HOW TO FIX A LEAKING CARBURETOR
Вставка
- Опубліковано 3 сер 2017
- DISCLAIMER: this was a Chinese carb used in the video and the float was inserted the wrong way then it would in a traditional carburetor. Put the float valve in the opposite way than what is depicted. The black needle side should be facing down and the other side contacting the float.
GO CHECK OUT AMPED APPAREL: www.shopamped.com AND MOTO TAPE www.mototape.com
Instagram = @letsrideusa - Спорт
DISCLAIMER: this was NOT a traditional carb used in the video and the float was inserted the wrong way then it would in a traditional carburetor. Put the float valve in the opposite way than what is depicted. The black needle side should be facing down and the other side contacting the float.
Mine is still leaking what should i try next
I guess im asking randomly but does any of you know of a way to get back into an instagram account?
I somehow lost the password. I love any help you can offer me
@Joel Levi instablaster =)
@Xzavier Dean I really appreciate your reply. I found the site on google and I'm in the hacking process now.
Takes a while so I will get back to you later when my account password hopefully is recovered.
@Xzavier Dean it did the trick and I now got access to my account again. I'm so happy:D
Thank you so much you saved my ass !
This guys made my day with his knowledge the part where he said the bouncy pump was the trick to fix my carburetor he is great and what i really really appreciate was such a short video because i hate to waste my time
worked for me ,I was only using my manual air pump. what happened was in the step when i opened my overflow screw nothing came out so I did next step and pump some air inside then some dirty gas came out like darkened gasoline but only a few then i pump some more air then more dirty gas came out and then redder clean one few seconds later, when it stopped spewing gas, tightened my overflow screw then turned it on with few tries like 25 kickstart, Good news was when it turned on no gas was leaking. This moment I will never forget in my life, more DIY wisdom. " thank you very much for sharing this informative video"
Praises to you good sir. You just saved me from disassembling four, 40y/o carbourators, a job I was dreading.
Lmaoo i just disassembled my kz1100s 4 carbs
I have a Honda VFR with four carbs. When I needed them cleaned I happily paid a guy to mess with it. I took one look at the exploded part diagram and said “NOPE.”
Thank you for this video, Let' Ride.
My issue was with a Yamaha EF2400iS generator which I take away yearly to boost the capacity of the four lithium batteries in the caravan.
Last year, I noticed diluted oil all over the ground sheet, but the generator still worked and I was able to continue using it.
But before my annual trip this year, I thought that I should investigate further, which lead me to your post.
Eventually, I gathered the necessary components to attach to the air pump and following your concise directions, I was able to blow the debris from the float bowl valve.
Unsurprisingly, the generator is now working much better than it did last year, thanks to your advice!
☺
You put float needle in upside down
Yeet
it was a chinese carb this model puts it in backwards
That can’t be. The rubber tip needs to seat. No where to seat upside down.
@AirlessGoose54 no, I have the exact same carb, he literally had it in backwards
@@Timmwardhow the fuck do you put it in right then?
thanks m8 I really didn't want to buy a new carby for my bike so I clicked on the first carby fix vid I found and it was yours and the first method fixed it cheers m8
So helpful! Gonna work on bike tom. Hope trail life will be starting back soon
Watched your video and blew air up my overflow tube and it worked! THANKS!
great video! no big preamble, straight to the point!
you're a legend mate!! the air up the overflow pipe sorted out my carb, cheers
Same, I’m so happy I didn’t have to take apart anything
I noticed the needle upside down too. LoL
Yes!!😂😂 n it wasn't old too
Yes I noticed it too. 👍👍🤪😂😂
Great video man💪🏽💯 This is exactly what I needed To See ! Thanks
Just what I needed to hear! Thanks! I’ll get to checking it and catch you later.
Thanks for sharing, the rubber o ring was damaged on my carb which might have contributed to the leak as well.
Yes bro thank u so much my carberrator was leaking I didn’t kno why and u legit helped me so much with this video u don’t even understand how much u helped me god bless u❤
Wow bro I appreciate it a lot u saved me 250 dollars man the bike shop said it’s a broken over flow or sum like that but I bllew air in it and it works fine now thanks bro I love u
You legit just helped me fix my bike cause my dumb ass couldn’t figure it out for weeks! It’s working now cuz of u! Thank u bro
So glad this video could help and get you back riding!
Thanks a lot man! Had the same issue and your vid helped me fix it! 🙏🙏
The gas line on my ltr only has the options of on, res, and prim what would I put it on or would I have to drain all the gas in the system completely
thanks for a nice video.and i was gonna ask you if my carburator ever gets dirty or clogged,can i just spray carburator cleaner to the hose and blow it with compressor?thanks again..
Thanks man very informative but you dont go on and on. This vid saved me alot of headaches great job bro
Joe Ashton thanks man! Glad it helped! Feel free to subscribe.
How can i find the float valve that fits my carburettor?
I have Dellorto PHBN 16 hs.
Thanks, compressed air option solved the problem and just as important saved time.
great video my question is i have a 06 Kawasaki kx450F i am leaking fuel from the overflow on the top of the carb overflow is this something different thanks
Thanks because of this simple video I fixed my son’s bike! 😊
Thank you man it really helps me. I appreciate your time.
Very good video bro, well executed and informative
This video helped me out a great deal. Thanks for the info bro.
The best video!!! Not just blow air thru it...badass work dude
My ssr 125 pit bike leaks out of the over flow tube when I wheelie could tjat be the float valve???
Very helpful thanks so much bro you know your stuff I'm new at this
He don’t know nothing cause if he did he would notice the float needle is upside down and he took it out and put it back the same way clearly he don’t know his stuff. Follow @ Unruly Ryders I do it correctly 💯
Just bought an ssr out the box and it was leaking think i should clean it even tho its new?
Just put an airfilter kit on my predator 212 and i have gas leaking out of my filter.... did i not put the jet on tight enough or could it be the bottom bowl not on properly or my spark pluf
Does the end of the hose have a screw in it,mine is hooked to a metal piece with no scree in the end of it,and that's were it leaks gas if I try starting it with the throttle on.???
The compressed air work out great 👍 👌 👏 thx..
Your "float valve" (needle) was upside down on your demonstration, and you did not place the "new float valve" correctly into the prongs of the float, which will cause failure of the needle to seat correctly to shut off fuel.
what do you think is causing this? streamable.com/smlbx4
carbs were cleaned few seasons ago, inspected carb it looks extremely clean
You didn't explain how to fix that issue.
Great video. Thanks for taking the time to help!
I see that this vid is a few years old, but the float valve seat was upside down. The rubber pointy part points into the center of the carb. If you really did reassemble the carb that way, I can not imagine how that would have stopped the overflow issue.
I was going to say the same thing .
Where can you buy float values?
where can I buy a float valve ?
Where do you get a flout could’ve from
Great Vid....quick to the point and not alot of jibberish...hella smooth!
Mine is still leaking after a good clean and replacement, what do I do
I have a Apollo dbx18 dirt bike that has a carburetor where I can't get to the float. the cover is riveted on. so I guess get a new one?
How do I order the correct valve for a specific carburetor?
Short n sweet. Great job son.
was trying to fix my carb very similar to yours but the O-ring came loose.. it's like impossible to get it back into place
Thankyou so much! Im a girl and I dont know anythig about engines. Ive just bought a small ATV for my field and it started to dump petrol from that tube. Now I know where to look, how to turn it off, I didnt have an air compressor so I just blew up the tube, its only short. Im not sure I could take the carburetta apart but at least I have some idea of what is going on with that float.
It started and fuel isnt coming out at the moment but it usually happens when I ride it for a while.
Update, Ive just found my tyre inflator for my car so Im going to try that!
Where can you buy new overflow pipe mine fell off?
Does this apply to push mowers too?
Bloody brilliant worked first crack after I did this thanks mate
Any links to buy that valve?
Can you also do this on a 49 cc carb
Thank you very much. This helped a lot! :)
great video man, helped out w my issue 🤘
Can I just tighten the overflow screw
thanks, bro very helpful.
What price of this bike in India ? From where buy this in India .
So glad u helped me with this bro easy fix
This video fixed my bike, Thanks!
Mine is pouring right out the over flow and it won’t even turn on .. Kim 125 sx
But how do u take the Carburetter off
This wasnt published on April then whats about the upside down needle :O
this was the problem and it workt thx ❤️❤️
i am not an expert but i tried opening and cleaning a motorcycle carburetor and i noticed even the first time that the needle and the float should be connected, if you successfully removed the float out from it's bowl the needle should come with it.
My 08 yamaha zuma is doing this I hope this fixes it ty
Crisp and Clear. Thank you.
The pointy part of the float needle should be pointing up (correct orientation of a carb) the pointy part is made of rubbery material so it can block and make a seal inside when the float do its thing.
Mine was facing downwards, do you think that was the reason my bike was overflowing?
Yes
he said that it was a traditional carb and he didnt relise
what if you put in a brand new carb and it still does this
Thanks bro that fixed my issue big ups!
What kind of bike is that
I’m leaking from the top of the carb at the top on the air intake side any idea?
you have flooded your engine
what does it mean when you only leak gas when your choke is “ on “ ??? a cold start . I own a 1983 atc 250R
My problem: i need new needle, but i live in Serbia, and there are no parts for my dirt bike (ttr90) in Serbia. I dont want to buy it on ebay because i hate waiting 3 months for package to arrive, and shipping price is huge, like 70$ shipping.
Hope it work changing my float valve try everything else
Hi. I am a newbie to the bike stuff. I am seeing fuel leak from carburettor. Still figuring out what causing it.
I just want to know is about that drain pipe. Is that left free or should we connect it somewhere cos while I was cleaning I saw it was hanging below, was a bit frightened. And after seeing your video the tube just hangs out. Is it okay... Please let me know.
Still need help?
It’s their to drain excess gas from the carb it supposed to be dangling their
Thanks this video was very helpful
Ok this kinda helps but the carburetor on my 4 wheeler leeks out of the drain tube on the bottom of the bowl when I put gas in the tank and the float is not stuck it just leeks so et me know what the problem is
you need to check all the rubber seals on the carb, there's also a possibility that you have an o ring on the pilot jet, it's the little hole that has the fuel coming through it, unscrew it and check the O-ring, might have to replace it, needs to be air tight in that tunnel where the pilot jet sits.
Thanks for the video ill try it on my generator, but whats wrong with leaking the remaining gas on the groung?
Leaking the remaining gas on the ground could cause the pavement to stain, so I like to empty the remaining gas into a container. Glad this video could help!
Wait isn’t hat flout valve in upside down?
Best video available thanks a lot
Thanks for the video and info!
So if my floats are stuck it will leek from the overflow tube only? My carb leeks I think from air fuel mixture screw any tips
There are rubber rings seals on the drain screw they tend to deteriorate over time and also they get lost. you can pick up new ones online or at your local motorcycle shop.
@@iam2much5 or get a new fuel mixture screw
Super handy, thanks mate
great video thanks for the help buddy🤝
This video was very helpful
very helpful thanks! liked and subbed
Your a life saver thank you so much
I got spark and gas but dosnt start pfff
I really appreciate this video,it really helps!Thanks a lot!
How to clean your motor . please teach us
thanks...some useful info re sticking float.....
I'm confused was that float falve upside down pretty sure it was
Yes def was
thanks man it helped a lot
Sweet fix very helpful not like other videos where they talk nothing but jibberish cool video
Wtf he literally has the needle in backwards
Best explanation on UA-cam .. thank u
thank you, very informative
Good to the point video, thanks