Mr. Tom thanks for the video. My wife's grandfather passed away and left us a boat just like this with the same motor. It has sat up for two years so this will be a start.
Thinking of buying a boat with this motor and was told it needed a water pump. This video gives me the confidence that if I needed to, I could replace it. Great video. Thank you for posting.
I always get dirt dinners in the rubber discharge pee hole... use weed wackier string and push it up as far as you can and clean it out, good video gonna check ours this weekend
Excellent job Sir. I'm reviewing this propeller water pump replacement on my boat and I came across your video. I agree to many tools...metrics and standard size tools.i learned from you Sir.ty
For anyone experience this same issue, I just fixed this on my 1994 Mercury Mariner 50hp. The outlet on the peehole was clogged. On the inside of the cowling where the peehole is you can slide the hose off the peehole. The plastic peehole piece itself was clogged with a rock or stick or something, I could not blow any air through it. Stuck a paperclip through to unclog, plugged the hose back on with a new ziptie to hold it tight, and now its working fine.
I was goin to say the little seal fell down I’ve got a older mercury motor I got to put a water pump in DONT look to bad a job just have to pay attention to what I’m doing thank you sir for sharing this video GOD BLESS
here in florida dirtdobbers wasp are notorious in stopping up water pumps I’ve never thought about using a shop vac myself i keep a 1/8” piece of round steel and prior to going fishing checking that port for dirt clogged and that seems to work fine. believe it or not have went fishing on a saturday afternoon and then went to go sunday morning and it already be clogged so they work fast. great video i hope i’m able to get around as good as you when i get around your age which isn’t to far in the near future.
Small pieces of debris can be pumped up through a small hose to the "pee port" and plug it up. The small hose can be removed and the debris cleared or use a small straightened paper clip and probe the in the small port hole to clear it. Mercury designed their cooling system this way to give the operator a visual confirmation that the pump is pumping water. On older Mercury engines the port was larger in diameter and mud dabber wasps are bad about packing them with mud. I know I had an older engine that this happened too. Good video sir.
dropp55 I have a older Mariner 50 hp and the pee hole is larger. After revving the engine in the shallow water with lots of silt in it ( was adjuating carburator )amount of water coming out of the hole has reduced to the minimum. What's the best way to clean it up or the impeller need changing? Thank you
@@alexzenihov893 what did u end up using? Its probably a good idea to remove the both end of that rubber jumper hose(from the fitting on the head...and from the outlet), and clean it out with a long piece of grass string trimmer line...also good to run de-salter or acid flush&rinse to clean the block regularly
By the way Pulled LU on my 03 50hp yesterday easy thx to you...opened WP and all was such good shape I just put it back without replacing anything...First Merc LU/WP for me ..sure easy compared to OMC I've changed
I have a 50hp merc & I just cranked it up & the alarm came on - going to check it out - I've had the nitro for 2ys & it's a 2001- not sure if the water pump has ever been changed & will do it after watching this video bc the water pump kit is less then $20 & I would hate to be stuck out the pungo & my water pump goes out. Good video.
Nice video if I was you I would cover the hole up most of the time bugs will make a net in there and that crazy but that's what they do I cover the holes on all 3 off my boats
Mine is a 1967 ish Merc Thunderbolt 500 50HP Four. I've replaced the impeller, and all the parts of the pump. I've blown air through the pipes and hoses and there are no obstructions, but still no water coming out of the tell tale... any thoughts?
Nice video. Can u clear up the two nuts you seperate before dropping the lower unit? We’re they accessible before splitting the case? Or did u have to seperate it an inch or two and the split the connection? And what happened to the jetway that fell out and was by the rag? Lol
Yes I took the shop vac and tryed to sell the hose around the hole after starting the motor and it worked. It may have just had trash in it all along. But now it's fixed. Thanks for watching my video
I coukd see that plastic washer under your impeller. I put all this one at a time down the drive shaft so its all in place. So u don't miss align things
Good vid. Gives me the know how to do it myself. At 16.50 though, a washer (maybe from the impellor?) appears in the tub. Then 17.04 the keeper drops down. Those bits did go back in?
I dont mean to be offtopic but does someone know a method to log back into an Instagram account?? I was dumb lost the password. I appreciate any assistance you can give me
@Justin Alvin i really appreciate your reply. I got to the site through google and I'm waiting for the hacking stuff now. Takes a while so I will get back to you later with my results.
Sometimes wasps make a nest in the pee hole. I usually poke in the hole with a wire and break it up and if not try the thermostat it could be clogged or not working
follow that instrutions and you can feel happy you need a new motor after. But if you really wanna fix/change your impeller its only to find an other video here
These guys go out of their way to make videos to help us who aren’t very versed on doing these things without a little help, and guys post stupid remarks. Why don’t you Einstein’s post then?
This video is ok but needs more info. Plus there is some things I’d question. Like the washer that seems to had been left off after he put it all back together. And other things.
Mr. Tom thanks for the video. My wife's grandfather passed away and left us a boat just like this with the same motor. It has sat up for two years so this will be a start.
Thinking of buying a boat with this motor and was told it needed a water pump. This video gives me the confidence that if I needed to, I could replace it. Great video. Thank you for posting.
I always get dirt dinners in the rubber discharge pee hole... use weed wackier string and push it up as far as you can and clean it out, good video gonna check ours this weekend
I've got an 06, pisses pretty good at higher rpms, but next to nothing at idle. Im going to change it tomorrow, thanks for the video.
Excellent job Sir. I'm reviewing this propeller water pump replacement on my boat and I came across your video. I agree to many tools...metrics and standard size tools.i learned from you Sir.ty
Glad it was helpful! Thanks for watching.
For anyone experience this same issue, I just fixed this on my 1994 Mercury Mariner 50hp. The outlet on the peehole was clogged. On the inside of the cowling where the peehole is you can slide the hose off the peehole. The plastic peehole piece itself was clogged with a rock or stick or something, I could not blow any air through it. Stuck a paperclip through to unclog, plugged the hose back on with a new ziptie to hold it tight, and now its working fine.
I was goin to say the little seal fell down I’ve got a older mercury motor I got to put a water pump in DONT look to bad a job just have to pay attention to what I’m doing thank you sir for sharing this video GOD BLESS
Very clear instructions that give me the confidence to do it myself. Thank you!
I’m at 18:41 I’ve got to mow and weed eat I’ll finish watching in a little while GOD BLESS
Excellent Video. Watched several, your's was the best.
Wow, thanks!
here in florida dirtdobbers wasp are notorious in stopping up water pumps I’ve never thought about using a shop vac myself i keep a 1/8” piece of round steel and prior to going fishing checking that port for dirt clogged and that seems to work fine. believe it or not have went fishing on a saturday afternoon and then went to go sunday morning and it already be clogged so they work fast. great video i hope i’m able to get around as good as you when i get around your age which isn’t to far in the near future.
Very good video. Text book instructions. Now when I do mine, I'll feel like I've done it before.
Thank you. Going to attempt switching the impeller.
Thankyou so much for showing me ❤
Small pieces of debris can be pumped up through a small hose to the "pee port" and plug it up. The small hose can be removed and the debris cleared or use a small straightened paper clip and probe the in the small port hole to clear it. Mercury designed their cooling system this way to give the operator a visual confirmation that the pump is pumping water. On older Mercury engines the port was larger in diameter and mud dabber wasps are bad about packing them with mud. I know I had an older engine that this happened too. Good video sir.
Thank you very much and thanks for watching my video
dropp55 I have a older Mariner 50 hp and the pee hole is larger. After revving the engine in the shallow water with lots of silt in it ( was adjuating carburator )amount of water coming out of the hole has reduced to the minimum. What's the best way to clean it up or the impeller need changing? Thank you
@@alexzenihov893 Take a coat hanger and run up the pee hole. Usually mud dobbers clog it up
@@alexzenihov893 what did u end up using? Its probably a good idea to remove the both end of that rubber jumper hose(from the fitting on the head...and from the outlet), and clean it out with a long piece of grass string trimmer line...also good to run de-salter or acid flush&rinse to clean the block regularly
have any bright ideas if the nuts holding the gear shaft, at 4.30 are ceased?
Thx good info...Been the Mud Dobber rout several times....Sugg take the Prop off sure lightens load esp if its SS.
By the way Pulled LU on my 03 50hp yesterday easy thx to you...opened WP and all was such good shape I just put it back without replacing anything...First Merc LU/WP for me ..sure easy compared to OMC I've changed
Teşekkür ederim emeğine sağlık çok faydalı video.
I have a 50hp merc & I just cranked it up & the alarm came on - going to check it out - I've had the nitro for 2ys & it's a 2001- not sure if the water pump has ever been changed & will do it after watching this video bc the water pump kit is less then $20 & I would hate to be stuck out the pungo & my water pump goes out. Good video.
Nice video if I was you I would cover the hole up most of the time bugs will make a net in there and that crazy but that's what they do I cover the holes on all 3 off my boats
Mine is a 1967 ish Merc Thunderbolt 500 50HP Four. I've replaced the impeller, and all the parts of the pump. I've blown air through the pipes and hoses and there are no obstructions, but still no water coming out of the tell tale... any thoughts?
A lesson I always seem to never remember. Always start with the easy part first.
thanks for watching.
Thanks for sharing
Was helpful
If i have oil in my motor could it be it?
Well done great info . Hi from ireland
Nice video. Can u clear up the two nuts you seperate before dropping the lower unit? We’re they accessible before splitting the case? Or did u have to seperate it an inch or two and the split the connection? And what happened to the jetway that fell out and was by the rag? Lol
So u vacuumed the little hole? I’m having the same issue.. won’t spit back water after replacing the impeller
Yes I took the shop vac and tryed to sell the hose around the hole after starting the motor and it worked. It may have just had trash in it all along. But now it's fixed.
Thanks for watching my video
Is that a 2 stroke like 2001 Motor?
I coukd see that plastic washer under your impeller. I put all this one at a time down the drive shaft so its all in place. So u don't miss align things
thank you for the video
Good vid. Gives me the know how to do it myself. At 16.50 though, a washer (maybe from the impellor?) appears in the tub. Then 17.04 the keeper drops down. Those bits did go back in?
I dont mean to be offtopic but does someone know a method to log back into an Instagram account??
I was dumb lost the password. I appreciate any assistance you can give me
@Ronin Nash instablaster =)
@Justin Alvin i really appreciate your reply. I got to the site through google and I'm waiting for the hacking stuff now.
Takes a while so I will get back to you later with my results.
@Justin Alvin It did the trick and I actually got access to my account again. I'm so happy!
Thank you so much you saved my account !
@Ronin Nash no problem xD
Sometimes wasps make a nest in the pee hole. I usually poke in the hole with a wire and break it up and if not try the thermostat it could be clogged or not working
GREAT video. When the hell are we going fishing?
Put a little bit of black electrical tape around your swivel and it will stiffen it up a little bit and make it a little easier for you
Be sure to put all the washers back in.
Well done
follow that instrutions and you can feel happy you need a new motor after. But if you really wanna fix/change your impeller its only to find an other video here
Thanks for the vid sir.......very helpful
Thank you very much and thank you for watching our videos
Can you show hoow oild change and gear oil change for this engine. Thanks
thank you mate
No worries. Thanks for watching.
thank you for the information you are amazing
Great video you got my subs
i got the same mercury outboard /do you have a carburetor video i can get mine not to leak
Plastic washer is out of place in the cover plate, no grease in the cover plate, so you will be redoing it soon
Dirt Dobber clogged the pee hole up . Happens every time . You ready to sale the boat ? Looking for a good perch setup myself .
thanks
Your seal for the impeller slipped out
Thanks
We keep weed Wacker line on the boat
15:46 seal not in correctly 🙄 and holy craps im getting dizzy just watchin this guy shake like he gettin electrocuted
thanks for watching.
These guys go out of their way to make videos to help us who aren’t very versed on doing these things without a little help, and guys post stupid remarks. Why don’t you Einstein’s post then?
thanks for watching.
Buying a new tool every time you do something. Ain’t that right
yes, it seems like it, he had so many tools I never knew if it was old or new unless he was opening a new box. Thanks for watching.
This video is ok but needs more info. Plus there is some things I’d question. Like the washer that seems to had been left off after he put it all back together. And other things.
Move the camera back!
Thanks
thanks for watching.