PS4 Slim HDMI Connector Replacement Gone Wrong - Prior Repair attempt
Вставка
- Опубліковано 12 жов 2020
- ⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - Наука та технологія
Your face when you saw the board was just the funniest....fingers tapping on the desk...brilliant.
it couldn't be different don't you think? 😄
Yep, I agree 😁
Pin one is solid, pin two is solid, all pins are solid. I see no problems... 🤔😜
😂😂😂
😀😀Ya all pins solid
Actually, only *one* pin is solid
The jumper wire looked decent too.....
Everything is good
I think the one who repaired that is from a welder shop. 🤣🤣
😂😂😂You may say that again. The advice was we need must practice on dead motherboards but I think are not good students
me too
lol 🤣🤣🤣
Lol
7:44 Big boss backing off after turning the console on 😂
😂😂😂
🤣🤣🤣🤣
Hahahaha
Ok this has to be a meme, the customer was skilled enough to install a jumper wire so they definitely know how a port should be soldered on 🤣
I'm pretty sure these were the remains of the torn trace.
Maybe they didn't have a hot enough soldering station 😂
Not the first time I've seen this type of repair attempt, but man, I love your reaction and look of amusement into thr camera 😆. Well done!
I never get bored of your videos 👍🏼
I do enjoy watching your video's. Brightens up the day.
DUDE THIS WAS VERY FUNNY , You really get some crazy repairs there xD
Keep up the good work!
IDK why, but your videos are addictive...
not gonna lie i was extremely impressed by how professional you are adding solder mask to the wire. its really the little things that separate you from the rest
it's not solder mask it's just uv glue to prevent it from moving and breaking or shorting something else
Great work man...looking foward to see more
The prior fix looks like they did a really good job!
Awesome work !!! neat, clean and perfect
I watch your vids always. You inspire me 🙂
I'm always love it everything that you'r done sir, thank you for knowledge and entertaining
Amazing job as always!
lol, I am very proud of you for not going on a raging rant about the single solder joint. The silent smirk made me laugh. You were very professional. Two thumbs up. Thanks for the video.
I am having issues with new solder equipment. I get similar results as what came into your shop. I am new at micro soldering as a hobby and am practicing on scrap boards. You make it look so easy when you get solder on the tip of iron and roll the glob over the pads. You mentioned when the tip is bad, the solder won't stick to the tip and runs away from the tip. I thought it was because the iron was too hot. I have barely used any of these tips and now wondering if I ruined them by getting them too hot... I am going to keep practicing.
The person who tried to fix this, don't quit your day job.
Quit your day job. Try harder.
This was his day job, no one said he was any good at it!
Hope he was watching
Maybe dont pick something so intricate as your first solder attempt. Keep practicing.
0:15 Your face had me dying 🤣
Amazing soldering skills!! Great videos
Excelentes vídeos amigos, eres un crack 👍🏼💪🏽👌🏼
You are really perfectly successful at this works. Thanks for sharing. İ'm learning many things in this kind of videos. Wish 2 c u soon. Good luck.
I love the “check this work out” look at the beginning. That was funny!
That's what happened to me when i first started soldering, i used a cheap flux with a big conical tip soldering iron and the result was always a bridge like this one :)
So a good flux and the right tip size play a big difference when doing micro soldering
The look on your face while you were thinking of something nice to say... Good job!
I like your work. Even though I live in Bangladesh, I think once I go to your shop and meet you, go ahead.love you bro
I like your facial expression the moment you see how the hdmi pins soldered into the board (with tapping on the table )😁😁
I'm following you from Iraq and I try to learn from you i like your work it's cool and clean
A nice repair. I was wondering for a while if the board was going to work because of its other issues. For certain boards I'm wondering if it would be helpful to have a picture of a "known good" board for reference purposes. That way you could refer to the picture if you suspect that a component is missing on a board that you are working on. Thanks for the video.
🎩 Ladies and Gentlemen... Few have ever been so privileged to ride a Unicycle, witness a Unicorn, or even uncover the secrets of our Universe. But today, I stand before you without hesitation to introduce a very unique creature. Today, I have the distinct pleasure of presenting something that's truly one of a kind. Behold, the Unipin!! 👋
I laugh with voice. My girlfriend asked me what's going on and why I am laughing so loud :D I am a newbie in microsoldering but when I saw this "all in one" solution it was really funny :D
Thanks for the videos man
You are so good in your business. I wished to be a part of it.
He need practice I agree. And yes, you are missing some components on the other side. You are missing a capacitor near the diode. I can desolder one and give you the correct value if you need that. Great wok as usual. Keep up the good work!
Another great fix 👍
Hi boss lots of love from Windsor Ontario
"You need practice"
Man you are so gentle, I would have become Gordon Ramsay right there
Great job and video
Nice video. I like all of your videos!!!!
As ur Tutorial on recovery using Donor Harddisk ...removing Bios Chip nd swap the Bios that was work for me.in that Harddisk so much precious Data.Thanks for tutorial Coz only ur tutorial was Perfectly nd very cleanly Shows that What to do if we have Same Donor Harddisk.
Thanks #NorthridgeFix
You r really great boss🔥
Beautiful pice of work
He said: He need practice
I said: He need common sense
Common sense is a punishment because you have to deal with those who don't have it 🙃
It's not common sense. Most people never learn to solder
@@raidone7413 Truuuue... But common sense would be realizing they don't know what they're doing. Or just look at the ports or something with pins around that one to see what they're supposed to look like. Realistically we'll never know why, I thought it was funny. I still sighed deeply though but still funny.
I'm a novice but that looked like a good job, good solid connection.
Hha haa job is done and its work
When he completes work and laughs as he its get stisfied by his work. I dnt have such technician near me.
Love feom kerala india 🥰🥰
Love from india lovely and clean work
I have a question how do you get the solder to stick on the soldering iron mine always run off when it touches the iron
good jobs man :)
Good job
i like Watching your beautiful video i am from morocco have a good day sir and have a good life for you and your family God bless you 🙌🖒💟❤
Love ur videos 🤩❤️❤️
Please! What type of camera are you using to watch the work?
Incredible...
“HDMI installed correctly”. Sure pretty solid😄😄
Great job. How long did the repair take?
What solder wick do you use an what tip?... I have many come to me like this but always have hard time wicking off access solder.. what’s the best combination? Do I add low melt and add a bigger hotter tip with the wick or does that face pulling pads ?. Thanks
Is there a way to test the HDMI port with a multimeter to verify if that is indeed the issue?? I have a client that isn't getting picture but I wanna be certain before I just go replacing parts.
hello. around this ics rs3197al chip is short 4 capacitors show short on one and another side of mothebord. does that mean it needs to change? and what does this chip do? Please i need ansver
Could you explain about what you are doing at 4:12 at with what substance and light?
What do you use for clean up? Pcb after soldering
What is that blue stuff you put on top of that bodge wire?
Could you please tell me, what are the liquids that you used?
Actually i am going to do the same job. I have soldering grease and soldering tin.
Question for you, I bought a iPhone XS Max from a friends for $40 that had the back glass and front screen broken. I repaired it to give me something new to do but I tested the camera and it looks foggy. I tried cleaning it and blowing compressed air into camera lens and cleaning the glass lens as well. Any advise?
What type and size wire are you using for your jumper wires? Are they insulated or just plain copper?
A cuánta temperatura pones el cautín cuando usas la maya desoldadora
One of the funniest intros yet, lmao
im always watching your videos
Soldering skill over 100+
What liquid you use for cleaning flux in board?
How about the lost components? Did u replace them?
If i solder HDMI from ps4 to ps4 slim and is aligment little to right it will be problem if i correct this aligment ? its will be working ? or the pin on hdmi port is different to ?
So the bits that were missing weren't needed?
Nice work brother ❤️
Can you tell how u studied repairing and from where
My no 1 chanal 😍😍
Hello i have a question, what are you using to izolate the bridge made wit a wire between HDMI port and the tranzistor? i wait for an answer. BRGDS
Thanku thanku
Assalamualaikum brother. What type of microscope light do you use to get rid of the glare ??
The "wire" seemed to be the actual track who was lifted clean off the board :D
All the pins are making good connection
How long should we shine uv light toward that uv mask? Tq 😍🙏🏻
Good colleague, I came to the workshop with a similar problem, but with all the tracks skipped. I could make a schematic to know where to solder each pin. Thank you in advance.

Without replacing missing componants how board works??
Wow you always get the easy ones I be getting boards ripped in half and I missing all the pads
👍👍👍gute arbeit super👍👍👍
Loved your face upon the reveal. lol....
Impressive
What's the mic? I really like it! NICE VIDEO
Do you fix computer motherboards and graphics cards?
Very nice çok güzel video
I saw this thumbnail and fell out of my chair 😂🤣
hello what is the different between PS4 slim and PS4 i mean of the motherboards
What the hell???? Whats going on here? They way you look😂😂 Its really funny what you get at the shop. And i bet you see much more crazy things everyday. I bet this person used a leadfree solder. But you fixed it perfectly👍
WoW Sir...🙂👍
I thought he is really looking at me and smiling lol😂😂😂
hahahah I almost lost it when you showed all the pins together.
i have sumsung note3 with qualqomm snapdragon 800 can i change cpu with another one but the same pins
please bro answer me
يعطيك العافية
I'm surprised it worked afterwards with the bottom side looking like components were missing.
Is there a specific reason you're not using a desoldering tool (like Hakko FR 300) but solder wick instead? In understand that there're situations where a desoldering tool wouldn't work but in this case here it should work!?
Hi thanks for all vedio you ar the best, could you please tel me what modele of flux you use