If you want more of the story I have an Origin of Captain Xavier video over on my Lego Channel. :P Wild West re-enactment is cool! And apparently very popular in Germany...
Ahhh, nice. I put a Kronos spring in mine, but I didn't even try to put it over the stock spring, I just switched them out. Have you run it through your Chronograph? I'd love to know what numbers you're getting! And definitely take the break action shroud thing off, I did with mine and there's no going back!
Nerf Gun Attachments I was actually going to suggest he check out what you did with the shroud. When I get around to picking one or two up, that is what I want to do.
Yes please more stock attachment points!!!! And i agree i like horizontal pump grips more than pistol grips, although i do like the occasional vertical pump
I have a plan once I can get my hands on a tribreak and its to modify it to be a shotgun and after it fires the darts the front end springs open and so its gonna be a lot of testing but it seems useless but fun anyways lol
Hey Cap, have you heard about the Infimus? Apparently, it has a system for topping up its magazine, like a Quick 16 with removable mags. It will apparently cost a fortune because Hasbro, but I think you will want to isolate that mechanism and figure out how to make one for EIR.
I have seen the speculation videos but I put little stock in speculation. I am looking forward to seeing it and if there is a new system I will certainly look into it. :)
Hi Captain, I know I'm several years late but this video has been helpful when modifying my own Twinshock. How did you get the stock springs off the plungers? I can't seem to find a way to get the plungers off so the springs can come off.
If no brass to fit megas, is there alluminium tube that may work? 25mm orange electrical conduit works as a barrel for mega darts i know that much and is a nice fit which i use in a buzz bee ultimate missile blast tanked longshot for single sniper shot.
Captain Xavier .98 of an inch electrical conduit outside diameter has an inner diameter perfect size for megas and is orange in colour. Just flare out start of pipe to allow easy insert of dart.
Everyone else with the Tri-Break: I wonder what cool things I can do with this! Holster, shells, dart conversion... Captain Xavier: But can it take a K26?
Possible suggestion: with my modded mega darts I put in a dart tip like from xplorer x-tips (pushed through the little holes in the mega dart tip) to help give the megas a bit more weight and accuracy, while not nullifying the point of modding the mega blaster.
is it possible to modify the rotofury to use flywheels instead of plunger tubes to effectively make it a mega barricade? because it would probably be extremely effective. Also, has anyone made the mastodon fire rival ammo yet
I will say what I always say to these "is it possible" questions. We literally have spaceships, back-flipping robots, and self-driving cars....so yes...it is possible. ;) And I have not heard of anyone making a Mastodon fire rival.
So, if/when the twinshock dies, I think that would be an amazing platform for dual panther tanks... I know air power doesnt play well with smart AR's on elite blasters, but maybe it would work better on mega, being there is a bigger airway?
Captain Xavier that's a good idea, and if your good enough you could in theory always have a tank full, half pull, wait a tick, full pull. I might need to get me a twinshock now, I was gonna avoid it because I didn't care for the looks but I like that idea.
holy crud I did the same thing and it couple of shots almost broke my handle stress factors so you are the Magic k-26 Man, and how did you get the back of that off so easy it look like yours wasn't even solvent welding LOL my must have been made slightly different.
Brass barrels make an air tight seal around the dart so that when it fires, all the air is pushed out from behind the dart giving it the maximum amount of power.
Hey comment section, I'm planning to get a Caliburn for my birthday and I doubt that K26 and K25 are not healthy for 13-15 year olds, could someone find me a source for a spring around the same strength of a hammer shot? (With a link to the item page)
@@CaptainXavier im talking about retaliator spring upgrade, like the 9kg spring from worker. Aliexpress does not sell any nerf springs but retaliator's. can it fit the plunger rod of the twinshock?
I still think that might be a downgrade. Mega blasters have really heavy springs because they fire such larger rounds. But they would probably fit but having never tried I cannot say for sure. If anything they might be too short.
Twinshocks area to the aft of the grip turns out to be empty. Nerf wasted a lot of space there. They could have shorten the butt and give it stock attachment instead.
Nice to see these and how you worked them. I have worried about getting into the TwinShock because I have seen/heard that it is complicated. Also that it has issues going back together with K26 in it. Any advice? P.S.: I saw the news video, great job!
Make it shoot demolished rockets, and reload off of a spring double pump system, with stock attachment with less body, and centurion style handle/stock #Modular
Oh I understood, you. You want to know if you replaced the spring in a Rival mag with K26 if it would make it fire faster and prevent jams. Yes. It will eliminate feeding issues completely by making it so it will not hold even a single HIR. K26 is way WAY too strong to replace a mag spring. Mag springs are extremely light. Putting a K26 in makes it so you cannot put even a single round it without the spring just pushing it right back out.
Captain Xavier very happy for you, you're by far my favorite nerftuber because of your ability and overall nerdiness, keep up the good work and I look forward to many future mods and Lego builds
Hey why don’t you take the K26 twinshot remove the pegs and make it a rival shotgun? I bet with K26 you could double or even triple your load. Especially since there actually isn’t a Rival shotgun really.
You know a sidestrike will take K26 but the rod and slide needs reinforcing, after the 100th shot the catch can fail but just keep lubing it up and don't over do it and it'll last
Dude that intro is great, comedy is always a good way to start out a video to set the mood of things.
Agreed
yes
“ITS SO SMOOTH!” -coop772 reviewing the Twinshock
I needed this video more than ya think. Thanks Captain. I’ve just been a little slumped.
I don't deserve subs I tried it but the plunger rod was too wide
( ͡° ͜ʖ ͡°)
another cool idea is turn the "shroud" for the tri-break into a holster for it. I mean, it would probably be easy.
I like that.
Captain Xavier I’ll hold your skittles and root beer
That is a very good idea, try it!
That's very clever!
I loved your little interview with Tier
Thanks! (It is Týr)
Captain Xavier I tried so hard
Tier is a word...it just isn't how you spell the name of the Norse God of War. :)
Captain Xavier it’s cool where the whole captain Xavier character originated I do a little re-enactment myself but it’s all Wild West oriented
If you want more of the story I have an Origin of Captain Xavier video over on my Lego Channel. :P Wild West re-enactment is cool! And apparently very popular in Germany...
you should put the tri break's plunger tube in the death trooper blaster
Saw your interview :D too cool! Hard work pays off!
:D
Ahhh, nice. I put a Kronos spring in mine, but I didn't even try to put it over the stock spring, I just switched them out. Have you run it through your Chronograph? I'd love to know what numbers you're getting! And definitely take the break action shroud thing off, I did with mine and there's no going back!
Nerf Gun Attachments I was actually going to suggest he check out what you did with the shroud. When I get around to picking one or two up, that is what I want to do.
Cool, thanks. He makes me want to go back to mine and try to double up the springs like he does here --- wonder what the performance would be!
I really liked the music for this one
Yes please more stock attachment points!!!! And i agree i like horizontal pump grips more than pistol grips, although i do like the occasional vertical pump
It all depends on the blaster. :)
Very true
Hey Captain, you may want to revisit the upgraded twinshock with the new mega accustrike rounds.
Hey cap!
I saw you on the news!
pignessman 7 can i have a link to the video
ua-cam.com/video/zo2Em6krOPk/v-deo.html
:D
I’m wondering if you can’t turn the Tri-Break shroud into a separate holster of some sort.
I have a plan once I can get my hands on a tribreak and its to modify it to be a shotgun and after it fires the darts the front end springs open and so its gonna be a lot of testing but it seems useless but fun anyways lol
Hey Cap, have you heard about the Infimus? Apparently, it has a system for topping up its magazine, like a Quick 16 with removable mags. It will apparently cost a fortune because Hasbro, but I think you will want to isolate that mechanism and figure out how to make one for EIR.
I have seen the speculation videos but I put little stock in speculation. I am looking forward to seeing it and if there is a new system I will certainly look into it. :)
ok thanks what would be a good predator stock replacement
I gust had a thort could it be posibul to buy wood will nerf blarsters from you for less than the original prise ??? :)
It just occurred to me that EIR does not have a 1969 NERF Indoor Ball firing attachment....
Pay up...lol
Yet...
You also need a gun thrower, boondocksaints!
As dangerous and illegal it would be, there should be an attachment that throws empty magazines.
Hi Captain, I know I'm several years late but this video has been helpful when modifying my own Twinshock. How did you get the stock springs off the plungers? I can't seem to find a way to get the plungers off so the springs can come off.
I probably threaded it off the side.
If no brass to fit megas, is there alluminium tube that may work?
25mm orange electrical conduit works as a barrel for mega darts i know that much and is a nice fit which i use in a buzz bee ultimate missile blast tanked longshot for single sniper shot.
If only I did not live in the land of the inch...
Captain Xavier .98 of an inch electrical conduit outside diameter has an inner diameter perfect size for megas and is orange in colour. Just flare out start of pipe to allow easy insert of dart.
Some one mentioned that. I will have to try and find some. The issue is fitting that into an existing barrel.
Everyone else with the Tri-Break: I wonder what cool things I can do with this! Holster, shells, dart conversion...
Captain Xavier: But can it take a K26?
Possible suggestion: with my modded mega darts I put in a dart tip like from xplorer x-tips (pushed through the little holes in the mega dart tip) to help give the megas a bit more weight and accuracy, while not nullifying the point of modding the mega blaster.
Cool!
I strive to one day be like you you are a rolemodle for me thanks for all the lovely uploads
Hey Capt... Can you rebarrle the tri break to take stefens? And have a brass breach?
+Maxzinus night Fury I don't see why not.
But can the tribreak take the thunderbow 5dart barrel? With some hacking up of the front end?
Probably
A new series by capt xavier: can it take a thunderbow?
my fav show on the net YAY you do you Captaining
:D
How is th twinshock holding up with k26?
is it possible to modify the rotofury to use flywheels instead of plunger tubes to effectively make it a mega barricade? because it would probably be extremely effective. Also, has anyone made the mastodon fire rival ammo yet
I will say what I always say to these "is it possible" questions. We literally have spaceships, back-flipping robots, and self-driving cars....so yes...it is possible. ;) And I have not heard of anyone making a Mastodon fire rival.
Where do I get the drain things for drain blasters like in the modular shotgun
Ebay, Amazon, Home Depot
When are you going to get the 3D printers
+kid fury I already have them...
Captain Xavier can you make a video about them
I wonder what kind of ranges the Tri-break would get if it were re-barreled for elites after removing the stupid barrel shroud :-?
I suspect it would be quite impressive.
So, if/when the twinshock dies, I think that would be an amazing platform for dual panther tanks... I know air power doesnt play well with smart AR's on elite blasters, but maybe it would work better on mega, being there is a bigger airway?
Hey, you might even be able to fit dual XBZ's and a compressor in a shell that big. :D
Captain Xavier that's a good idea, and if your good enough you could in theory always have a tank full, half pull, wait a tick, full pull. I might need to get me a twinshock now, I was gonna avoid it because I didn't care for the looks but I like that idea.
Have you tried taping over the whistler hole on regular megas to see if it changes performance at all?
The buzz bee clip tek is like the rapid fire tek, but is direct primed via slide on the top of the blaster (where the plunger tube is)
Hey cap why don't you take out the flipping part out of the tri blast to make it smaller
I probably will...but that was not the point of this video...
Captain Xavier oh sry
Too bad that we couldn’t make the twinshock shoot elites
But how much K26 in length did you put inside ?
Also,wat catch spring should i use for a big bag bow with stock,3.2 inches of k26 and a alpha trooper spring ,thanks
+RA- MEME one that works? I like Fastenal #155
holy crud I did the same thing and it couple of shots almost broke my handle stress factors so you are the Magic k-26 Man, and how did you get the back of that off so easy it look like yours wasn't even solvent welding LOL my must have been made slightly different.
*shrugs*
I'm loving the new intros Captain
:D
Is there a way to make the break action prime the blaster?
Spaceships, robots, self-driving cars. Anything is possible. Would it be easy? No.
How much K26 does the Twin Shock take? would one length from Outofdarts, cut in half, be enough?
Yes. And I cut it the minimum length to not have spring rattle
Good to know, thanks.
What is the length/coil number for the Twinshock's K26?
*holds fingers a bit apart* About that long.
The minimum length to not have spring rattle.
do you know when Outofdarts new Heir mini is coming out
Nope
cap do you know of any way to make a centurion barrel into an nstrike attatchment
+ant yes...add an N-strike barrel attachment socket.
I like the break action. It’s a nice aesthetic
Hey I was wondering.... what's the point of brassing a nerf barrel or replacing a nerf barrel with a brass barrel?
Brass barrels make an air tight seal around the dart so that when it fires, all the air is pushed out from behind the dart giving it the maximum amount of power.
Captain the first Blaster you featured do you think it is possible to make a over under shotgun if you removed the bottom Barrel??
Probably
Captain Xavier do you think a buzz bee over under Barrel could fit a Mega Dart through it?
Probably not
Captain Xavier suggestions on barrels and maybe a stock?
Is there room for storage on the inside of tri break?
I pondered that. There is...but it would not be easy to get things out.
Can you do a k26 to a mega with elite convertors
yes
Do they shoot straight or do they fish tale
Depends on the darts. Accustrikes/fakes shoot straight. Elites not so much.
Thanks I used accufakes any
Hey comment section, I'm planning to get a Caliburn for my birthday and I doubt that K26 and K25 are not healthy for 13-15 year olds, could someone find me a source for a spring around the same strength of a hammer shot? (With a link to the item page)
Been waiting for this video
On the Twinshock, I think an angled grip would look better and be more comfortable with the barrels extending below the top of the priming handle.
What if you made the Twinshock a 10-shot shotgun with elites and a spring stronger than a K26?
Then you would have a 10 dart elite shotgun with a heavier spring...
@@CaptainXavier
I was just saying that I’d like to see that.
You could drill out the ARs and kill a whole horde of zombies in one shot.
the tri-break would really be cool if you could mod it to use Buzzbee shells. like a mini hand-cannon!
I would love to see that break thing singled. Kind of like a singled sledgefire
Are you going to try to turn that tri break into a pistol shotgun and to shoot rival balls ?
Nope. Smart ARs don't shotgun well. Too inefficient.
Captain Xavier well that sucks I do have a gun for a k-26 the surgefire
I've done a nerfturf twinshock, I knew things would get interesting when I saw the thumbnail... I'm up to 6:27, good luck with the hot water bath! >:)
EDIT: WTF my plungertube/endcap assembly was dunked in FLIPPING SOLVENT WELD! >:(
It took me FOREVER to get it out, and I burned my fingers!
*evil laugh
That’s a great into right there
Wish my son Brian was still alive to see that you were on cannda weekly he loved that channel and yours
Love the new intro, X-Man!
Thanks!
hey cap! does the twinshock accept retaliator spring upgrades?
That would probably be a downgrade honestly
@@CaptainXavier im talking about retaliator spring upgrade, like the 9kg spring from worker. Aliexpress does not sell any nerf springs but retaliator's.
can it fit the plunger rod of the twinshock?
I still think that might be a downgrade. Mega blasters have really heavy springs because they fire such larger rounds. But they would probably fit but having never tried I cannot say for sure. If anything they might be too short.
Can a surgefire take a k26
congrats on the daily planet segment!
+Slime Bucket thanks!
Can the Kronos take a k26 and also can the crossbolt take a k26.
I have done several videos on the Kronos, give them a look. I also covered the Crossbolt in my "fan request" video. Give it a look.
Loving the intro!!!!
:D
So is it true that you're coming down to Dallas this year? Me and the kids really hope so. They've been wanting to meet you for a good long time now.
Apparently... :D
Hey I saw you on discovery Canada! Good for you man!
:D
Dat intro do! Were u trying to see if a rapidstrike could take a K26?
SCIENCE!
Can you do the Trailblazer for a can it take a k26 episode Please?
Love the twinshock
New idea. Can it take a lipo? Like this series, but for flywheel blasters.
Twinshocks area to the aft of the grip turns out to be empty. Nerf wasted a lot of space there. They could have shorten the butt and give it stock attachment instead.
Right!?
A great use for the tri-break is to make it a mini shotgun, with no shells
What happened to that video you just uploaded, Cap?
I uploaded it on the wrong Channel. It is on my Lego Channel
Awesome new intro cap ;)
what w0uld you say is the best way to make sure you can pu a nerf gun back together i have had problems with my atlas it is not catching
You know...that would make a good mod tips video...
Mega stephens?
gotta say, that new intro is as funny as you Cap. :D
Glad it worked!
I like the vert grip, but it works better with how my wrist is
Nice to see these and how you worked them. I have worried about getting into the TwinShock because I have seen/heard that it is complicated. Also that it has issues going back together with K26 in it. Any advice?
P.S.: I saw the news video, great job!
I didn't have any issue at all so...I got nothing...
Captain Xavier Congrats on getting on the news!
I’ll have to do both mods 😁😁👍🏻👍🏻
Make it shoot demolished rockets, and reload off of a spring double pump system, with stock attachment with less body, and centurion style handle/stock #Modular
Cosmic Creator : A TwinShock plug-in for Elite missiles (a.k.a. Demolisher rockets) would be fuggin' sweet!! Totally wreck shield players!
What is your height and arm length? I have a project in mind for you.
5'11" in boots and my arm length is proportional to my size?
I love my tribreak its so fun and now I might mod it
For the lightake mega darts being to small you could mate the head of a lightake mega and the foam of a nerf mega
+Derpaknight 22 this is true! But a lot of work. Could be worth it though.
I would like to see another episode of star wars blasters
I need to hunt down a last few.
Yeah!
Thank god we have mega accustrike darts now.
Can a nerf rival magazine take a K26
I covered this in the "Fan Requests Video."
Captain Xavier there are so many videos I will be right back
yes it can
it was in one of the specials
Captain Xavier dear captain you have misunderstood can I put a K26 in the magazine so that I may eliminate all mag feeding issues
Oh I understood, you. You want to know if you replaced the spring in a Rival mag with K26 if it would make it fire faster and prevent jams. Yes. It will eliminate feeding issues completely by making it so it will not hold even a single HIR. K26 is way WAY too strong to replace a mag spring. Mag springs are extremely light. Putting a K26 in makes it so you cannot put even a single round it without the spring just pushing it right back out.
I like intro change thanks cap :)
Ah, I remember back in the day, episode 1 of can it take a k26, that's when I modded my first nerf gun, turbo-stocked my long-strike,
OMG cap congratulations man I saw you on discovery canada
Right?! And Gizmodo, and Popular Mechanics, and Army4Life, and Rated Red...the list goes one. But I think Discovery Channel was the coolest! :D
Captain Xavier very happy for you, you're by far my favorite nerftuber because of your ability and overall nerdiness, keep up the good work and I look forward to many future mods and Lego builds
Shorten the shroud? Stubby trishot-shotgun!
My guesses are no for the tri-break and yes for the twinshock.
Cap, I shaved my beard. But, I didn’t have a choice in the matter.
:(
Captain Xavier Thank you for your support on this trying time.
:(====
FTFY
Hey why don’t you take the K26 twinshot remove the pegs and make it a rival shotgun? I bet with K26 you could double or even triple your load. Especially since there actually isn’t a Rival shotgun really.
I doubt it would work honestly. The issue would be the SMART AR system.
nice vid cap
Could you not take the post out and use a couple of rival balls in each barrell and then you would have a real good shot gun but close range.
I doubt it would work. It would probably just jam.
try it...I bet you will be surprised.
You know a sidestrike will take K26 but the rod and slide needs reinforcing, after the 100th shot the catch can fail but just keep lubing it up and don't over do it and it'll last
Yay