NO PAINT Professional Sprinter Van Cabinets | VAN CONVERSION
Вставка
- Опубліковано 1 лип 2024
- DIY Van Build Series 🚐
If you're learning how to build cabinets in your van, you'll quickly learn that most people finish their cabinetry using PAINT. I also painted the cabinets in my first van conversion! I'm not one to cut corners, so I put in the effort needed to make my painted cabinets look amazing. That effort was EXTREMELY time-consuming. This time around, I wanted to avoid painting any of my cabinetry so I went on a quest to find an alternative solution. I decided to use High-Pressure Laminate (HPL) in this van conversion and I think it looks WAY nicer. I love the finished product so I thought I'd share about my experience for anyone looking to learn how to build and finish their cabinets. Hope you enjoy!
00:00 - Intro
00:55 - Painted cabinets is a lot of work
02:16 - What is High-Pressure Laminate (HPL)
04:55 - How To Install HPL
🛠 Tools Used
Skillsaw: amzn.to/36nSff5
90 Tooth Blade (Size depends on saw): amzn.to/3oknoZv
Paint sprayer: amzn.to/2UAjoak
Glue: www.jackson.ca/
Tile Roller: amzn.to/3dTEGrn
Flush cut bit: amzn.to/2Hv2iqt
Router: amzn.to/3mhscNn
▶BEST SPRINTER VAN WINDOW COVERS◀
wdrfl.co/vanlife-accessories
💸 HOW MUCH DID MY FIRST VAN BUILD COST?💸
wdrfl.co/van-build-budget
🚐 Van Build Guide
Check out my Van Build Guide: wdrfl.co/ytvbg
📹Interested in More Videos? Click Here to Subscribe👇
wdrfl.co/ytsub
🌲 Follow Along!
Instagram: wdrfl.co/ytig
Facebook: wdrfl.co/ytfb
Twitter: wdrfl.co/yttw
Website: thewanderful.co
📸My Camera Gear
Main Camera a6500 - amzn.to/3aFZYqv
Most Used Lens - amzn.to/2Gkvnkx
Wide Angle - amzn.to/2Gkvnkx
Low Light - amzn.to/2urtj7H
Tripod #1 - amzn.to/38AJaQ8
Gorilla Pod - amzn.to/2TQkMWo
GoPro Hero 7 - amzn.to/3ayT3zD
My Drone - amzn.to/30Oqo4V
NDs For my Drone - amzn.to/2vcNl64
Camera Remote Must have for Selfies - amzn.to/2vhDv2Z
Video Remote - amzn.to/2NRCrZS
Video Mic - amzn.to/2Gj732k
External Recorder - amzn.to/30Lg5Pa
Cheap Video Lights - amzn.to/2NUxcc3
Small Softbox - amzn.to/2RjFbl8
Samsung SSD - amzn.to/36kAeww
Memory Card Wallet - amzn.to/37mTavV
Thanks for the suggestion!
I am not a painter. I tried a few panels and I hated it. Then I got some professional help and then hated it more. I just finished my FIRST HPL PANEL 🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯. Usually #SevenOSavage is my hero. Today it is you. #Salute.
The finished product looks beautiful and I’m sure it’ll hold up well. I’ve seen the HPL used on professional build but not by any of the DIY channels I watch. I’m sure you’ve inspired many DIY’ers to try it. Looking forward to seeing you more. 🚐
Awesome video Scott! Thanks for sharing this technique. Painting is indeed time consuming and stressful 😂. Looking forward to the edge finishing video.
You bet! PS I sort of cheated on the edges but it turned out really well.
Ahhh! 🥋My two favorite VanGangters in one comment! The universe is perfect at this moment.
What type of plywood do you recommend using?
Scott. I used laminate on all surfaces on my first van and it held up perfectly. It's incredibly durable and easily cleaned. The color and design options are endless and like you're doing, you can mix and match options. I made my own countertops with this as well. You are the first person that I've seen to use this and while it can be intimidating at first I believe anyone can do it. You also used marine vinyl on your ceiling, surprise I did that as well. I actually used that vinyl on my wall surfaces above countertop height as well. Looked amazing and held up perfectly.
Awesome! Yeah Im super happy with these products so far.
Awesome Scott. Looks incredible! Thanks for the video.
Hey Scott. Just came across your channel from Levi's video. Great stuff so far. Just wondering how you finished the edges of the ply? We've considered laminate in our builds but don't have one of those edge machines that cabinet makers have so have stuck with paint. Anyways - keep up the good work!
Here's a tip on placing the Laminate on the board after the application of cement. Instead of using a bunch of sticks or doweling I use a thick plastic like 10 mil. Lay the plastic over the cemented wood. The plastic will not stick to the cement. Then place your laminate on top of the plastic.....again the plastic will not stick to the laminate. Placement can be adjusted with real tight tolerances. Then clamp one end to secure the laminates placement. Start pulling the plastic back towards the clamped end. This will then make contact and is secured. You can remove the clamps and continue to pull the plastic out. It's kind of like pealing the protective layer on double sided tape.
I bet it’s way more durable too. Thanks for sharing the info Scott.
You bet
Thanks! cool stuff
Glad you liked it!
Legit as legit gets with you Scott ;)
Thanks!
Yep, HPL is the way to go for a professional look, for certain cabinets, you can laminate the components separately then assemble them after. If I may add: plywood panels need to be laminated on both sides and not too long between the applications, if not, they will curve badly.
Yes I did both sides 1 side in color and the other side on standard bright white
@@scottadamson6116 how did you do the edges of the cabinet windows? The oak style ones seem to be perfect edges
Nice maybe I will use it on my 2nd build I haven’t started my first yet.
You should
Nice info, great idea. Would be nice to see how you mount your outer panels on the 80/20.
Coming soon!
@@scottadamson6116 That would be great.
Hi Scott! You have really opened my eyes to the benefits of HPL. I noticed that wilsonart has an option for pre-glued (peel off) backing. Have you considered using that?
Great vid as usual, for sure will be trying this stuff, what about the panel edges/trimming?
Coming soon!
@@scottadamson6116 looking forward to it
Scott can you use HPL on thin ply as an 80/20 facing, but wrap the excess around the 80/20 to cover the aluminium inside the cabinets?
Hey Scott, I've been following you for a little bit and wanted to reach out since you're so helpful (and responsive to comments). When I pressed play I knew you were going to mention laminate because there's only so many ways to finish a cabinet. ;) I'm so glad you went in-depth, because I have been planning to use HPL in my build when that step comes, but I didn't know where to start. It's one of the sleekest, sturdiest materials, IMO. Did you do the inside of the faces too? Thanks again and make sure you put that HPL company in the description :)
P. S. I love your editing style and how you throw in little stills
Thanks for checkin g out the vids and glad you enjoy them. I am putting Solid white on the insides for two reasons 1. Its Cheap and 2. Brightens the inside of cabinets.
Great Videos Scott. Please stick with UA-cam and creative videos. Thank you sir
I’m also thinking to use the hpl. How did you finish the edges?
I did some test with some HPL but the hardest part was glueing the edges and the cut the excess with the hand router without scratching the Hpl.
Any advice?
Hi, great video. I had never considered using a laminate, I always thought it would be a nightmare to work with. It looks doable though with proper care and attention 👍. What thickness of plywood did you use as the sub base for the laminate?
Im using mainly half inch
No link to the laminate?
I've been looking for a better option than paint! How would you compare price of painting vs. laminate? It is significantly more expensive than painting?
I have been looking into this. Where do I find the hpl?
Re watched again. I gotta try and find a supplier but I want to try this. Thank you for the tip
YO SCOTT!
Hi
From one Canadian to another Canadian - great job eh! Two questions... 1: Can the HPL be used on entire walls?, 2: Why does the laminate piece not stick to the wood slats that you put down - seems weird that it didn't stick to the slats.
You put the contact cement on both surfaces. It won't stick well on surfaces without the contact cement (the scrap wood). Once the 2 surfaces with contact cement touch it's really really hard to pull them apart without breaking the HPL.
Yeah exactly its a contact cement so both surfaces need to have the adhesive applied for it to stick.
just another thing im going to do now with my build . what was the cost of the sheet and how many did you use . and looking back would you go for a ticker sheet
I think the thiner stuff is more than fine it comes in 4x8 sheets so it all depends on how much surafce area you are covering.
What the cost per sheet
Is this HPL nonflammable? Is it flame retardant HPL - unlike the standard ones, manufactured with special additives that make them flame resistant?
I would also use nonflammable contact cement (e.g. Dap Weldwood Nonflammable Contact Cement).
Im not sure.