seriously, you two guys should potentially do a podcast or live stream!! That would be dope AF! Thanks again bro! 🤓 Geezus this was a long AF comment! My bad. Iz be like dat sometimes... 🤪
I tried it out yesterday and it seems a bit stiff compared to a normal controller. I had it on 5% deadzone on both L and R stick and it felt like the deadzone was a lot higher then it actually was. For being pretty light it actually felt very stirdy and the new back buttons take a few hours to get used to. Overall for $80 its pretty good.
Had the old Xbox 1 controller for a few years and am looking to make an upgrade. Was wondering what the best possible option would be regardless of the price?
It depends on what you wanna do. Usually you don't have to pay outrageous money to get what you're looking for. If you just need some back buttons, the Fusion is a great option. If you want back buttons and adjustable clicky triggers, Hex Gaming makes some badass controllers even though their warranty doesn't cover stick drift Or, and I absolutely hate to say this, but the Elite Series 2 core isn't a terrible deal. At $120 you can buy the metal paddles for less than $10 and you can have the most feature rich wireless pro controller for $130 with a solid 1 year warranty. There are many options out there! If you want hall effect sticks for reliability, there's one controller coming out very soon with that technology. I can't say right now, just keep an eye out for it on the channel in the next few weeks if you're interested!
I bought my controller and it arrived today while i was updating the driver it asked for calibration after that updated froze and I can’t calibrate it through the app and manually. It doesnt work. When i move left stick up left and right triggers activate. but when I press the triggers they don’t work. Do you have any suggestions about what can I do?
I really wanted to like this controller. But upon getting it there's a few problems that I hope get fixed with a firmware update 1. The controller has a built in deadzone that you can not remove. Which makes doing micro adjustments impossible. 2. I don't know what it is but It feels like the controller isn't calibrated properly. Don't know if I got unlucky but at around 90% input it registers 100% input on the sticks. Which makes it almost unplayable for me. I ended up sticking with my victrix and I'm hoping they add a firmware update to address these issues.
@@Grape5oda I believe so. I forgot to mention that in my review, I brought it up when I reviewed the Fusion Pro 1 actually. Its the same thing here, the deadzone is nice when making broad wide movements, but small adjustments are a lot harder compared to even a stock XSX controller It's not unusable IMO, but it's definitely not as nice as a Dualsense Edge or Eswap S/X
@@vCuda Shit! You replied thanks bro. Yea so I got the g7 gamesir and I lowkey kinda hate it. Went right back to my stock series controller Also super interested in the eswap. I just want something reliable with extra buttons for apex don’t really care about the price 😩
Weird, I've been having no such issues with mine thus far. Immediately was messing around with the sticks after seeing a vid of a guy talking about his controller having laggy response times. No such issue on my end, no deadzone issues that I've noticed. But I'm also not using my FP3 for competitive gaming. Maybe that's where the difference lies, being that I'm not noticing the deadzone issue.
You’re effortless hilarious but informative Af, you’re going to be world-wide, MARK MY WORDS, Mr. Beast type beat, I see the vision, never stop. “Content Creation is the currency of the future” - Elon Musk. Don’t take my word for it.😅
The whole thing with rear button ergonomics is why I actually prefer the concept of paddles, as logically you'd have varying sizes and placements for a varying range in hand sizes and finger postures, yet no company does this. Which is also why I liked the concept of the paddle pack the first two Fusion Pros had, as logically you could have different modules to fit different styles, though it was never implemented in this way and, due to console limitations of never adapting to wider feature sets, probably never will be implemented in the best conceivable way. Controllers are one-size-fits-all, yet that's problematic when you look at how massive the range of just hand size is, and fixed front layout heavily influences how you grip the controller and where your fingers land on the rear, and what kind of posture they have; rear controls need to be a modular option for customizability, just like how we're seeing trigger stops, different stick heights, adjustable tension sticks, etc., just look at the KBM market and how many vastly different product options there are that span the range of human variance, yet controllers have been doing the opposite recently with centering towards a handful of common shell designs and dimensions. Though I feel like controllers, and really any peripheral, are severely overpriced. I really want to see the business side of these various companies and what the BOM and logistics costs actually are, I have a feeling any 'gaming' peripheral is _severely_ price gouged, especially at the scale these companies operate at, especially the ones that have units in physical retail.
I bought one to replace my Vitrix Gambit, the Fusion 3 had really stiff thumb sticks with large dead zones. The back buttons also read double inputs at times. Sent it back and spent the extra 20 bucks on they Gambit
I’ve had my fusion pro 1 for 2 years now, no stick drift no button issues. Only issues are that one of the paddles broke and headphone Jack broke as well but I have a wireless headset so doesn’t bother me.
I always take controllers apart and take our the rurmbles. Been doing this the S controller on original xbox. I hate the weight, especially when I play only wired.
Have you seen the new Epomaker controller that’s been advertised? Its apparently a full hall effect controller on both the tiggers and the thumbsticks. It seems to be pretty spec’d out, but after building a few of their keyboards for clients I’m a bit suspicious of those claims 😂
I have! They sent one over and it's much better than their last one. By a mile But holy SHIT their last controller lol. It was perfect on paper, and a nightmare in hand
i have had this controller for more then 1,5 years and play linear no deadzone and still no stickdrift. honnestly the best controller by far (had elite serie old and new that white gambit and a few others .i just wish it had better trigger stops and were wireless.9,5/10
The only thing I care about is joystick quality. I can care less about back buttons and other crap. Think u can do an affordable controller review for the people like me? Cuz there's a lot of us believe it or not.
I play apex legends and had three xbox controllers. Victrix gambit Nacon revokution x pro And now Thrustmaster eswap s. This controller is best. Especially sticks. Amazing. Controller has only one fault. Back buttons. if you have small hands you won't be able to reach it
Just dont buy powerA controllers simple as that. My powerA controller has malfunctioned 3 times (stick drift) and now i'm trying to get them to send me my 4th controller off a single purchase. Each time they send me a new controller it takes about 1 whole month. They are basically giving 2 years warranty for a product that only works for 3 months and then replacing it and replacing it until the warranty is over. Dumbest business plan i ever seen in my life.
It is a scam. Mine lasted a month and a half before it started malfunctioning. All button inputs were activating the RB button. PowerA ran me around for a month. I had to open four tickets and still the run around. Amazon came to my rescue even though it was after the return window, they sent me a label and gave me a full refund. A good controller when it works.....if money is nothing to you; buy it.
meh, the gamesir t4 kaleid or the g7 se are way better value (expecially the kaleid with the 1000hz polling rate), even though those have 2 rear buttons
pdp controller software can customize deadzone so it technically powera has the worst triggers on the market every other company has software or better triggers stops for their controllers on xbox.
I'm on Xbox X Series. What controller is gonna be my best bet for FPS, COD ect. With back buttons of course. Great content and I love the way you tell them like it is. Fuck em! 😆 🤣
I've used the Fusion 2 paddle/button controller for years. It has easily outlasted my previous Xbox controllers. IMO Fusion controllers are under rated and great value.
Tried the Victrix Gambit and took it back to bestbuy the next day. That back button layout was a recipe for disaster. The buttons take little force and i was doing a lot of accidental presses. And the back paddles on my Fusion 2 bend over time so they dont have the same feel anymore
Lighter is always so much better for controllers, at least for me. The Dualshock 4 feels so much more tight and responsive compared to the Dualsense. I just fit an ExtremeRate kit to my Dualsense and it's mad how heavy it is.
I was looking for a review on a controller and searched until I could find your page and couldn’t believe I wasn’t already subbed. If there ain’t a fro the reviews a no go.
do you know if the back buttons are detectable by rewasd to remap to keyboard buttons? otherwise, my biggest gripe is how they havent adopted the circular dpad dish yet
I’ve heard there’s a delay on these controllers csn only be resolved on pc , I play on console so if this is true I will not be able to play with a delayed controller
Late but those were for old model power a/controllers back in the 2019 days older versions. They have since then updated firmware for these controllers and can be configured in xbox apps/ power a app, etc.
I actually bought one of these about 3 days ago. It's pretty good for the price but I had to return it this morning because it wouldn't fit in my ass.
thumbs up!, now time watch it.
EDIT: Dang!@ /how old are you, like Logan-level health regen ability!
Got to be honest I had the Fusion 2 for over 2 years and all that happened was one of the replaceable sticks broke, i replaced it with one of the spare ones but i contacted Power A about it to see if i could get a new thumb stick and they sent me a new Controller, i never used the rear paddles they were awful.
So now i Fusion 3 (3 months ) and its been great so far considering the amount of times my sons Elite controller has had repairs due to stick drift.
So Power A Is pretty good for me.
Same
@@johnsysays no problems whatsoever loving it
@@johnsysays so far no issues at all just as good as when I had it
My Fusion 3 is still working awesome. 0 issues. I play Fortnite almost everyday after work. Weekends I play a few others when I have time. A lot of use and so far, best Sub $100 controller I've bought
@@johnsysays The back buttons are just clicky like regular buttons. No issues. The trigger stops for me work better on the middle settings. They feel shorter on the third setting but in game the middle setting is quicker.
Can’t wait for the Elite series 3 😂
2035 😆 🤣
Lol some day
Betting 100 that elite 3 will still have massive quality control issues and 40% of the controllers just won't work because Microsoft.
Hall effect, please! 😂
Elite series 1 was better than 2 so
I'm just waiting your review on Wolverine V2 Pro. I hope it will be soon!
I am BEYOND excited to review this. I have the perfect callback title and thumbnail, you guys are gonna love it. Plan to get that out in a few weeks!
@@aa-kz7hc one is coming for Xbox, but I'm not allowed to say anything more than that 👀
I didn't sign a contract, but they asked me not to say anything about it lol. Keep an eye out though! Should be around soon
@vCuda My wolverine ultimate still going strong but I need caps for the thumbsticks.
@vCuda wait wait wait you're telling me that a wolverine v2 pro is coming to xbox??? Because I just bought a v2 chroma, I'll return this thing right now and wait hahaha
"That is how iphone users are crafted"
F*cking THANK YOU.
The Fusion 4 aka (Battle Dragon) looking pretty good ngl
Just got that controller don’t recommend
please review the GameSir T4 Kaleid is a 40$ rear button hall effect sticks.
Just got mines today and it feels great. Easy to swap out analog sticks due to the faceplate, four button mapping and it's super light when compared to a regular series controller.
Has it fallen apart yet? I'm getting one tomorrow so I'd like to see how it's holding up
@@jayavionharrishow's the joystick is it good for aiming
I had been gaming on a basic AF (non enhanced/back button) PowerA wired controller for my oldie Xbox One S, and it surprisingly lasted throughout most of the pandemic (COD MW 2019-MWII 2022) with many hours of extensive game time before it inevitably succumbed to the stick drift grim reaper.
I initially disassembled it and tried to fix or potentially mod, but inevitably my ASPD derived short attention span opted for saving it as a later "procrastination project".
¯\_(ツ)_/¯
Potentially revealing my Gen-Z age somewhat here,
but I definitely have some fond memories (albeit short lived due to build QC) of a somewhat obscure and now fairly rare Modern Warfare 2/Xbox licensed wired Mad Catz 360 controller that had limited assignable back buttons.
Back then tho? (get of my lawn Ha!)
Such off shelf controller options where practically & conceptually unheard of!
I used to sprint around maps like Terminal as if I were some freakishly stab happy tweaker via TAC-Knife and pistol loadout! Bwahaha!
Anyway, being as it was a Mad Catz product?
The permanently attached braided cable eventually developed an open circuit right at the top of the controller. Killing it.
Within less than a year if I remember correctly?
Anyway, now that my 9yr old is now a cross platform COD squad mate?
I've been legitimately hankering getting a decent quality/affordable "Pro" controller, and I got to give many thanks and respect for you and Gamer Heaven's content, as it's been
invaluably helpful!
Seriously, you two guys should potentially do a podcast or live stream!!
That would be dope AF!
Thanks again bro!
🤓
Geezus this was a long AF comment!
My bad.
Iz be like dat sometimes...
🤪
I tried it out yesterday and it seems a bit stiff compared to a normal controller. I had it on 5% deadzone on both L and R stick and it felt like the deadzone was a lot higher then it actually was. For being pretty light it actually felt very stirdy and the new back buttons take a few hours to get used to. Overall for $80 its pretty good.
i have the same thing with the deadzone its a big dealbreaker for me
I take it back i found out you can change it
@@ott_cyntixx Is it the deadzone reset? Or what is it?
@@macostapr3951 you can change the deadzone of your sticks with the powera app
Yeah I had the same thing happened to me but I just put my dead zones to four
bro you a mma fan????
Had the old Xbox 1 controller for a few years and am looking to make an upgrade. Was wondering what the best possible option would be regardless of the price?
It depends on what you wanna do. Usually you don't have to pay outrageous money to get what you're looking for. If you just need some back buttons, the Fusion is a great option. If you want back buttons and adjustable clicky triggers, Hex Gaming makes some badass controllers even though their warranty doesn't cover stick drift
Or, and I absolutely hate to say this, but the Elite Series 2 core isn't a terrible deal. At $120 you can buy the metal paddles for less than $10 and you can have the most feature rich wireless pro controller for $130 with a solid 1 year warranty.
There are many options out there! If you want hall effect sticks for reliability, there's one controller coming out very soon with that technology. I can't say right now, just keep an eye out for it on the channel in the next few weeks if you're interested!
@@vCuda I ended up going with the V2Chroma but was heavily considering the Hex. Thank you for your help!
I bought my controller and it arrived today while i was updating the driver it asked for calibration after that updated froze and I can’t calibrate it through the app and manually. It doesnt work. When i move left stick up left and right triggers activate. but when I press the triggers they don’t work. Do you have any suggestions about what can I do?
I really wanted to like this controller. But upon getting it there's a few problems that I hope get fixed with a firmware update
1. The controller has a built in deadzone that you can not remove. Which makes doing micro adjustments impossible.
2. I don't know what it is but It feels like the controller isn't calibrated properly. Don't know if I got unlucky but at around 90% input it registers 100% input on the sticks. Which makes it almost unplayable for me. I ended up sticking with my victrix and I'm hoping they add a firmware update to address these issues.
They had one for the old Fusions but the FP3 doesn't seem to be getting the same treatment. Hopefully one day soon!
Does the fusion pro 2 have the same deadzone issue?
@@Grape5oda I believe so. I forgot to mention that in my review, I brought it up when I reviewed the Fusion Pro 1 actually. Its the same thing here, the deadzone is nice when making broad wide movements, but small adjustments are a lot harder compared to even a stock XSX controller
It's not unusable IMO, but it's definitely not as nice as a Dualsense Edge or Eswap S/X
@@vCuda Shit! You replied thanks bro. Yea so I got the g7 gamesir and I lowkey kinda hate it. Went right back to my stock series controller Also super interested in the eswap. I just want something reliable with extra buttons for apex don’t really care about the price 😩
Weird, I've been having no such issues with mine thus far. Immediately was messing around with the sticks after seeing a vid of a guy talking about his controller having laggy response times. No such issue on my end, no deadzone issues that I've noticed. But I'm also not using my FP3 for competitive gaming. Maybe that's where the difference lies, being that I'm not noticing the deadzone issue.
You’re effortless hilarious but informative Af, you’re going to be world-wide, MARK MY WORDS, Mr. Beast type beat, I see the vision, never stop. “Content Creation is the currency of the future” - Elon Musk. Don’t take my word for it.😅
I might be the only person that actually liked the weight of the Fusion Pro 2. I was disappointed to hear the weights were removed from the 3.
You should make a tier list of xbox controllers youve reviewed would be a great vid.Keep it up!!
Make a 4 back button hall effect controller under 100 appear on the market please. Summon that shit into existence for us for comp FPS gaming
The whole thing with rear button ergonomics is why I actually prefer the concept of paddles, as logically you'd have varying sizes and placements for a varying range in hand sizes and finger postures, yet no company does this. Which is also why I liked the concept of the paddle pack the first two Fusion Pros had, as logically you could have different modules to fit different styles, though it was never implemented in this way and, due to console limitations of never adapting to wider feature sets, probably never will be implemented in the best conceivable way. Controllers are one-size-fits-all, yet that's problematic when you look at how massive the range of just hand size is, and fixed front layout heavily influences how you grip the controller and where your fingers land on the rear, and what kind of posture they have; rear controls need to be a modular option for customizability, just like how we're seeing trigger stops, different stick heights, adjustable tension sticks, etc., just look at the KBM market and how many vastly different product options there are that span the range of human variance, yet controllers have been doing the opposite recently with centering towards a handful of common shell designs and dimensions.
Though I feel like controllers, and really any peripheral, are severely overpriced. I really want to see the business side of these various companies and what the BOM and logistics costs actually are, I have a feeling any 'gaming' peripheral is _severely_ price gouged, especially at the scale these companies operate at, especially the ones that have units in physical retail.
Exactly different hand size but the same controller 😢.
Here's a ? What if you only have access to a mobile as of right but plan to go to console later down the road? What are the options then?
I know I’m late but does anybody know how could the connection is when plugging in a wired headset?
This man is my favorite reviewer channel on youtube, its amazing
trigger stops broke within a week. Power A sucks now sadly. Used to be good.
The best 4 paddle controller is the Nacon Revolution Pro x bruh..
I agree cuda I love the dark knight rises
The Dark Knight Rises was ass
Best movie ever
@@Wrekkshoppe go away you
The dark night rises slaps DONT @ ME BITCH bruh that got me dying lol great review man thank u!
I bought one to replace my Vitrix Gambit, the Fusion 3 had really stiff thumb sticks with large dead zones. The back buttons also read double inputs at times. Sent it back and spent the extra 20 bucks on they Gambit
@pissedpajamas5718 500hz is noticeable from the standard 250hz.
Can i use it on ps5
Finally a review
I’ve had my fusion pro 1 for 2 years now, no stick drift no button issues.
Only issues are that one of the paddles broke and headphone Jack broke as well but I have a wireless headset so doesn’t bother me.
Also I use this controller almost every day for 3-7 hours
Had mine for 3 years v1
V1>v2
I play apex , no stick drift at all lol
V2 had stick drift out the box
Dark Knight Rises is definitely fire
I always take controllers apart and take our the rurmbles. Been doing this the S controller on original xbox. I hate the weight, especially when I play only wired.
Have you seen the new Epomaker controller that’s been advertised? Its apparently a full hall effect controller on both the tiggers and the thumbsticks. It seems to be pretty spec’d out, but after building a few of their keyboards for clients I’m a bit suspicious of those claims 😂
I have! They sent one over and it's much better than their last one. By a mile
But holy SHIT their last controller lol. It was perfect on paper, and a nightmare in hand
i have had this controller for more then 1,5 years and play linear no deadzone and still no stickdrift. honnestly the best controller by far (had elite serie old and new that white gambit and a few others .i just wish it had better trigger stops and were wireless.9,5/10
best controller
The only thing I care about is joystick quality. I can care less about back buttons and other crap. Think u can do an affordable controller review for the people like me? Cuz there's a lot of us believe it or not.
I play apex legends and had three xbox controllers.
Victrix gambit
Nacon revokution x pro
And now Thrustmaster eswap s.
This controller is best. Especially sticks. Amazing.
Controller has only one fault. Back buttons. if you have small hands you won't be able to reach it
Just dont buy powerA controllers simple as that. My powerA controller has malfunctioned 3 times (stick drift) and now i'm trying to get them to send me my 4th controller off a single purchase.
Each time they send me a new controller it takes about 1 whole month.
They are basically giving 2 years warranty for a product that only works for 3 months and then replacing it and replacing it until the warranty is over. Dumbest business plan i ever seen in my life.
It is a scam. Mine lasted a month and a half before it started malfunctioning. All button inputs were activating the RB button. PowerA ran me around for a month. I had to open four tickets and still the run around. Amazon came to my rescue even though it was after the return window, they sent me a label and gave me a full refund. A good controller when it works.....if money is nothing to you; buy it.
Had a wireless and I bought this plugged it in to play Apex. But the trigger blockers or whatever are not working. Do I have to do anything special?
meh, the gamesir t4 kaleid or the g7 se are way better value (expecially the kaleid with the 1000hz polling rate), even though those have 2 rear buttons
You should review the Hyperkin Xenon
Yo, that's fuckin sick! I might actually grab one lol
Great video mane keep up the good work
Great job with this video and anothers. I have a question, this controller can be use on pc?
This looks like it’s based on the series X model 1914. Wondering if I can add an extremerate clickykit to it 🤔
pdp controller software can customize deadzone so it technically powera has the worst triggers on the market every other company has software or better triggers stops for their controllers on xbox.
I'm on Xbox X Series. What controller is gonna be my best bet for FPS, COD ect. With back buttons of course. Great content and I love the way you tell them like it is. Fuck em! 😆 🤣
2:47 someone will still try and argue that Xbox controllers can be overclocked ☠️
First one I got the left stick button came not working so they replaced it and haven't had an issue since.
Power a has adjustable deadzone triggers in the poweraHq
the old gen wolverine ultimate goes for around 75$. I feel like its better in some ways than those other ones.
Razer buttons on the back suck, I have to stretch my whole hand.
@@pspcowlove my razor Wolverine Chroma v2🤷
Did gulikit make another kkp2 controller with paddles and still using rhe hall afect????
Honestly controller weight is a non issue. It’s not a mouse, as long as it’s not an actual brick
Bought a used elite 2 for 100 has horrible stick drift but im getting rings and kintrol freeks so hopefully that helps out sum
I've used the Fusion 2 paddle/button controller for years. It has easily outlasted my previous Xbox controllers. IMO Fusion controllers are under rated and great value.
Whens the video for the Chroma v2 Pro (ps5) controller coming out?
Are you going to review the Gamesir t4 kaleid? For 42$ it look really good.
Can’t wait till you try the hall effects from Marius 🤤
I need an Xbox controller w at least two back buttons and a lot of tension in the sticks. I hate loose sticks. Any thoughts?
Cuda, any plans on reviewing armor-x pro?
I've been using it for some time already.
Would be nice to hear your thoughts
Tried the Victrix Gambit and took it back to bestbuy the next day. That back button layout was a recipe for disaster. The buttons take little force and i was doing a lot of accidental presses. And the back paddles on my Fusion 2 bend over time so they dont have the same feel anymore
For all the people with small hands how do you hold the controller. Having a hard time getting used to it/ feeling comfortable
Can you do a Review of the PDP Rematch?
What controller for Xbox that has 4 extra buttons would you say is the best?
I have a fusion 2 for switch and I like it considering it was 65 bucks
Does it have vibration motors on triggers like original series x controller?
Lighter is always so much better for controllers, at least for me. The Dualshock 4 feels so much more tight and responsive compared to the Dualsense.
I just fit an ExtremeRate kit to my Dualsense and it's mad how heavy it is.
I was tryna wait until this review dropped. Literally just bought one today 🥴 lol
I have no interest in getting a controller, but I still watch because you're entertaining. Keep the UFC references coming!
I don't feel comfortable buying any new controllers unless I've seen a review from this channel about it haha Thanks for the info man.
You should review Flydigi Vader 3 3:)
i have this shit. i hate it with a passion.
Does the fusion 3 can assign the "window view" key to one of back buttons?
Fusion pro 3 $80 vs elite series 2 core $110?
where’s the victrix pro review video?
Only issue with power a are the analog sticks as mine have gone very stiff and squeaky
Men in black 3 was a great 3rd movie.
Buttons are so much better than paddles.
I was looking for a review on a controller and searched until I could find your page and couldn’t believe I wasn’t already subbed. If there ain’t a fro the reviews a no go.
15 controllers in 3 years. i use the gambit with two padles
thanks for all the great reviews!
last time i came this early i got ghosted
love this controller. for 80 usd it's just wow
I had the fusion 2 and its a great Controller 😊
do you know if the back buttons are detectable by rewasd to remap to keyboard buttons?
otherwise, my biggest gripe is how they havent adopted the circular dpad dish yet
I’ve heard there’s a delay on these controllers csn only be resolved on pc , I play on console so if this is true I will not be able to play with a delayed controller
Late but those were for old model power a/controllers back in the 2019 days older versions. They have since then updated firmware for these controllers and can be configured in xbox apps/ power a app, etc.
This is for Xbox series S/X???
that's gotta be the best comparison I've ever seen lmfao, I have no idea who you are but that was funny as fuck and I learned stuff thanks
Yeah he's great haha
For use on xbox what controller is best out of all you have used? Mostly fps and four back buttons
what are the polling rates on base powera xbox controllers?
Is there a playstation version of the power a controller or something close to it ????
There was a PS4 Fusion, but they didn't make it for that long unfortunately
Where can i buy only paddles??
Noticed that Victrix pro BFG in the back. Ready for that review
You can get the wolverine ultimate for less than $75. Sooo
Where
Dark knight rises does slap
I love you only 2 months late
IPhone users burned lol
Yes! Thank god you reviewed this controller!
Just here for the outro clip.