It's a good idea...I've been painting since 1982 and just got used to pushing a Hamilton scuttle up against a wall when doing ceilings and walls, but if you leave it set in one place, it involves a lot of walking back and forth at the end of the day..and just used to kicking the scuttle around the room when knocking out the walls....So deffo think this is worth a go, and you can always just revert it back to a normal scuttle if you're not keen on the casters..nothing ventured and all that and I wasn't aware of this scuttle so thanks for the info. Keep up the good work CM, and great vid as usual!..👍
I’ve had a Purdy bucket for 3 years. I didn’t know they had the caster wheel slots for them. I was going to build a rig to hold the bucket, but lazy. I believe I’ve seen guys use a moving dolly for Wooster buckets. Thank you for sharing.
2 peaces of wood glued together and put on one of the corners should solve the problem with the corner roller. Very comfortable bucket! Wish to have one.
Nice video mate , just as you said pity about the corners , you'd they'd make it like the normal scuttles but no doubt purdy have a reason for this design, maybe a rep of theirs will be in touch with you especially after doing a video on it 👍 .... cant beat a bit of free advertising 👌 , there sales of these will be boosted now 🙌
Mark could make a small corner peice of plastic or timber with a two gall handle so it can clup inside this purdy so you can use the corner roller adapt a big tupper ware tub or something.
Bit of a ball ache carrying me stairs when full I always feel of balance And never seam to dry out properly or go hard Constantly softening when you load up your roller and end up with shit/skin on your finished area Bigger isn’t always better but I’ll stick with it
Do you wash it out every time or just leave the bit left to dry out? Just curious as your old one looks caked in old paint. I always use a liner with my 15L scuttle but don't think you can get liners big enough for this purdy unless you buy their rigid ones at £14 for 3! Think I'm going to go for the Wooster wideboy and use their liners, but I think the purdy is better although a bit big for an 12' roller, wish they did a smaller one with cheap liners.
I guess im randomly asking but does anyone know of a way to get back into an Instagram account? I stupidly lost my account password. I appreciate any help you can give me.
@Arjun Briggs I really appreciate your reply. I found the site thru google and I'm in the hacking process now. I see it takes a while so I will reply here later with my results.
That purdy bucket is only for using 18inch roller s but there worth it I have got mine on some wheels you save loads of energy rather than dead lifting it all day ,over size roller s can be used ,18 s all the way
I use the narrow plastic roller tray thing that came with the hyde corner roller and put it in a smaller scuttle , i stuck two bits of wood on each side of it to make it more sturdy . I have that purdy scuttle but didn't realise you could put wheels on it . Nice one.👍 I prefer the large Wooster ones though as i have lids for them so can keep paint in them for days.
The Purdy comes with a lid, but maybe a recent addition ? But they do have it … I carry a spray bottle of water and mist a couple mm on the top of my (water base) paint to create an air barrier then close lid. A-little more misting for a weekend absence. I also use the Purdy as a tool box… start day I just dump it (tape,caulk, dust brushes, blades / mud) in my corner. Drop sheet sits on lid and I carry 1 handed. Tomorrow I’ll bring in the rest for paint day/z.
@@wallingtonfilming I just make my own roller dolly mate piece of plywood 3inch bigger than base of scuttle four lengths 2x2 around so it dont fall off four cheap castors fucking Brill pal saves a load of effort cost less than a tenner to make
Plastic scuttles waste of time and money save up and get a metal one,the trouble with the plastic ones are mainly you get into the habit off kicking them which tends to break of a dried paint hence bits everywhere.
@@jackwardley3626 Can't find the lid available anywhere in the UK . That's why i bought a couple of Woosters as you can get the lids. Doesn't fit the Purdy. Can't find any where in the States that delivers to UK either.
@@jackwardley3626 i contacted Purdy UK yesterday who told me they will be stocking the lids and Nest tray system, that fits the scuttle, at the end of May . Literally can't find it anywhere else.
That's called putting wet paint over dry paint and it re softens it. Nothing to do with it being a purdy scuttle they all do it. It's the nature of paint. If your not using a clean scuttle or liner/bin bag everyone you roll then you'll get bits rolled onto the wall. It's inevitable. I buy 20 bin liners fro Co Op for 2 quid and they fit perfect. Don't even have to tape at the edges they stretch over the edge of the large scuttle perfect. Then when done pull the edges off around the scuttle pick the bin liner up out of the scuttle and slice a hole in the bottom of the bag with a blade above the paint tin and it will all funnel back into the tin without wastage. Almost like piping a cake haha. No mess no wastage no dry bits in paint and saves time
It's a good idea...I've been painting since 1982 and just got used to pushing a Hamilton scuttle up against a wall when doing ceilings and walls, but if you leave it set in one place, it involves a lot of walking back and forth at the end of the day..and just used to kicking the scuttle around the room when knocking out the walls....So deffo think this is worth a go, and you can always just revert it back to a normal scuttle if you're not keen on the casters..nothing ventured and all that and I wasn't aware of this scuttle so thanks for the info.
Keep up the good work CM, and great vid as usual!..👍
Just bought one of these gonna grab some wheels grate video candleman keep them coming 👍👍
I’ve had a Purdy bucket for 3 years. I didn’t know they had the caster wheel slots for them. I was going to build a rig to hold the bucket, but lazy. I believe I’ve seen guys use a moving dolly for Wooster buckets. Thank you for sharing.
Been using this for the last year brilliant Job love the rolling angle not straight like the standard ones
Valley Pro Products sells the disposable liners for the Purdy bucket
2 peaces of wood glued together and put on one of the corners should solve the problem with the corner roller.
Very comfortable bucket! Wish to have one.
I've been told about this but never seen it done, my Purdy Bucket is getting an upgrade
Nice video mate , just as you said pity about the corners , you'd they'd make it like the normal scuttles but no doubt purdy have a reason for this design, maybe a rep of theirs will be in touch with you especially after doing a video on it 👍 .... cant beat a bit of free advertising 👌 , there sales of these will be boosted now 🙌
Mark could make a small corner peice of plastic or timber with a two gall handle so it can clup inside this purdy so you can use the corner roller adapt a big tupper ware tub or something.
Looks good .ill get on for my 460 mm or in your language 18 inch roller
Bit of a ball ache carrying me stairs when full
I always feel of balance
And never seam to dry out properly or go hard
Constantly softening when you load up your roller and end up with shit/skin on your finished area
Bigger isn’t always better but I’ll stick with it
Top bit of kit
Do you wash it out every time or just leave the bit left to dry out? Just curious as your old one looks caked in old paint. I always use a liner with my 15L scuttle but don't think you can get liners big enough for this purdy unless you buy their rigid ones at £14 for 3! Think I'm going to go for the Wooster wideboy and use their liners, but I think the purdy is better although a bit big for an 12' roller, wish they did a smaller one with cheap liners.
can see that going down a hallways stairs when its full of paint mistakes happen haha looks a good bit of kit
I guess im randomly asking but does anyone know of a way to get back into an Instagram account?
I stupidly lost my account password. I appreciate any help you can give me.
@Kingston Matias instablaster :)
@Arjun Briggs I really appreciate your reply. I found the site thru google and I'm in the hacking process now.
I see it takes a while so I will reply here later with my results.
@Arjun Briggs It did the trick and I actually got access to my account again. I'm so happy:D
Thanks so much you saved my ass :D
@Kingston Matias Happy to help :D
is nice bit of kit is not good for diyer or homes owner need to have a biger spaces to store it enjoyed the video.
That purdy bucket is only for using
18inch roller s but there worth it I have got mine on some wheels you save loads of energy rather than dead lifting it all day ,over size roller s can be used ,18 s all the way
I use the narrow plastic roller tray thing that came with the hyde corner roller and put it in a smaller scuttle , i stuck two bits of wood on each side of it to make it more sturdy . I have that purdy scuttle but didn't realise you could put wheels on it . Nice one.👍
I prefer the large Wooster ones though as i have lids for them so can keep paint in them for days.
The Purdy comes with a lid, but maybe a recent addition ? But they do have it … I carry a spray bottle of water and mist a couple mm on the top of my (water base) paint to create an air barrier then close lid. A-little more misting for a weekend absence. I also use the Purdy as a tool box… start day I just dump it (tape,caulk, dust brushes, blades / mud) in my corner. Drop sheet sits on lid and I carry 1 handed. Tomorrow I’ll bring in the rest for paint day/z.
go round tescos with that bad boy
where can i find liners for that big scuttle?
Lovely JuBLY 😊
Is the Name of the wheels? Or a link to much to ask for? Come on brotha help us out there’s a shit ton, trying to get the perfect fit
Where or what brand of weel caster did you buy?
Office chair, wheels off Amazon 🕯☕️🚬
Can wimmin use it too?
Where can I buy this wheels?
Virgin scuttle. Good name for a band.
Candleman where did you get your castors wheels from ?. Cheers 👍
Vincent Saward
Amazon £16.00
@@wallingtonfilming thanks buddy 👍
@@wallingtonfilming I just make my own roller dolly mate piece of plywood 3inch bigger than base of scuttle four lengths 2x2 around so it dont fall off four cheap castors fucking Brill pal saves a load of effort cost less than a tenner to make
U got a link for the castors boss.?
Plastic scuttles waste of time and money save up and get a metal one,the trouble with the plastic ones are mainly you get into the habit off kicking them which tends to break of a dried paint hence bits everywhere.
Do you have a link to the wheels please?
Just go on Amazon and get a set of five wheels for Office chairs
18 minutes,it's a fuckin paint scuttle on wheels 😩
I prefer the Wooster, I would imagine the scuttle moves about too much when you are loading roller up
@@jackwardley3626 Wooster Ive got has a lid
@@jackwardley3626 Can't find the lid available anywhere in the UK . That's why i bought a couple of Woosters as you can get the lids. Doesn't fit the Purdy. Can't find any
where in the States that delivers to UK either.
@@jackwardley3626 i contacted Purdy UK yesterday who told me they will be stocking the lids and Nest tray system, that fits the scuttle, at the end of May . Literally can't find it anywhere else.
Where can I get the wheels can't find anywhere 😭
Psi Clops
Amazon office chair caster wheels
@@wallingtonfilming ohh ok ty bro will try!
When you load your paint up it's gonna move everywhere too much not worth it mate
Buy some flex tape or flex seal lol
It's like a fuckin cows troff
Line it with plastic. Minimal clean up.
That won't fit into your punto ur girlfriend could wash your clothes in it she be used to washing by hand 💪
Not for me
Waste of time. 25 years new work, the Purdy scuttle peels when semi dry too
That's called putting wet paint over dry paint and it re softens it. Nothing to do with it being a purdy scuttle they all do it. It's the nature of paint. If your not using a clean scuttle or liner/bin bag everyone you roll then you'll get bits rolled onto the wall. It's inevitable. I buy 20 bin liners fro Co Op for 2 quid and they fit perfect. Don't even have to tape at the edges they stretch over the edge of the large scuttle perfect. Then when done pull the edges off around the scuttle pick the bin liner up out of the scuttle and slice a hole in the bottom of the bag with a blade above the paint tin and it will all funnel back into the tin without wastage. Almost like piping a cake haha. No mess no wastage no dry bits in paint and saves time
Get some new overalls mate
A video all about a big posh,strong paint scuttles... FFS!